Oil and Gas

Course catalogue

hits
448
Course code: MUK-054
Course type: E-learning course
Duration: 30 minutes
Language: English

Who is this course for?

All personnel who are involved in the transportation or supporting of a load by hand or bodily force.

Is previous experience required?

No previous experience is required to complete this course. 

How will this course benefit me?

To increase learners’ awareness of the importance of safe manual handling operations and the risks involved with manual handling.

How will this course benefit my company?

This course will benefit a company by reducing manual handling accidents.

What standards are referred to in this course?

No standards or regulations are referenced in this course.

Is there an assessment?

Yes

Course code: RV-COR1
Course type: E-learning course
Duration: 7 Minutes
Language: English
Course code: MUK-026
Course type: E-learning course
Duration: 45 minutes
Language: Brazilian Portuguese

Course goal: This course aims to introduce, develop and increase learners’ knowledge and awareness of the importance of Risk Assessment and how it can reduce the likelihood of accidents in the workplace. 

Learning Objectives

LO1  Explain the principles of, and steps involved in, the Risk Assessment process

LO2  Explain that employers have a responsibility for completing Risk Assessments and that employees have a duty to follow Risk Assessment outcomes 

LO3  Identify a typical Risk Assessment form    

LO4  Explain the requirements of the Risk Assessment team 

LO5  Recognise and explain Risk Assessment terminology

LO6  Identify the different steps within the Risk Assessment process 

LO7  Identify common, industry-specific hazards

LO8  Determine the appropriate level of Risk Assessment that may be required

LO9  Explain how to use a Risk Matrix to evaluate the level of risk

LO10  Explain how to identify appropriate control measures based on the Hierarchy of Control

LO11  Explain what is meant by ‘Initial Risk’ and ‘Residual Risk’

LO12  Describe what to do if any Residual Risk remains too high

LO13  Explain how to carry out a Personal Risk Assessment and recognise its importance before each task 

LO14  Explain the importance of Dynamic Risk Assessment  

LO15  Identify situations where ‘Stopping the Job’ may apply

LO16  Explain the importance of communicating the outcomes of a Risk Assessment  

LO17  Understand the importance of communicating ‘Lessons Learned’

Course code: MUK-004
Course type: E-learning course
Duration: 30 Minutes
Language: Brazilian Portuguese

Course goal: This course provides learners with an awareness of the COSHH regulations, and how they control work with hazardous substances.

Learning Objectives

LO1 Explain the COSHH regulations and their applicability to the Oil and Gas Industry

LO2 Explain the legal obligations under COSHH for both employees and employers, and explain the REACH regulations

LO3 Explain the health effects of working with hazardous substances, and the various ways that these can enter the body

LO4 Explain the use of Safety Data Sheets, Labels and Assessments within the COSHH regulations

LO5 Explain the common labelling system and identify the standard symbols

LO6 Explain the appropriate use of Personal Protective Equipment

LO7 Explain requirements for storage, handling and disposal of hazardous substances

LO8  Define the control measures for handling hazardous substances and explain the control hierarchy

LO9 Explain the process for dealing with hazardous substances in the event of a spill

LO10 Define the recording and reporting process within the COSHH Regulations

Course code: MUK-017
Course type: E-learning course
Duration: 5 hours
Language: Brazilian Portuguese

Course goal: This course aims to provide the knowledge and techniques for carrying out gas testing.

 

This course contains the following sections:

 

Section 1: Introduction

Section 2: Hazards Associated with Gases and Vapours

Section 3: Flammable Atmospheres

Section 4: Fire and Explosions

Section 5: Toxic Atmospheres

Section 6: Oxygen Deficiency and Oxygen Enrichment

Section 7: The Hazards of Confined Spaces

Section 8: The Gas Monitor

Section 9: Using Gas Testing Equipment when Carrying out Fire Watch Duties

Section 10: Using the Gas Testing Equipment to Clear an Area Prior to Hot Work

Section 11: Using the Gas Testing Equipment to Identify a Potential Gas Leak

Section 12: Using the Gas Testing Equipment to Test the Atmosphere of a Confined Space Prior to Entry

Section 13: Using the Gas Testing Equipment during Purging Operations

Section 14: Final Assessment

Course code: MUK-131
Course type: E-learning course
Duration: 15 Minutes
Language: English

Who is this course for?

Personnel requiring an awareness and understanding of common storage and handling methods for explosives.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

 

How will this course benefit me?

This course aims to provide learners with an overview of the requirements for storing, transporting and handling explosives.

 

How will this course benefit my company?

By ensuring you have an overview of the requirements for storing, transporting and handling explosives.

 

What standards are referred to in this course?

Regulation 2 ER2014 

International Carriage of Dangerous Goods by Road (ADR)

United Nations Classification of Explosives

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MUK-160
Course type: E-learning course
Duration: 30 minutes
Language: English

Who is this course for?

Personnel requiring an awareness or understanding of the change management process.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

 

How will this course benefit me?

This course aims to provide an overview of management of change. The course focuses on the steps of the management of change process, the roles and responsibilities of personnel, and the risks involved in change management and their associated control measures.

 

How will this course benefit my company?

By ensuring you have an overview of the management of change process.

 

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MUK-025
Course type: E-learning course
Duration: 30 minutes
Language: English

Who is this course for?

Personnel who require knowledge or awareness of hydrates.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

 

How will this course benefit me?

This course aims to provide awareness of how gas hydrates may be formed and the effects that they can have on pipeline flow assurance. The course examines what hydrates are, how they are formed and their molecular structure. It discusses flow assurance, details the risks of pipeline plugging by hydrates, and outlines the various methods of controlling hydrate formation.

 

How will this course benefit my company?

By ensuring you are aware of how gas hydrates may be formed and the effects that they can have on pipeline flow assurance.

 

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MGM-018
Course type: E-learning course
Duration: 40 minutes
Language: English

Who is this course for?
All relevant personnel.

Is previous experience required?
You do not need prior knowledge or experience to complete this course.

How will this course benefit me?
This course provides drug and alcohol awareness, information on company policies, and the effects of alcohol abuse, illegal drug use, and the abuse of prescription drugs.

How will this course benefit my company?
By ensuring you have a basic understanding of the drug and alcohol awareness, information on company policies, and the effects of alcohol abuse, illegal drug use, and the abuse of prescription drugs.

What standards are referred to in this course?
N/A

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Course code: MUK-005
Course type: E-learning course
Duration: 30 minutes
Language: English

Who is the course for?

Personnel who require an understanding of fire awareness as part of their role.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course aims to introduce, develop and increase learners’ knowledge and awareness of the importance of maintaining fire awareness and the actions to take in the event of an emergency.

How will the course benefit my company?

The course will benefit companies’ by helping to reduce fire related incidents by providing personnel with an awareness of actions to take in the event of an emergency.

What standards are referenced in the course?

Health and Safety at Work Act

The Management of Health and Safety at Work Regulations

The Regulatory Reform (Fire Safety) Order

The Fire (Scotland) Act

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.


Accreditation:

This course is approved by the Institution of Occupational Safety and Health (IOSH).

IOSH is the world’s Chartered body for safety and health professionals.


What that means:

We are the largest membership body for health and safety professionals.

We champion occupational safety and health causes and advocate for change.

We advise governments, NGOs and policymakers.

We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

We commission research and set national and international standards.

We shape the future of the profession.

 

Course code: MUK-110
Course type: E-learning course
Duration: 1 hour
Language: English

Who is this course for?

Personnel who require an awareness or understanding of the accident and incident investigation processes.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

 

How will this course benefit me?

This course aims to provide learners with an overview of industry best practice in relation to accident and incident investigation

 

How will this course benefit my company?

By ensuring you have an overview of industry best practice in relation to accident and incident investigation

 

What standards are referred to in this course?

Reporting of Injuries

Diseases and Dangerous Occurrences Regulations (RIDDOR) 2013

HSG245, Management of Health and Safety at Work Regulations 1999

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: KYS-001
Course type: E-learning course
Duration: 3-5 hours
Language: Norwegian

This course was first developed in 2014 by the laboratory company Kystlab AS, which was our company name back then. The scaling and development of our company have included both mergers and shareholder changes, and our name is now Nemko Norlab AS – a part of renowned Nemko Group. We are still the largest, Norwegian owned laboratory company, and “Clean water offshore” is still based on our company´s year-long experience with water laboratory analysis, including potable water offshore. In Nemko Norlab the scientific know-how is further strengthened, and the service portfolio to the offshore segment expanded significantly. All together we now conduct over 100.000 routine analyses annually related to drinking water.

 

New in the 5th Edition

- As with the Covid-19 virus, the focus on the lethal shower microbe Legionella is increasing offshore due to the risk of disease outbreak. The training course has therefore been further strengthened to prevent Legionella disease.

- The course is also updated according to new recommendations for the annual sampling program, changes that potentially will lower analysis costs.

- This edition has also been updated in accordance with current regulations, including an important change in authority responsibility. The Institute of Public Health is no longer responsible for anything offshore.

 

General course info

 - The course is well illustrated to provide the best possible understanding and interpretation of the comprehensive regulations.

- There are intuitive and useful exercises throughout the course. The course is available in both Norwegian and English.

- Based on «Safe, Sufficient and Good Potable Water Offshore», the course highlights situations the participant typically may encounter in everyday work.

 

For more info:

- Contact your Mintra Key Account Manager to order course licenses.

- Contact anne.kristin.gussias@nemkonorlab.com for professional inquiries.

 

Please note: this course is also available in an Norwegian-language version.

The course is delivered by the accredited laboratory SINTEF NORLAB AS. 

Course code: MUK-206
Course type: E-learning course
Duration: 45 minutes
Language: English (US)

Who is this course for?

Personnel requiring an awareness or understanding of US best practice for protecting hearing from noise hazards.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

 

How will this course benefit me?

This course aims to ensure that relevant personnel in the US have a common and consistent understanding of noise hazards and their effects on you.

 

How will this course benefit my company?

By ensuring you have a common and consistent approach to company and industry best practice in relation to US specific ways to protect from noise hazards.

 

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MUK-219
Course type: E-learning course
Duration: 45 minutes
Language: English (US)

Who is this course for?

Personnel requiring awareness or undertanding of LOTO in the US.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

 

How will this course benefit me?

To ensure that relevant personnel have a common and consistent approach to industry best practice in relation to US LOTO controls.

 

How will this course benefit my company?

By ensuring you have an overview of industry best practice in relation to LOTO controls.

 

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MTP-075
Course type: E-learning course
Duration: 40 Minutes
Language: English (US)

This course aims to provide an overview of US best practice in relation to drug and alcohol awareness in the workplace.


How will this course benefit my company?

This course provides drug and alcohol awareness, information on company policies, and the effects of alcohol abuse, illegal drug use, and the abuse of prescription drugs.


How will this course benefit me?

This course aims to provide an overview of US best practice in relation to drug and alcohol awareness in the workplace.


This course provides drug and alcohol awareness, information on company policies, and the effects of alcohol abuse, illegal drug use, and the abuse of prescription drugs. It is designed to enable you to:

• Identify various types of common drugs

• Be familiar with drug and alcohol laws and regulations

• Find company policies on alcohol and controlled substances

• Explain the various methods of alcohol and drug testing routinely used in the workplace

 

Course code: MUK-108
Course type: E-learning course
Duration: 30 minutes
Language: English

Who is this course for?

All relevant personnel, including work party members, Performing Authorities and Area Authorities

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

 

How will this course benefit me?

This course aims to provide the knowledge and techniques for carrying out effective toolbox talks

 

How will this course benefit my company?

By ensuring you have knowledge and know of techniques for carrying out effective toolbox talks

 

What standards are referred to in this course?

Control of Substances Hazardous to Health (COSHH) assessment

Safety Data Sheets (SDS)

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

 

Course code: MUK-138
Course type: E-learning course
Duration: 15 minutes
Language: English

Who is this course for?

All personnel who work in a role within the Oil and Gas Industry that may have an impact on the environment.

 

Is previous experience required?

No previous experience is required to complete this course.

 

How will this course benefit me?

This course aims to provide an introduction to the issues involved with successful environmental management in the Oil and Gas Industry.

 

How will this course benefit my company?

The course will benefit companies by ensuring that all relevant personnel have an understanding of the issues involved with successful environmental management in the Oil and Gas Industry, which will help to protect the environment.

 

What standards are referred to in this course?

• Department of Energy and Climate Change (BEIS (formally DECC))

• The Scottish Environment Protection Agency (SEPA) in Scotland

• The Environment Agency (EA) in England, Wales and Northern Ireland

• ISO 14001 Environmental Management Systems (EMS)

• British Standard Institute's BS7750 - Specification for Environmental Management Systems (BS11994)

• Integrated Pollution Prevention and Control (IPPC) Directive

• Control of Major Accident Hazards (COMAH) Regulations

 

Is there an assessment?

No

Course code: MUK-189
Course type: E-learning course
Duration: 30 minutes
Language: English

This course aims to provide all relevant personnel with the knowledge required to understand the hazards and controls associated with the use of abrasive wheels.

 

Learning Objectives

- Explain what is meant by the term ‘Abrasive Wheel’

- Describe typical regulatory requirements for abrasive wheels

- Give examples of different types of abrasive wheels

- Explain how abrasive wheels operate

- Explain the importance of using guards during grinding operations

- Explain the requirements for portable and hand-held grinding machines

- Explain the main hazards of grinding operations

- Give examples of common problems faced when using abrasive wheels

- Explain what the PPE requirements are during grinding operations

- Identify the safety measures that must be in place during grinding operations

 

Course code: MUK-200
Course type: E-learning course
Duration: 45 minutes
Language: English (US)

Who is this course for?

All personnel who could potentially be exposed to H2S in the workplace.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course aims to give offshore personnel the knowledge required to understand the hazards and controls associated with working in an environment where they could potentially be exposed to H2S.

How will this course benefit my company?

By ensuring you are aware of the hazards and controls associated with H2S exposure, which will in turn reduce incidents and accidents offshore.

What standards are referred to in this course?

Occupational Safety and Health Administration (OSHA)

US National Institute for Occupational Safety (NIOSH)

American Conference of Government Industrial Hygienists (ACGIH)

Is there an assessment?

Yes

Course code: MTP-038
Course type: E-learning course
Duration: 45 minutes
Language: English, Norwegian

Who is this course for?

All employees at all levels of the organisation.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

 

How will this course benefit me?

Insufficient understanding of risk often leads to delayed projects, accidents and other unwanted incidents.

This course provides a basic understanding of what risk is, how it can be managed and how understanding risk helps us make better decisions.

 

How will this course benefit my company?

By ensuring you are aware and have a basic understanding of what risk is and how to manage risk. 

 

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

 

Is there an assessment?

There is no exam upon completion of this course.

Hits per page
| 5 ... |