Oil and Gas

Course catalogue

hits
448
Course code: MGM-007
Course type: E-learning course
Duration: 40 minutes
Language: English, Norwegian

Who is this course for?

This course is relevant for all personnel who may affect or be affected by cyber security.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course. 

 

How will this course benefit me?

This course aims to provide learners with an introduction to cyber-security and cyber-risks, and how by improving personal awareness of cyber-risks can improve cyber-security overall.

 

How will this course benefit my company?

By ensuring you are aware of the cyper-risks. 

 

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MUK-001
Course type: E-learning course
Duration: 45 Minutes
Language: English

Who is the course for?

All personnel involved with confined space entry work.

 

Is previous experience required?

No previous experience is required to complete this course. 

 

How will the course benefit me?

This course aims to provide learners with an overview of industry best practice in relation to confined space entry work.

 

How will the course benefit my company?

The course will benefit companies by reducing confined space entry related injuries.  

 

What standards are referenced in the course?

Confined Space Regulations

Management of Health and Safety at Work Regulations

Control of Substances Hazardous to Health Regulations  

Personal Protective Equipment at Work Regulations 

Provision and Use of Work Equipment Regulations 

Electricity at Work Regulations 1989 

Workplace (Health, Safety and Welfare) Regulations  

The Management of Health and Safety at Work Regulations

EH40/2005 

Health and Safety Executive

 

Is there an assessment?

Yes

 

Accreditation:

This course is approved by the Institution of Occupational Safety and Health (IOSH).

IOSH is the world’s Chartered body for safety and health professionals.

 

What that means:

• We are the largest membership body for health and safety professionals.

• We champion occupational safety and health causes and advocate for change.

• We advise governments, NGOs and policymakers.

• We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

• We commission research and set national and international standards.

• We shape the future of the profession.

Course code: MGM-039
Course type: E-learning course
Duration: 25 minutes
Language: English

Who is this course for?

Maritime personnel who require an introduction to or awareness of Health and Safety Management Systems.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course. 

 

How will this course benefit me?

This course aims to provide an introduction to ISO 45001 and Occupational Health and Safety Management in the Maritime Industry.

 

How will this course benefit my company?

By ensuring you are aware of the ISO 45001 and Occupational Health and Safety Management.

 

What standards are referred to in this course?

ISM Code and ISO 45001

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Course code: MUK-006
Course type: E-learning course
Duration: 20 Minutes
Language: English

Who is the course for?

All personnel involved in the transportation or supporting of a load by hand or bodily force.

 

Is previous experience required?

No previous experience is required to complete this course.

 

How will the course benefit me?

The aim of this course is to increase learners’ awareness of the importance of safe manual handling operations and the risks involved with manual handling. The course also aims to outline best practices for the correct handling techniques for safe lifting; and for the pushing and pulling of loads.

 

How will the course benefit my company?

This course will benefit your company by reducing manual handling accidents.

 

What standards are referenced in the course?

• The Manual Handling Operations Regulations

• The Management of Health and Safety at Work Regulations

• Health and Safety at Work Act

• Health and Safety Executive (HSE)

 

Is there an assessment?

Yes

 

Learning objectives

- Recall what is meant by the term ‘manual handling’

- Identify the types of injuries that may result from manual handling operations

- Identify the legislation that is in place to regulate manual handling operations

- Identify the duties that are placed on employers and employees by the Manual Handling Operations Regulations

- Recognise the types of risk assessment which are relevant to manual handling operations

- Identify factors to consider when assessing manual handling operations to reduce the potential risks of injury

- Identify good handling techniques for the safe lifting of loads

- Identify good handling techniques for pushing and pulling loads

 

Accreditation:

This course is approved by the Institution of Occupational Safety and Health (IOSH).

IOSH is the world’s Chartered body for safety and health professionals. 

 

What that means:

• We are the largest membership body for health and safety professionals.

• We champion occupational safety and health causes and advocate for change.

• We advise governments, NGOs and policymakers.

• We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

• We commission research and set national and international standards.

• We shape the future of the profession.

Course code: MUK-003
Course type: E-learning course
Duration: 45 minutes
Language: English

Who is this course for?

All relevant offshore personnel.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course aims to give offshore personnel the knowledge required to understand the hazards and controls associated with working in an environment where they could potentially be exposed to H2S.

How will this course benefit my company?

By ensuring you are aware of the hazards and controls associated with H2S exposure, which will in turn reduce incidents and accidents offshore.

What standards are referred to in this course?

Health and Safety at Work Act 1974

Offshore Installations (Safety Case) Regulations 2005

Offshore Installations (Prevention of Fire and Explosion, and Emergency Response) Regulations 1995 (PFEER)

Offshore Installations and Wells (Design and Construction) Regulations 1996

CoSHH 2002

EH40 Workplace Exposure Limits (WELs)

Is there an assessment?

Yes


Accreditation:

This course is approved by the Institution of Occupational Safety and Health (IOSH).

IOSH is the world’s Chartered body for safety and health professionals.

 

What that means:

We are the largest membership body for health and safety professionals.

We champion occupational safety and health causes and advocate for change.

We advise governments, NGOs and policymakers.

We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

We commission research and set national and international standards.

We shape the future of the profession.

Course code: MGM-062
Course type: E-learning course
Duration: 30 minutes
Language: English

Who is the course for?

All crew.

 

Is previous experience required?

No previous experience is required to complete this course.

 

How will the course benefit me?

By providing you with an awareness of the importance of maintaining high standards of personal hygiene and housekeeping onboard a vessel.

 

How will the course benefit my company?

Poor standards of personal hygiene and housekeeping can spread disease and create an uncomfortable environment for all crewmembers. Making personnel aware of how to look after themselves, their cabins and the communal spaces onboard can help to create a happier, healthier and more productive crew.

 

What standards are referenced in the course?

This course does not refer to specific legislation or standards.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Course code: MGM-027
Course type: E-learning course
Duration: 20 minutes
Language: English

Who is this course for?

All shipboard and shore-based personnel involved in shipboard garbage management.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

By providing you with an overview of the importance of garbage management and how to complete the Garbage Record Book.

How will this course benefit my company?

By ensuring personnel are aware of the importance of garbage management and how to complete the Garbage Record Book to comply with international requirements.

What standards are referred to in this course?

• International Convention for the Prevention of Pollution from Ships (MARLPOL)

• Resolution MEPC.314(74) Amendments to the Annex of MARPOL

• Resolution MEPC.312(74) Guidelines for the use of electronic record books under MARPOL

Is there an assessment?

Yes

Course code: MUK-010
Course type: E-learning course
Duration: 35 minutes
Language: English

Who is the course for?

All personnel who require an awareness of the hazards involved in working at height.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

By increasing your awareness of the potential hazards of working at height and the steps that can be taken to reduce your risk of injury.

How will the course benefit my company?

This course is aligned to industry best practice and aims to make personnel aware of the potential hazards of working at height and the controls that can be implemented to reduce risk.

What standards are referenced in the course?

Work at Height Regulations

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.


Accredidation:

This course is approved by the Institution of Occupational Safety and Health (IOSH).

IOSH is the world’s Chartered body for safety and health professionals.

 

What that means:

We are the largest membership body for health and safety professionals.

We champion occupational safety and health causes and advocate for change.

We advise governments, NGOs and policymakers.

We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

We commission research and set national and international standards.

We shape the future of the profession.

Course code: MTP-066
Course type: E-learning course
Duration: 10 minutes
Language: English (UK), Norwegia ...

Who is this course for? 

This course is aimed at personnel who do not routinely process personal data.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

 

How will the course benefit me?

Complying with the GDPR is mandatory for organisations processing personal data in the EU or EEA and for organisations processing the personal data of EU and EEA residents from abroad. This course raises awareness of the principles and rights enshrined in the GDPR and the obligations organisations have to comply with it.

 

How will the course benefit my company?

It will ensure you have an awareness of the principles and rights in the GDPR and their importance.

 

What standards are referenced in the course? 

• The EU General Data Protection Regulation (GDPR)

 

Is there an assessment?

No

Course code: MUK-105
Course type: E-learning course
Duration: 75 Minutes
Language: English

Who is this course for?

This course is aimed at individuals who are responsible for the ongoing monitoring of hot work sites.

 

Is previous experience required? 

You do not need prior knowledge or experience to complete this course. It is assumed that you are competent in your designated role.

 

How will the course benefit me?

This course will provide you with the skills required to safely carry out the role of a Gas Monitor.

 

How will the course benefit my company?

This course aims to ensure that personnel are provided with the knowledge and techniques necessary to carry out gas monitoring at hot work sites.

 

What standards or regulations are referenced in the course?

• The Health and Safety at Work Act

• The Management of Health and Safety at Work Regulations 

• The Control of Substances Hazardous to Health Regulations (COSHH) 

• The Offshore Installations (Prevention of Fire and Explosion, Emergency Response - PFEER) Regulations 

• Confined Space Regulations

• EH40 Workplace Exposure Limits (WELs)

 

Is there an assessment?

Yes

Course code: MGM-026
Course type: E-learning course
Duration: 20 minutes
Language: English

Who is the course for?

Deck Management, Deck Crew, Engine Management and Shore based Personnel.

Is previous experience required?

No previous experience is required.

How will the course benefit me?

Providing you with an awareness of the importance of maintaining the maritime Oil Record Book.

How will the course benefit my company?

Ensuring personnel are familiar with the need to complete the Oil Record Book to comply with international requirements.

What standards are referenced in the course? International Convention for the Prevention of Pollution from Ships (MARPOL)

International Safety Management (ISM) Code 

Is there an assessment? 

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

 

Course code: MUK-022
Course type: E-learning course
Duration: 30 minutes
Language: English

Who is this course for?

All personnel who may be exposed to asbestos at, or above, the permissible exposure levels, and personnel who perform housekeeping or maintenance operations in areas that have asbestos-containing materials and potential asbestos-containing materials.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course aims to provide learners with an understanding of the hazards associated with exposure to asbestos.

How will this course benefit my company?

This course will benefit a company by ensuring learners have the knowledge to protect themselves from exposure to asbestos.

What standards are referred to in this course?

The Asbestos Industry Regulations 1931

Asbestos (Prohibitions) Regulations 1985

Control of Asbestos Regulations

The European Union’s directive

Is there an assessment?

Yes.


Accreditation:

This course is approved by the Institution of Occupational Safety and Health (IOSH).

IOSH is the world’s Chartered body for safety and health professionals.

What that means:

We are the largest membership body for health and safety professionals.

We champion occupational safety and health causes and advocate for change.

We advise governments, NGOs and policymakers.

We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

We commission research and set national and international standards.

We shape the future of the profession.

 

Course code: MUK-132
Course type: E-learning course
Duration: 45 minutes
Language: English

Who is this course for?

All personnel involved with helicopter operations, particularly in the offshore sector.

 

Is previous experience required?

No previous experience is required to complete this course.

 

How will this course benefit me?

Transporting dangerous goods by air has the potential to cause significant harm to people, property and the environment. By following the Dangerous Goods Regulations (DGR), you will significantly decrease the risks and be able to transport such goods safely.

 

How will this course benefit my company?

All personnel are required to undertake competence-based DGR training relevant to their function. This course provides introductory-level awareness in the IATA training framework for personnel involved with helicopter operations.

 

What standards are referred to in this course?

• International Civil Aviation Organization (ICAO) Technical Instructions for the Safe Transport of Dangerous Goods by Air

• International Air Transport Association (IATA) Dangerous Goods Regulations

• International Atomic Energy Agency (IAEA) Regulations for the Safe Transport of Radioactive Material

• European Union Aviation Safety Agency (EASA) Air Operations Acceptable Means of Compliance Part-SPA.DG.105(a)

 

Is there an assessment?

Yes

Course code: MTP-059
Course type: E-learning course
Duration: 30 minutes
Language: English, Norwegian, Br ...

Who is this course for?
All employees.

Is previous experience required?
No prior knowledge or experience is required to complete this course.

How will this course benefit me?
The course will help learners become aware of aspects relating to anti-corruption and anti-bribery as well as providing an overview of the relevant legislation. 

How will this course benefit my company?
By ensuring learners are aware of aspects relating to anti-corruption and antibribery.

What standards are referred to in this course?

• United Nations Convention against Corruption (UNCAC)

• OECD Anti-Bribery Convention

• US Foreign Corrupt Practices Act

• US Foreign Corrupt Practices Act (FCPA)

• UK Bribery Act

• German Anti-Corruption

• Norwegian Penal Code


Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MUK-009
Course type: E-learning course
Duration: 20 minutes
Language: English

Who is this course for?

All personnel who could potentially be exposed to noise in the workplace. 

Is previous experience required?

No previous knowledge or experience is required to complete this course.

How will this course benefit me?

This course aims to provide personnel with the knowledge required to understand the hazards and controls associated with noise in the workplace.

How will this course benefit my company?

By ensuring personnel are aware of the hazards posed by noise in the workplace and the controls that should be put in place to minimise their exposure and reduce the risk of hearing loss.

What standards are referred to in this course?

Control of Noise at Work Regulations

Is there an assessment?

Yes

 

Accreditation:

This course is approved by the Institution of Occupational Safety and Health (IOSH).

IOSH is the world’s Chartered body for safety and health professionals. 

 

What that means:

We are the largest membership body for health and safety professionals.

We champion occupational safety and health causes and advocate for change.

We advise governments, NGOs and policymakers.

We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

We commission research and set national and international standards.

We shape the future of the profession.

Course code: MUK-031
Course type: E-learning course
Duration: 45 minutes
Language: English

Who is this course for?

Personnel who work at a site or location where there is a risk that objects could fall from height.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

Dropped objects can cause serious injuries as well as damage to assets and equipment. This course will give you a basic understanding of the common causes of dropped objects, their potential consequences and how they can be prevented.

How will this course benefit my company?

By ensuring that personnel are aware of the risk dropped objects present, their common causes and how they can be prevented.

What standards are referred to in this course?

Occupational Safety and Health Act (USA)

Health and Safety at Work Act (UK)

Is there an assessment?

Yes


Accreditation:

This course is approved by the Institution of Occupational Safety and Health (IOSH).

IOSH is the world’s Chartered body for safety and health professionals.

What that means:

We are the largest membership body for health and safety professionals.

We champion occupational safety and health causes and advocate for change.

We advise governments, NGOs and policymakers.

We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

We commission research and set national and international standards.

We shape the future of the profession.

 

Course code: MUK-004
Course type: E-learning course
Duration: 15 minutes
Language: English

Who is the course for? 

Personnel who are required to work with, or near to, substances hazardous to health.

 

Is previous experience required?

No previous experience is required to complete this course.

 

How will the course benefit me?

Many substances can cause harm to health if the appropriate precautions are not taken, including some substances that are not hazardous in themselves. This course will give you a basic overview of the COSHH regulations and how they help to protect workers. 

 

How will the course benefit my company? 

Ensuring personnel are familiar with the requirements of the COSHH Regulations will help to reduce the risk of accidents, incidents and injuries in the workplace.

 

What standards are referenced in the course?

The Control of Substances Hazardous to Health Regulations (COSHH).

 

Is there an assessment? 

Yes - This course has an assessment with a 80% pass mark and two attempts

 

Learning Objectives:

• Recognise why COSHH is important for protecting workers’ health

• Identify considerations for COSHH risk assessments

• Recognise control measures for mitigating risks from hazardous substances

Course code: MUK-017
Course type: E-learning course
Duration: 275 minutes
Language: English

Who is the course for?

Personnel responsible for conducting atmospheric testing at the worksite.

 

Is previous experience required?

No previous experience is required.

 

How will the course benefit me?

This course aims to provide the knowledge and techniques for carrying out gas  testing.

 

How will the course benefit my company?

By ensuring that personnel are aware of the situations and circumstances in   which a hazardous atmosphere could occur and the steps that should be taken   in an emergency.

 

What standards are referenced in the course?

Health and Safety at Work Act

CoSHH

PFEER

Management of Health and Safety at Work Regulations

EH40 Workplace Exposure Limits (WELs)

Confined Space Regulations

 

Is there an assessment? 

Yes

Course code: MUK-012
Course type: E-learning course
Duration: 30 minutes
Language: English

Who is the course for?

This course is aimed at all personnel involved in lifting operations in the Oil and Gas Industry.

 

Is previous experience required?

No previous experience is required to complete this course. 

 

How will the course benefit me?

This course provides learners with an awareness of the Lifting Operations and Lifting Equipment Regulations (LOLER) and gives an overview of industry best practice in relation to working with lifting equipment.

 

How will the course benefit my company?

By ensuring you have an awareness of the Lifting Operations and Lifting Equipment Regulations (LOLER) and the industry best practice in relation to working with lifting equipment.

 

What standards are referenced in the course?

Lifting Operations and Lifting Equipment Regulations (LOLER) 

Health and Safety at Work Act 

Management of Health and Safety at Work Regulations 

Provision and Use of Work Equipment Regulations (PUWER) 

 

Is there an assessment?

Yes

 

Accreditation

This course is approved by the Institution of Occupational Safety and Health (IOSH).

IOSH is the world’s Chartered body for safety and health professionals.

 

What that means:

We are the largest membership body for health and safety professionals.

We champion occupational safety and health causes and advocate for change.

We advise governments, NGOs and policymakers.

We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

We commission research and set national and international standards.

We shape the future of the profession.

Course code: MGM-029
Course type: E-learning course
Duration: 50 minutes
Language: English

Who is the course for? 

All ship officers and shore personnel who are involved in ship operations.

 

Is previous experience required? 

No previous experience is required to complete this course.

 

How will the course benefit me? 

The Ship Energy Efficiency Management Plan (SEEMP) is a management tool to assist shipowners, technical managers and the ship's personnel in managing the energy efficiency and air emissions of their ships. 

 

How will the course benefit my company? 

By ensuring you have an overview of the Ship Energy Efficiency Management Plan.

 

What standards are referenced in the course? 

  • The International Maritime Organization (IMO) Guidelines for the Development of a Ship Energy Efficiency Management Plan (SEEMP)
  • The IMO Fuel Oil Data Collection System (DCS)
  • The European Union Monitoring, Reporting and Verification (MRV) Regulation
  • The International Convention for the Prevention of Pollution from Ships (MARPOL)
  • The IMO Guidelines for Voluntary Use of the Ship Energy Efficiency Operational Indicator (EEOI)
  • The IMO Guidelines on the Method of Calculation of the Attained Energy Efficiency Existing Ship Index (EEXI)
  • The IMO Guidelines on Operational Carbon Intensity Indicators and the Calculation Methods (CII Guidelines, G1)

 

Is there an assessment? 

Yes

Course code: MUK-002
Course type: E-learning course
Duration: 45 minutes
Language: English

Who is this course for?

All personnel who works in a role within the Oil and Gas Industry that may have a direct impact on the environment.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course aims to increase learners’ awareness of the environmental aspects and impacts related to the Oil and Gas Industry and the actions that can be taken to minimise environmental damage.

How will this course benefit my company?

This course will benefit a company by helping personnel become aware of actions that can be taken to reduce environmental damage.

What standards are referred to in this course?

BEIS (formally DECC))

Oil Spill Prevention and Response Advisory Group

Health and Safety Executive (HSE) 

ISO 14001 Environmental Management Systems

Is there an assessment?

Yes


Accreditation:

This course is approved by the Institution of Occupational Safety and Health (IOSH).

IOSH is the world’s Chartered body for safety and health professionals.

 

What that means:

We are the largest membership body for health and safety professionals.

We champion occupational safety and health causes and advocate for change.

We advise governments, NGOs and policymakers.

We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

We commission research and set national and international standards.

We shape the future of the profession.

Course code: MUK-021
Course type: E-learning course
Duration: 30 minutes
Language: English

Who is this course for?

Personnel requiring knowledge or awareness of HAZID.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

 

How will this course benefit me?

This course aims to provide all personnel with solid hazard identification awareness to enable them to evaluate hazards quickly and effectively so that they can carry out their duties as safely as possible. 

 

How will this course benefit my company?

By ensuring you are able to evaluate hazards quickly and effectively so that you can carry out your duties as safely as possible. 

 

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: IMIST-001
Course type: E-learning course
Duration: 135 minutes
Language: English

Who is the course for?

This eLearning course is aimed at individuals who work offshore, in any role, anywhere in the world.

 

Is previous experience required?

 

Learners must possess:

a) A valid OPITO IMIST Initial or valid OPITO IMIST Further training certificate.

Or

b) Have previously worked offshore*
*Learners are required to complete a declaration prior to course commencement confirming prior offshore work experience, including details of their last offshore trip, to include asset name, location and dates.

 

How will the course benefit me?

The offshore working environment is home to many hazards, which means that it is vital for everyone who goes offshore to have the same baseline level of safety knowledge. This course has been created with OPITO to set a global safety standard by applying a consistent level of safety awareness across nine safety critical areas.

The knowledge gained in this course will help you to stay safe in your day to-day activities offshore. It will also outline some of the systems and procedures in place to manage everyday operations offshore.

 

How will the course benefit my company?

By ensuring that your safety knowledge is at or above the baseline level, your company can rest assured that you are able to work offshore safety and in compliance with regulations and company procedures. Increased safety knowledge helps to prevent incidents and makes your working environment a safer place.

 

What standards are referenced in the course?

This course is written based on the OPITO standard International Minimum Industry Safety Further Training Standard (IMIST) (5313). As a global standard, the course is not written to meet any specific regional legislation but references industry best practices and standard operating procedures throughout.

 

Is there an assessment?

The course consists of nine mandatory units, each unit starts with an optional pre-assessment that checks existing knowledge. At the end of the pre-assessment, you will have either completed the unit or you will be presented with the content associated with the identified knowledge gaps. After this content review, an assessment featuring a new set of questions for the outstanding knowledge gaps, will be presented for completion. Each unit has a pass mark of 100% with unlimited attempts to complete. Once a unit is complete, the next unit will be unlocked. Completion of all nine units will generate your IMIST-F OPITO certificate automatically. The certificate is valid for four years, after which you will need to sit the course again to refresh your knowledge and earn a new certificate.

 

Course code: MUK-026
Course type: E-learning course
Duration: 45 minutes
Language: English

Who is this course for?

All personnel across an organisation to set a benchmark of knowledge and awareness of risk assessment.


Is previous experience required?

No previous experience is required to complete this course.


How will this course benefit me?

This course aims to introduce, develop and increase learners’ knowledge and awareness of the importance of Risk Assessment and how it can reduce the likelihood of accidents in the workplace.

How will this course benefit my company?

By ensuring you have the required knowledge and awareness of the importance of Risk Assessment and how it can reduce the likelihood of accidents in the workplace.


What standards are referred to in this course?

No standards or regulations are referenced in this course.


Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.


Accreditation:

This course is approved by the Institution of Occupational Safety and Health (IOSH).

IOSH is the world’s Chartered body for safety and health professionals.

 

What that means:

We are the largest membership body for health and safety professionals.

We champion occupational safety and health causes and advocate for change.

We advise governments, NGOs and policymakers.

We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

We commission research and set national and international standards.

We shape the future of the profession.

Course code: MUK-027
Course type: E-learning course
Duration: 30 minutes
Language: English

Who is the course for?

All personnel who may be exposed to Naturally Occurring Radioactive Material (NORM) in the workplace.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course aims to provide an awareness of NORM and provide best practices for managing NORM in oil and gas producing facilities.

How will the course benefit my company?

The course will benefit companies by ensuring that all members of personnel have an awareness of NORM and how it should be managed, which will help to reduce workplace accidents.

What standards are referenced in the course?

There are no standards or regulations referenced in this course.

Is there an assessment? 

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.


Accreditation:

This course is approved by the Institution of Occupational Safety and Health (IOSH).

IOSH is the world’s Chartered body for safety and health professionals.

 

What that means:

We are the largest membership body for health and safety professionals.

We champion occupational safety and health causes and advocate for change.

We advise governments, NGOs and policymakers.

We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

We commission research and set national and international standards.

We shape the future of the profession.

Course code: MTP-015
Course type: E-learning course
Duration: 15 minutes
Language: English, Norwegian

Who is this course for?

All relevant personnel.

 

Is previous experience required?

No experience is required to complete this course.

 

How will the course benefit me? 

Learners will gain knowledge about ergonomic principles that can help prevent musculoskeletal disorders, reduce the risk of injuries, and promote overall physical well-being.

 

How will the course benefit my company? 

Learners will be able to describe ergonomic principles that will help in creating safer work environments, reducing the risk of workplace injuries.

 

What standards are referenced in the course? 

• The Norwegian Working Environment Act

• The Regulations on Organisation, Management, and Participation

 

Is there an assessment? 

Yes

 

Learning Objectives:

• Explain what ergonomics is and its significance in the workplace

• Identify the correct ergonomic working techniques 

• Explain the importance of the environment in improving ergonomics

• Identify additional measures to improve ergonomics

• Recognise who is responsible for reducing workplace injuries

Course code: MUK-242
Course type: E-learning course
Duration: 45 Minutes
Language: English (US)

Who is this course for?

Personnel at all levels will benefit from this awareness course.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

 

How will this course benefit me?

This course aims to provide an introduction to preventing hand and finger injuries in the workplace.

 

How will this course benefit my company?

By ensuring you have an introduction to preventing hand and finger injuries in the workplace.

 

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MUK-070
Course type: E-learning course
Duration: 30 minutes
Language: English

Who is the course for?

Any personnel who require an awareness of the environmental impacts associated with offshore waste and how these wastes can be managed.

 

Is previous experience required?

You do not require any previous experience to complete this course.

 

How will the course benefit me?

This course will provide you with an understanding of the types of waste generated offshore, how these wastes impact the environment and the methods that can be used to reduce and manage waste.

 

How will the course benefit my company?

Environmentally aware personnel can help to reduce the environmental impacts of your operations and improve environmental performance.

 

What standards are referenced in the course?

• The European Union (EU) Waste Framework Directive

• The International Convention for the Prevention of Pollution from Ships (MARPOL) 1973 - Annex IV

• Merchant Shipping (Prevention of Pollution by Sewage and Garbage from Ships) Regulations

• Deposits in the Sea (Exemption) Order 

• Landfill Directive 

• Environmental Protection (Duty of Care) Regulations

• Special/Hazardous Waste Regulations

• The Special Waste Amendment (Scotland) Regulations 

• Hazardous Waste (England and Wales) Regulations 

• Radioactive Substances Act

• Environmental Permitting (England and Wales) Regulations 

• Waste (England and Wales) Regulations

• Waste (Scotland) Regulations 

• Controlled Waste (England and Wales) Regulations

• Zero Waste (Scotland) Regulations

 

Is there an assessment? 

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MUK-029
Course type: E-learning course
Duration: 20 minutes
Language: English

Who is the course for?

This is course is for those who work with and have an exposure risk to benzene. 

 

Is previous experience required?

No previous experience is required to complete this course. 

 

How will the course benefit me?

This course will benefit learners by providing them with an awareness of benzene and providing best practices for working with benzene in oil and gas producing facilities.

 

How will the course benefit my company?

The course will benefit companies by ensuring that all possible precautions are taken to reduce accidents or injuries resulting from benzene exposure.  

 

What standards are referenced in the course?

Control of Substances Hazardous to Health (COSHH) Regulations

OSHA, the Occupational Safety and Health Administration

 

Is there an assessment?

Yes 

 

Accreditation

This course is approved by the Institution of Occupational Safety and Health (IOSH).

IOSH is the world’s Chartered body for safety and health professionals. 

 

What that means:

We are the largest membership body for health and safety professionals.

We champion occupational safety and health causes and advocate for change.

We advise governments, NGOs and policymakers.

We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

We commission research and set national and international standards.

We shape the future of the profession.

Course code: MUK-007
Course type: E-learning course
Duration: 45 minutes
Language: English

Who is this course for?

Personnel who are involved in work processes that can result in hand-arm vibration exposure.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course will benefit learners’ by making them aware of the risks of hand-arm vibration and the effects that it can cause.

How will this course benefit my company?

This course will benefit companies’ by ensuring that personnel have an understanding of the risks of hand-arm vibration and in turn will reduce the number of injuries that result from this.

What standards are referred to in this course?

Health and Safety Executive (HSE)

Control of Vibration at Work Regulations

Supply of Machinery (Safety) Regulations

Is there an assessment?

Yes


Accreditation:

This course is approved by the Institution of Occupational Safety and Health (IOSH).

IOSH is the world’s Chartered body for safety and health professionals.


What that means:

We are the largest membership body for health and safety professionals.

We champion occupational safety and health causes and advocate for change.

We advise governments, NGOs and policymakers.

We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

We commission research and set national and international standards.

We shape the future of the profession.

 

Course code: MGM-023
Course type: E-learning course
Duration: 50 minutes
Language: English

Who is this course for?
Any members of management, supervisor and shipboard management responsible for ballast water.

Is previous experience required?
You do not need any prior knowledge or experience to complete this course.

How will this course benefit me?
The primary goal of this course are awareness and knowledge of Ballast Water Management in accordance with the International Convention for the Control and Management of Ships' Ballast Water and Sediments, referred to as the BWM Convention.

How will this course benefit my company?
By ensuring you are familiar with the best practices related to Ballast Water Management.


What standards are referred to in this course?
In compliance with IMOs Ballast Water Management Convention (BWMC) 2004 and industry best practice, and complying with US trade and US Coast Guard.

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Course code: TQ_007
Course type: E-learning course
Duration: 15 Minutes
Language: English

Written communications are a necessary part of a manager’s daily work. Whether responding to emails, composing performance reviews for team members, editing an industry report, or crafting a letter to a client, you probably spend a lot of time on writing. For some people, this work comes naturally, but for others, it can be a chore. Becoming a strong writer takes time and practice. But the benefits are worth the effort. As you improve, you’ll be able to structure and “sell” your ideas more easily and your messages will be better received. Let’s look at some fundamental guidelines you can use to make your writing more powerful and effective.

 

• Learn the importance of thinking before writing   

• Write conversationally     

• Use active voice in your sentences

 

Course code: MUK-008
Course type: E-learning course
Duration: 45 minutes
Language: English

Who is the course for?

All personnel who are at risk from slips, trips and falls.

 

Is previous experience required?

No previous experience is required to complete this course.

 

How will the course benefit me?

This course aims to increase learners’ awareness of the risks, and consequences, of slips, trips and falls in the workplace and the control measures and steps that can be taken to reduce the risk of slips, trips and falls, based on industry best practice.

 

How will the course benefit my company?

This course will benefit companies' by reducing slip, trip and fall injuries among personnel.

 

What standards are referenced in the course?

• Health and Safety at Work Act

• Management of Health and Safety at Work Regulations 

• Workplace (Health, Safety and Welfare) Regulations 

• Health and Safety Executive (HSE)

 

Is there an assessment?

Course assessment with a 80% pass mark and two attempts.

 

Accreditation

This course is approved by the Institution of Occupational Safety and Health (IOSH).

 

IOSH is the world’s Chartered body for safety and health professionals. 

 

What that means:

 

• We are the largest membership body for health and safety professionals.

• We champion occupational safety and health causes and advocate for change.

• We advise governments, NGOs and policymakers.

• We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

• We commission research and set national and international standards.

• We shape the future of the profession.

Course code: MUK-073
Course type: E-learning course
Duration: 45 minutes
Language: English

Who is this course for?

Personnel requiring awareness and understanding of common spill events and actions taken to rectify.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

 

How will this course benefit me?

To provide learners with an awareness of the potential environmental impacts associated with spills, and the legislative and control measures in place to avoid these. This course also focuses on spill contingency planning and the spill response measures that should be taken in the event of a spill.

 

How will this course benefit my company?

By ensuring you are aware of the potential environmental impacts associated with spills, and the legislative and control measures in place to avoid these.

 

What standards are referred to in this course?

Merchant Shipping (Oil Pollution Preparedness, Response & Co-operation Convention) Regulations (OPRC)

Offshore Installations (Emergency Pollution Control) Regulations (EPC) 

Offshore Petroleum Activities (Oil Pollution Prevention and Control) Regulations (OPPC) 

Offshore Chemicals Regulations 

Offshore Chemicals (Amendment) Regulations

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MTP-035
Course type: E-learning course
Duration: 70 minutes + Onboar ...
Language: English, Norwegian, Br ...

Who is this course for:
Every seafarer without designated security duties (STCW Table A-VI/6-1)

Is previous experience required?
You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?
Piracy and armed robbery is a real threat to seafarer’s onboard ships and mobile units at sea. 1st January 2014 a requirement about seafarer’s security training was put in force for all ships to which the ISPS Code applies.


The training consists of an e-learning course and the performance of certain on board activities described in a checklist. The client’s approved instructors must sign completed checklists for each trainee.

When the training is completed a certificate is issued by the Norwegian Maritime Authority.

How will this course benefit my company?
By ensuring you have the knowledge and are certified according to the STCW regulations.

What standards are referred to in this course?
STCW - Security Awareness, table A-VI/6-1
This training programme in Ship Security Awareness has been approved by the Norwegian Maritime Authority.

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MUK-118
Course type: E-learning course
Duration: 30 minutes
Language: English

Who is the course for?

All personnel who work in the maritime industry and would benefit from an awareness of the International Ship and Port Facility Security (ISPS) Code.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course aims to provide an overview of the International Ship and Port Facility Security (ISPS) Code.

How will the course benefit my company?

The course will benefit companies by ensuring that all relevant personnel have an understanding of the International Ship and Port Facility Security (ISPS) Code, the security attacks that can occur at sea and how to act in an emergency situation.

What standards are referenced in the course?

International Convention for the Safety of Life at Sea (SOLAS)

The International Ship and Port Facility Security (ISPS) Code

Is there an assessment? 

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

 

Course code: MTP-058
Course type: E-learning course
Duration: 70 minutes + Onboar ...
Language: English, Norwegian

Who is this course for:
Every seafarer with designated security duties (STCW Table A-VI/6-2)

Is previous experience required?
You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?
Piracy and armed robbery is a real threat to seafarer’s onboard ships and mobile units at sea. 1st January 2014 a requirement about seafarer’s security training was put in force for all ships to which the ISPS Code applies.
The training consists of an e-learning course and the performance of certain on board activities described in a checklist. The client’s approved instructors must sign completed checklists for each trainee. When the training is completed a certificate is issued by the Norwegian Maritime Authority.

This course will be a part of a blended learning in two stages:
The first stage is this e-learning course
The second stage will be on board training reflecting the realities on-board the vessel you are serving on. This training might take a couple of weeks or more to complete, as you will be required to participate in a number of drills.

The training will be complete when all the elements of the checklist pertaining to your designated security duties.

Completion of this course requires that you are employed in a company that has a plan in place for on board training for this kind of activities. Contact Mintra for more information about how to complete this training.

The course will not be approved for private individuals.

How will this course benefit my company?
By ensuring you have the knowledge and are certified according to the STCW regulations.

What standards are referred to in this course?
STCW - Security Awareness, table A-VI/6-2
SOLAS - Safety of Life at Sea
MARPOL - Marine Pollution
ISM Code

This training programme in Designated Security Duties is approved by the Norwegian Maritime Authority.

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MTP-033
Course type: E-learning course
Duration: 1 hour
Language: Norwegian, English

Who is the course for?

All people exposed to noise in their daily work.


Is previous experience required?

No previous experience is required.


How will the course benefit me?

The purpose of the course is to prevent noise-induced hearing impairment. You will learn how loud sound and noise affect us. You will also learn how you can properly protect yourself against noise and why that is so important.


How will the course benefit my company?

This course will benefit your company be ensuring that you are familiar with the safety precautions you should take in the workplace to protect your hearing.


What standards are referenced in the course?

The course is based on the current rules and regulations for working in areas where there is a risk of being exposed to noise that may be damaging to health.


Is there an assessment?

Yes

Course code: MTP-061
Course type: E-learning course
Duration: 30 minutes
Language: English, Norwegian

Who is this course for?

This course is suitable for personnel at all levels within an organisation.

 

Is previous experience required?

No previous experience is required to complete this course.

 

How will this course benefit me?

The Code of Conduct course provides an overview of the common values that govern responsible corporate practice and personal behaviour in a company.

 

How will this course benefit my company?

By ensuring awareness of common values that govern responsible corporate practice and personal behaviour in a company.

 

What standards are referred to in this course?

• The US Foreign Corrupt Practices Act (FCPA)

• The UK Bribery Act

• The OECD Convention on Combating Bribery of Foreign Public Officials

• The UN Convention Against Corruption

• The Norwegian Equality and Anti-Discrimination Act

• The EU antitrust law

• The US antitrust law

• The Norwegian Transparency Act

• The International Bill of Human Rights

• The UN Guiding Principles on Business and Human Rights

• The International Labour Organization (ILO) Declaration on Fundamental Principles and Rights at Work

• The UK Modern Slavery Act

• The UK Employment Act

• The UK Equality Act

 

Is there an assessment?

Yes

Course code: MUK-112
Course type: E-learning course
Duration: 180 minutes
Language: English

Who is this course for?

All personnel who work with chemicals in the Oil and Gas Industry.


Is previous experience required?

No previous experience is required to complete this course.


How will this course benefit me?

This course provides learners with an in depth few on the use, management and control of chemicals in the Oil and Gas Industry and how to react in an emergency situation that has resulted from a chemical hazard.


How will this course benefit my company?

The course will benefit companies by ensuring that all personnel have an in depth view of industry best practice for working with chemicals, which will in turn, help keep those working with chemicals safe.


What standards are referred to in this course?

• The Control of Substances Hazardous to Health (COSHH)

• The Offshore Chemicals (Amendment) Regulations

• The Offshore Chemicals Regulations (OCR)

• Offshore Petroleum (Oil Pollution Prevention and Control) Regulations

• Regulation, Evaluation, Authorisation and restriction of Chemicals  (REACH)

• Occupational Safety and Health Administration (OSHA)


Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MUK-019
Course type: E-learning course
Duration: 60 minutes
Language: English

Who is this course for?
Production operators.

Is previous experience required?
No previous experience is required to complete this course.

How will this course benefit me?
This course aims to provide appropriate knowledge of the techniques required for carrying out pressure testing and leak testing in the workplace.

How will this course benefit my company?
By ensuring you have appropriate knowledge of the techniques required for carrying out pressure testing and leak testing in the workplace.

What standards are referred to in this course?
This course does not refer to specific legislation or standards.

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.


Accreditation:

This course is approved by the Institution of Occupational Safety and Health (IOSH).

IOSH is the world’s Chartered body for safety and health professionals.

 

What that means:

We are the largest membership body for health and safety professionals.

We champion occupational safety and health causes and advocate for change.

We advise governments, NGOs and policymakers.

We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

We commission research and set national and international standards.

We shape the future of the profession.

Course code: MUK-099
Course type: E-learning course
Duration: 45 minutes
Language: English

Who is this course for?

This eLearning course is aimed at individuals required to work using display screen equipment, such as a computer, laptop or tablet.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course will give you a basic understanding of the key health risks associated with display screen equipment and what you can do to mitigate them.

How will this course benefit my company?

By ensuring you are fully aware of how to avoid injury while working at your computer, you can help reduce the number of lost workdays and hours due to health issues.

What standards are referred to in this course?

Health and Safety (Display Screen Equipment) Regulations

Is there an assessment?

Yes


Accreditation:

This course is approved by the Institution of Occupational Safety and Health (IOSH).

IOSH is the world’s Chartered body for safety and health professionals.


What that means:

We are the largest membership body for health and safety professionals.

We champion occupational safety and health causes and advocate for change.

We advise governments, NGOs and policymakers.

We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

We commission research and set national and international standards.

We shape the future of the profession.

 

Course code: MUK-137
Course type: E-learning course
Duration: 45 minutes
Language: English, Norwegian

Course goal: This course aims to increase learners’ awareness of the environmental aspects and impacts related to the Oil and Gas Industry and the actions that can be taken to minimise environmental damage.

 

Learning Objectives

LO1 Identify the main environmental issues that affect the Oil and Gas industry

LO2 Explain the importance of being an environmentally responsible company

LO3 Explain the company’s commitment to managing environmental issues

LO4 Explain the role of ISO 14001 in environmental management

LO5 Explain the role of the Regulator

LO6 Define what is meant by environmental ‘aspects’ and ‘impacts’

LO7 Identify the activities that can contribute towards atmospheric pollution 

LO8 Identify the activities that can contribute towards water pollution

LO9 Identify typical spill sources

LO10 Describe the environmental effects of chemical discharges

LO11 Identify the sources and impacts of disturbance of the seabed by the Oil and Gas Industry 

LO12 Identify the sources and impacts of noise from oil and gas operations 

LO13 Identify the activities that can generate waste

LO14 Describe ways in which the impact on the environment can be minimised

LO15 Explain that everyone has a role to play in protecting the environment

Course code: MUK-122
Course type: E-learning course
Duration: 15 minutes
Language: English

Who is this course for?

Personnel requiring an awareness or understanding of common RPE and what they are used for.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

 

How will this course benefit me?

This course aims to give personnel an introduction to different types of respiratory protection and describe its use in the workplace.

 

How will this course benefit my company?

By ensuring you have had an introduction to different types of respiratory protection and describe its use in the workplace.

 

What standards are referred to in this course?

Health and Safety at Work etc. Act 1974

Management of Health and Safteey at Work Regulations 1999

Control of Substances Hazardous to Health Regulations (COSHH) 2002

Control of Asbestos Regualtions 2012

Control of Lead at Work Regulations 2002

Ionising Radiations Regulations 1999

Confined Space Regulations 1997

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MUK-207
Course type: E-learning course
Duration: 30 minutes
Language: English (US)

Who is this course for?

Personnel requiring an awareness or understanding of US CLP and GHS applications.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

 

How will this course benefit me?

This course aims to ensure that relevant personnel in the US have a common and consistent understanding of GHS and CLP.

 

How will this course benefit my company?

By ensuring you have a common and consistent approach to company and industry best practice in relation to US GHS and CLP.

 

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MUK-032
Course type: E-learning course
Duration: 20 minutes
Language: English

Who is the course for?

All personnel who may be exposed to nitrogen in the workplace.

 

Is previous experience required?

No previous experience is required to complete this course. 

 

How will the course benefit me?

This course aims to provide learners with an awareness of nitrogen and provide best practice for work involving nitrogen in oil and gas producing facilities.

 

How will the course benefit my company?

The course will benefit companies by ensuring that all relevant personnel understand the best practice when working with nitrogen in oil and gas producing facilities.

 

What standards are referenced in the course?

Control of Substances Hazardous to Health (COSHH) Regulations 

Health and Safety Executive (Health and Safety Executive (HSE)

The Occupational Safety and Health Administration (OSHA)

 

Is there an assessment?

Yes

 

Accreditation:

This course is approved by the Institution of Occupational Safety and Health (IOSH).

IOSH is the world’s Chartered body for safety and health professionals.

 

What that means:

We are the largest membership body for health and safety professionals.

We champion occupational safety and health causes and advocate for change.

We advise governments, NGOs and policymakers.

We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

We commission research and set national and international standards.

We shape the future of the profession.

Course code: MUK-199
Course type: E-learning course
Duration: 30 minutes
Language: English

Who is this course for?
All relevant personnel.

Is previous experience required?
You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?
This course aims to provide you with an awareness of bloodborne pathogens, common modes of transmission, methods of prevention, and what to do if exposure occurs.

How will this course benefit my company?
By ensuring you are aware of the bloodborne pathogens, common modes of transmission, methods of prevention, and what to do if exposure occurs.

What standards are referred to in this course?
N/A

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MUK-074
Course type: E-learning course
Duration: 30 minutes
Language: English

Who is this course for?

All personnel who work in the Oil & Gas industry in roles that are involved in oily discharges to sea.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

To provide learners with an awareness of the potential environmental impacts associated with oily discharges to sea, as well as the legislation and control measures that are in place to minimise these impacts.

How will this course benefit my company?

The course will benefit companies by ensuring that all relevant personnel are aware of ways to safely remove oily discharges which will help to take care of the environment.

What standards are referred to in this course?

• Offshore Petroleum Activities (Oil Pollution Prevention and Control) OPPC Regulations 2005

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MTP-062
Course type: E-learning course
Duration: 30 minutes
Language: English, Norwegian

Who is this course for?

Personnel at all levels within an organisation to establish a common benchmark of awareness.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

 

How will this course benefit me?

This course provides an overview of common corporate sustainability approaches and identifies the social, environmental and corporate governance aspects that should be considered during business operations. The course also identifies the human rights that are at risk of infringement in the work environment, and you will be aware of the global presence of modern-day slavery. During the course, you will be asked to make your own decisions in relevant dilemmas involving environmental criminality, corruption and breaches of labour rights.

 

How will this course benefit my company?

By ensuring you are aware of the common corporate sustainability approaches and identifies the social, environmental and corporate governance aspects that should be considered during business operations.

 

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MTP-036
Course type: E-learning course
Duration: 45 minutes
Language: English, Norwegian

Who is this course for?

This Working in Cold Environments course is for personnel who require an introduction to or awareness of working in cold climates.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

 

How will this course benefit me?

Working in cold environments can be a significant challenge for comfort and the ability to perform work tasks in a safe and efficient manner. 

 

How will this course benefit my company?

By ensuring you have are aware of the challenges to perform work tasks in cold environments. 

 

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

 

Hits per page