Oil and Gas

Course catalogue

hits
448
Course code: MUK-008
Course type: E-learning course
Duration: 30 minutes
Language: English

Who is the course for?

All personnel who are at risk from slips, trips and falls.

 

Is previous experience required?

No previous experience is required to complete this course.

 

How will the course benefit me?

This course aims to increase learners’ awareness of the risks, and consequences, of slips, trips and falls in the workplace and the control measures and steps that can be taken to reduce the risk of slips, trips and falls, based on industry best practice.

 

How will the course benefit my company?

This course will benefit companies' by reducing slip, trip and fall injuries among personnel.

 

What standards are referenced in the course?

• Health and Safety at Work Act

• Management of Health and Safety at Work Regulations 

• Workplace (Health, Safety and Welfare) Regulations 

• Health and Safety Executive (HSE)

 

Is there an assessment?

Course assessment with a 80% pass mark and two attempts.

 

Accreditation

This course is approved by the Institution of Occupational Safety and Health (IOSH).

 

IOSH is the world’s Chartered body for safety and health professionals. 

 

What that means:

 

• We are the largest membership body for health and safety professionals.

• We champion occupational safety and health causes and advocate for change.

• We advise governments, NGOs and policymakers.

• We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

• We commission research and set national and international standards.

• We shape the future of the profession.

Course code: MUK-017
Course type: E-learning course
Duration: 275 minutes
Language: English

Who is the course for?

Personnel responsible for conducting atmospheric testing at the worksite.

 

Is previous experience required?

No previous experience is required.

 

How will the course benefit me?

This course aims to provide the knowledge and techniques for carrying out gas  testing.

 

How will the course benefit my company?

By ensuring that personnel are aware of the situations and circumstances in   which a hazardous atmosphere could occur and the steps that should be taken   in an emergency.

 

What standards are referenced in the course?

Health and Safety at Work Act

CoSHH

PFEER

Management of Health and Safety at Work Regulations

EH40 Workplace Exposure Limits (WELs)

Confined Space Regulations

 

Is there an assessment? 

Yes

Course code: MUK-012
Course type: E-learning course
Duration: 20 minutes
Language: English

Who is the course for?

This course is aimed at all personnel involved in lifting operations in the Oil and Gas Industry.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course provides learners with an awareness of the Lifting Operations and Lifting Equipment Regulations (LOLER) and gives an overview of industry best practice in relation to working with lifting equipment.

How will the course benefit my company?

This course will provide personnel with an overview of rigging and lifting operations.

What standards are referenced in the course?

• Lifting Operations and Lifting Equipment Regulations (LOLER) 

• Health and Safety at Work Act 

• Management of Health and Safety at Work Regulations 

• Provision and Use of Work Equipment Regulations (PUWER)

 

Is there an assessment?

Yes

 

Accreditation

This course is approved by the Institution of Occupational Safety and Health (IOSH).

IOSH is the world’s Chartered body for safety and health professionals.

 

What that means:

We are the largest membership body for health and safety professionals.

We champion occupational safety and health causes and advocate for change.

We advise governments, NGOs and policymakers.

We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

We commission research and set national and international standards.

We shape the future of the profession.

Course code: MUK-015
Course type: E-learning course
Duration: 30 minutes
Language: English

Who is this course for?

All personnel within the Oil and Gas Industry.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course aims to increase learners’ awareness of the importance of Personal Protective Equipment (PPE), and outline the legal duties and responsibilities of employers and employees in relation to PPE.

How will this course benefit my company?

The course will benefit companies by reducing PPE related incidents and injuries. 

What standards are referred to in this course?

Control of Lead at Work Regulations 

Ionising Radiations Regulations 

Control of Asbestos at Work Regulations 

Control of Substances Hazardous to Health Regulations 

Control of Noise at Work Regulations

Personal Protective Equipment at Work Regulations

Is there an assessment?

Yes.


Accreditation:

This course is approved by the Institution of Occupational Safety and Health (IOSH). 

IOSH is the world’s Chartered body for safety and health professionals.

What that means:

We are the largest membership body for health and safety professionals.

We champion occupational safety and health causes and advocate for change.

We advise governments, NGOs and policymakers.

We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

We commission research and set national and international standards.

We shape the future of the profession.

Course code: MUK-027
Course type: E-learning course
Duration: 30 minutes
Language: English

Who is the course for?

All personnel who may be exposed to Naturally Occurring Radioactive Material (NORM) in the workplace.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course aims to provide an awareness of NORM and provide best practices for managing NORM in oil and gas producing facilities.

How will the course benefit my company?

The course will benefit companies by ensuring that all members of personnel have an awareness of NORM and how it should be managed, which will help to reduce workplace accidents.

What standards are referenced in the course?

There are no standards or regulations referenced in this course.

Is there an assessment? 

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.


Accreditation:

This course is approved by the Institution of Occupational Safety and Health (IOSH).

IOSH is the world’s Chartered body for safety and health professionals.

 

What that means:

We are the largest membership body for health and safety professionals.

We champion occupational safety and health causes and advocate for change.

We advise governments, NGOs and policymakers.

We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

We commission research and set national and international standards.

We shape the future of the profession.

Course code: MUK-026
Course type: E-learning course
Duration: 45 minutes
Language: English

Who is this course for?

All personnel across an organisation to set a benchmark of knowledge and awareness of risk assessment.


Is previous experience required?

No previous experience is required to complete this course.


How will this course benefit me?

This course aims to introduce, develop and increase learners’ knowledge and awareness of the importance of Risk Assessment and how it can reduce the likelihood of accidents in the workplace.

How will this course benefit my company?

By ensuring you have the required knowledge and awareness of the importance of Risk Assessment and how it can reduce the likelihood of accidents in the workplace.


What standards are referred to in this course?

No standards or regulations are referenced in this course.


Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.


Accreditation:

This course is approved by the Institution of Occupational Safety and Health (IOSH).

IOSH is the world’s Chartered body for safety and health professionals.

 

What that means:

We are the largest membership body for health and safety professionals.

We champion occupational safety and health causes and advocate for change.

We advise governments, NGOs and policymakers.

We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

We commission research and set national and international standards.

We shape the future of the profession.

Course code: MUK-002
Course type: E-learning course
Duration: 45 minutes
Language: English

Who is this course for?

All personnel who works in a role within the Oil and Gas Industry that may have a direct impact on the environment.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course aims to increase learners’ awareness of the environmental aspects and impacts related to the Oil and Gas Industry and the actions that can be taken to minimise environmental damage.

How will this course benefit my company?

This course will benefit a company by helping personnel become aware of actions that can be taken to reduce environmental damage.

What standards are referred to in this course?

BEIS (formally DECC))

Oil Spill Prevention and Response Advisory Group

Health and Safety Executive (HSE) 

ISO 14001 Environmental Management Systems

Is there an assessment?

Yes


Accreditation:

This course is approved by the Institution of Occupational Safety and Health (IOSH).

IOSH is the world’s Chartered body for safety and health professionals.

 

What that means:

We are the largest membership body for health and safety professionals.

We champion occupational safety and health causes and advocate for change.

We advise governments, NGOs and policymakers.

We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

We commission research and set national and international standards.

We shape the future of the profession.

Course code: IMIST-001
Course type: E-learning course
Duration: 135 minutes
Language: English

Who is the course for?

This eLearning course is aimed at individuals who work offshore, in any role, anywhere in the world.

 


Is previous experience required?

 


Learners must possess:

a) A valid OPITO IMIST Initial or valid OPITO IMIST Further training certificate.

Or

b) Have previously worked offshore*
*Learners are required to complete a declaration prior to course commencement confirming prior offshore work experience, including details of their last offshore trip, to include asset name, location and dates.

 


How will the course benefit me?

This course has been created with OPITO to set a global safety standard by applying a consistent level of safety awareness across nine safety critical areas.

The knowledge gained in this course will help you to stay safe in your day to-day activities offshore. It will also outline some of the systems and procedures in place to manage everyday operations offshore.

 


How will the course benefit my company?

By ensuring that your safety knowledge is at or above the baseline level, your company can rest assured that you are able to work offshore safety and in compliance with regulations and company procedures.

 

What standards are referenced in the course?

This course is aligned with OPITO's International Minimum Industry Safety Training (IMIST) Further Standard (5313). As a global standard, the course is not written to meet any specific regional legislation but references industry best practices and standard operating procedures throughout.

 


Is there an assessment?

The course consists of nine mandatory units, each unit starts with an optional pre-assessment that checks existing knowledge. At the end of the pre-assessment, you will have either completed the unit or you will be presented with the content associated with the identified knowledge gaps. After this content review, an assessment featuring a new set of questions for the outstanding knowledge gaps, will be presented for completion. Each unit has a pass mark of 100% with unlimited attempts to complete. Once a unit is complete, the next unit will be unlocked. Completion of all nine units will generate your IMIST-F OPITO certificate automatically. The certificate is valid for four years, after which you will need to sit the course again to refresh your knowledge and earn a new certificate.


Please find pre-course information and learning outcomes here: 
https://mintra.com/implementing-maintaining-opito-standards-policy

 

Course code: MUK-021
Course type: E-learning course
Duration: 30 minutes
Language: English

Who is this course for?

Personnel requiring knowledge or awareness of HAZID.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

 

How will this course benefit me?

This course aims to provide all personnel with solid hazard identification awareness to enable them to evaluate hazards quickly and effectively so that they can carry out their duties as safely as possible. 

 

How will this course benefit my company?

By ensuring you are able to evaluate hazards quickly and effectively so that you can carry out your duties as safely as possible. 

 

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MUK-242
Course type: E-learning course
Duration: 45 minutes
Language: English

Who is this course for?

Personnel at all levels will benefit from this awareness course.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

 

How will this course benefit me?

This course aims to provide an introduction to preventing hand and finger injuries in the workplace.

 

How will this course benefit my company?

By ensuring you have an introduction to preventing hand and finger injuries in the workplace.

 

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Hits per page
| 3 ... |