Course catalogue

Who is this course for:
All employees working in ISPS-areas.

Is previous experience required?
You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?
Basic knowledge of ISPS rules and regulations applicable to international ports and harbours. The course objective is to raise awareness of possible threats to international ports and harbours. Completed course normally gives access to ISPS-areas on harbours.

How will this course benefit my company?
By ensuring you have the knowledge related to ISPS rules and regulatins applicable to international ports and harbours.

What standards are referred to in this course?
ISPS code

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Personnel requiring an awareness and understanding of common practices and legislation for chemical use and discharges.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

To provide learners with an awareness of the environmental impacts associated with the use and discharge of chemicals in the Oil and Gas Industry and the legislation and control measures that are in place to minimise the impact on the environment.

How will this course benefit my company?

By ensuring you are aware of the environmental  impacts associated with the use and discharge of chemicals in the Oil and Gas Industry and the legislation and control measures that are in place to minimise the impact on the environment.

What standards are referred to in this course?

Offshore Chemical Regulations 2002

Offshore Chemicals (Amendment) Regulations 2011

Offshore Petroleum (Oil Pollution Prevention and Control) Regulations

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

All personnel within the Oil and Gas Industry.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course aims to increase learners’ awareness of the importance of Personal Protective Equipment (PPE), and outline the legal duties and responsibilities of employers and employees in relation to PPE.

How will this course benefit my company?

The course will benefit companies by reducing PPE related incidents and injuries. 

What standards are referred to in this course?

Control of Lead at Work Regulations 

Ionising Radiations Regulations 

Control of Asbestos at Work Regulations 

Control of Substances Hazardous to Health Regulations 

Control of Noise at Work Regulations

Personal Protective Equipment at Work Regulations

Is there an assessment?

Yes.

Accreditation:

This course is approved by the Institution of Occupational Safety and Health (IOSH). 

IOSH is the world’s Chartered body for safety and health professionals.

What that means:

We are the largest membership body for health and safety professionals.

We champion occupational safety and health causes and advocate for change.

We advise governments, NGOs and policymakers.

We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

We commission research and set national and international standards.

We shape the future of the profession.

Who is this course for?

Ship Officers

Is previous experience required?

Documented 12 months seaservice as an officer onboard an ISPS vessel. 

How will this course benefit me?

After successfully completing this course, you should be able to undertake the duties and responsibilities of a Ship Security Officer, as defined in section A/12.2 of the ISPS Code and in section A-VI/5 of the STCW Code. The course enables you to maintain and supervise the implementation of the Ship Security Plan, evaluate the security risk, threat and vulnerability, make regular inspections to ensure that appropriate safeguards are implemented and maintained, and ensure that the security systems are operated, tested and calibrated correctly.

How will this course benefit my company?

By ensuring you are qualified and certified as a Ship Security Officer (SSO).

What standards are referred to in this course?

STCW A-VI/5 and ISPS code section A/12.2.

The course is approved by the Norwegian maritime Authority. Approved certificate as Ship Security Officer will be issued upon course completion.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%. 

This course is a combined training consisting of: Elearning and onboard training (exercises and checklists).

To complete the course, it is required that you are employed by a company which has a plan for onboard training with these kind of activities.

The course will not be approved for any persons without a connection to a company as described above.

Who is the course for?

All personnel who work with machinery, tools and appliances.

Is previous experience required?

No previous experience is required to complete this course. 

How will the course benefit me?

This course aims to provide learners with an awareness of the requirements of the Provision and Use of Work Equipment Regulations (PUWER) and how they apply in the workplace.

How will the course benefit my company?

This course will benefit companies’ by providing personnel with an awareness of PUWER. 

What standards are referenced in the course?

Provision and Use of Work Equipment Regulations (PUWER)

Health and Safety at Work Act

Management of Health and Safety at Work Regulations

Is there an assessment?

Yes

Accreditation

This course is approved by the Institution of Occupational Safety and Health (IOSH).

IOSH is the world’s Chartered body for safety and health professionals.

What that means:

• We are the largest membership body for health and safety professionals.

• We champion occupational safety and health causes and advocate for change.

• We advise governments, NGOs and policymakers.

• We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

• We commission research and set national and international standards.

• We shape the future of the profession.

Who is this course for?
All relevant personnel.

Is previous experience required?
You do not need prior knowledge or experience to complete this course.

How will this course benefit me?
This course provides drug and alcohol awareness, information on company policies, and the effects of alcohol abuse, illegal drug use, and the abuse of prescription drugs.

How will this course benefit my company?
By ensuring you have a basic understanding of the drug and alcohol awareness, information on company policies, and the effects of alcohol abuse, illegal drug use, and the abuse of prescription drugs.

What standards are referred to in this course?
N/A

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is this course for?
All personnel who are at risk for being exposed to benzene.

Is previous experience required?
You do not need prior knowledge or experience to complete this course.

How will this course benefit me?
This course aims to provide learners with an awareness of benzene and provide best practice for work with benzene in oil and gas producing facilities.

How will this course benefit my company?
By ensuring you are aware of the impacts of benzene and familiar with best practice for work with benzene.

What standards are referred to in this course?
Norwegian Oil&Gas circulars NOG 130, 131&133
SOLAS - II/2/16.3.2
IMO circulars 1095 and 1220

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course goal: This course aims to ensure that all members of the global Oil and Gas workforce have a consistent and common understanding of, and approach to, Control of Work.

Who is the course for?

All relevant personnel

Is there an assessment? 

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Sections:

Section 1: Introduction to Control of work

Section 2: Hazard Identification and Risk Assessment

Section 3: Controlling Work Activities

Section 4: Handover, Work Suspension and Completion

Who is this course for?
This course is aimed at all personnel involved in mechanical isolations.

Is previous experience required?
No previous experience is required to complete this course.

How will this course benefit me?
This course aims to provide all relevant personnel with an overview of best practices in mechanical isolations.

How will this course benefit my company?

The course will benefit companies by ensuring that all relevant personnel have an understanding of mechanical isolation best practices, which will reduce accidents and injuries at work.

What standards are referred to in this course?
The United Kingdom’s UK’s Health and Safety Executive’s Regulation 253 ‘The safe isolation of plant and equipment’.

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Any personnel who require knowledge of Legionella bacteria.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

By providing personnel with an overview of the steps that can be taken to reduce the risks posed by Legionella in the workplace.

How will this course benefit my company?

By providing personnel with an overview of how to identify the risks associated with Legionella and the control measures that can be implemented to reduce those risks.

What standards are referred to in this course?

This course does not refer to specific legislation or standards.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Accreditation:

This course is approved by the Institution of Occupational Safety and Health (IOSH).

IOSH is the world’s Chartered body for safety and health professionals.

What that means:

We are the largest membership body for health and safety professionals.

We champion occupational safety and health causes and advocate for change.

We advise governments, NGOs and policymakers.

We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

We commission research and set national and international standards.

We shape the future of the profession.

Who is the course for?

Personnel working in industries which release pollutants into the air as a result of their operations.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

By providing you with an awareness of the environmental issues associated with atmospheric emissions and how these impacts can be minimised.

How will the course benefit my company?

Personnel who are aware of the impacts of environmental emissions and how they can be controlled can help to ensure compliance with regulations and reduce harm to the environment.

What standards are referenced in the course?

Climate Change Act

The International Convention for the Prevention of Pollution from Ships (MARPOL) Annex VI

Merchant Shipping (Prevention of Air Pollution from Ships) Regulations

Offshore Combustion Installations (Pollution Prevention and Control) Regulations (PPC Regulations)

Petroleum Act

Greenhouse Gas Emissions Trading Scheme

Ozone-depleting Substances Regulations

Fluorinated Greenhouse Gases Regulations

Energy Savings Opportunity Scheme (ESOS) Regulations

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?
This course is aimed at personnel who routinely process personal data, such as IT or HR staff.

Is previous experience required?
You do not need prior knowledge or experience to complete this course. 

How will this course benefit me?
Complying with the GDPR is mandatory for organisations processing personal data in the EU or EEA and for organisations processing the personal data of EU and EEA residents from abroad. This course introduces the principles and rights enshrined in the GDPR and the obligations organisations have to comply with it.  

How will this course benefit my company?
It will ensure you have an awareness of how you and your organisation must comply with the GDPR.

What standards are referred to in this course?
The EU General Data Protection Regulation (GDPR)

Is there an assessment?
Exam in TP with 80% pass mark with two attempts.

The course covers the following topics:

- What is psychosocial working environment?
- Characteristics of good and poor psychosocial environment
- Roles and responsibilities
- Prevention

At the beginning of the course you can take a pre-test, where you get the opportunity to show your skills. If you pass the pre-test, you do not have to go through the entire course.

Who is this course for?

Personnel involved in the design, construction and maintenance of small bore tubing systems.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to introduce, develop and increase learners’ knowledge and awareness of industry best practice for working on small bore tubing systems.

How will this course benefit my company?

By ensuring you have the required knowledge and awareness of the design, construction and maintenance of small bore tubing systems.

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed each section, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the section and have a pass mark of 80%. Each section must be completed and passed in turn.

This course aims to provide learners with an overview of industry best practice in relation to confined space entry work.

Learning Objectives

- LO1 Explain what is meant by a Confined Space
- LO2 Give examples of Confined Spaces
- LO3 Describe the dangers that can be caused by confined space entry work
- LO4 Identify the legal requirements associated with confined space entry work
- LO5 Explain how to avoid entering confined spaces
- LO6 Explain the importance of having a Safe System of Work in place
- LO7 Describe individual roles and responsibilities involved in Confined Space Entry work
- LO8 Explain the requirements for gas testing
- LO9 Identify acceptable levels for atmospheric test results
- LO10 Give examples of Confined Space Entry site safety equipment
- LO11 Explain the actions to take in an emergency situation
- LO12 Explain Confined Space Entry alarm procedures

Who is this course for?

Personnel responsible for cooking, preparing or handing food and others working in the kitchen/galley/dining areas.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course will provide you with an introduction to industry best practice in relation to food safety, health and hygiene.

How will this course benefit my company?

This course will provide personnel with an introduction to industry best practice in relation food safety, health and hygiene and help reinforce the importance of good food safety practices in the workplace.

What standards are referred to in this course?

This course does not refer to specific legislation or standards.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Personnel throughout an organisation which operates within major accident hazard sectors.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide learners with an introduction to major accident hazards.

How will this course benefit my company?

By ensuring you have had an introduction to major accident hazards.

What standards are referred to in this course?

The Offshore Installations (Safety Case) Regulations

The Offshore Installation and Pipeline Works (Management and Administration) Regulations (MAR)

The Offshore Installations (Prevention of Fire andf Explosion and Emergency Response) Regulations (PFEER)

The Offshore Installations and Wells (Design and Contruction) Regulations (DCR)

The Control of Major Accident Hazards Regulations (COMAH)

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

All relevant personnel.

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?

This course aims to provide personnel with an overview of their right to access their individual exposure and medical records held by their employer in accordance with the OSHA Standard - Access to Employee Exposure and Medical Records 29 CFR 1910.1020.

How will this course benefit my company?

By ensuring you are aware of the right to access the individual exposure and medical records held by the employer in accordance with the OSHA Standard - Access to Employee Exposure and Medical Records 29 CFR 1910.1020.

What standards are referred to in this course?

N/A

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Supervisors and employees who require an overview of Behavioural Observation Safety Systems.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course will provide you with an introduction to behavioural observation safety systems.

How will this course benefit my company?

Behavioural observation safety systems aim to improve workplace safety by focussing on what personnel do, and why they do it, and then applying strategies that promote safe behaviours in the future.

What standards are referred to in this course?

This course does not refer to specific legislation or standards.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Este curso está diseñado para permitirle:

• Definir qué se entiende por "caída de objetos".

• Identificar cuáles son las causas comunes de la caída de objetos y sus consecuencias y explicar la importancia de eliminar o reducir el riesgo de que ocurran incidents.

• Identificar las obligaciones de los empleadores y los empleados para eliminar los incidentes de caída de objetos.

• Identificar las áreas que presentan un alto potencial de lesiones al personal en caso de ocurrir un incidente de caída de objetos.

• Identificar ejemplos de malas prácticas.

• Describir las medidas que se deben adoptar para controlar el riesgo de caída de objetos

Who is this course for:
Maritime personnel, onshore and offshore.

Is previous experience required?
You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role.

How will this course benefit me?
The course looks at the purpose of the ISM Code, which is to maintain safety in international shipping, reduce pollution from vessels, protect the exterior environment and prevent injury or loss of human life.

How will this course benefit my company?

By ensuring you have the knowledge of the purpose of the ISM Code.

What standards are referred to in this course?

The International Convention for the Safety of Life at Sea (SOLAS)

The International Ship and Port Facility Security (ISPS) Code 

The International Convention on Standards of Training, Certification and Watchkeeping for Seafarers (STCW)

The International Safety Management (ISM) Code 

The International Convention for the Prevention of Pollution from Ships (MARPOL)

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

All relevant personnel.

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?

This course aims to provide personnel with an overview of the requirements and operation of a typical permit to work system

How will this course benefit my company?

By ensuring you have an overview of the requirements and operation of a typical permit to work system

What standards are referred to in this course?

The Health and Safety at Work Act of 1974

HSG 250

The Offshore Installations (Safety Case) Regulations

The Management of Health and Safety at Work Regulations 1999

The Offshore Installations and Pipeline Works (Management and Administration) Regulations 1995

The Control of Substances Hazardous to Health Regulations (COSHH) 2002

The Freedom of Information Act

The Data Protection Act 1998

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is the course for?

All personnel working within the Oil and Gas Industry (onshore and offshore).

Is previous experience required?

You do not require previous experience to complete this course.

How will the course benefit me?

This course will provide you a basic understanding the ways in which industrial operations can impact the environment and the steps that we can all take to minimise these impacts.

How will the course benefit my company?

Environmentally aware personnel can help to reduce the environmental impacts of your operations and improve environmental performance.

What standards are referenced in the course?

ISO 14001 Environmental Management Systems

Offshore Chemical Regulations

Integrated Pollution Prevention and Control (IPPC) Directive

Control of Major Accident Hazards (COMAH) Regulations

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

This course is aimed towards all personnel who use abrasive wheels in the workplace.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course aims to provide all relevant personnel with the knowledge required to understand the hazards and controls associated with the use of abrasive wheels.

How will this course benefit my company?

The course will benefit companies by providing personnel with knowledge of how to avoid risks and hazards when using abrasive wheels, subsequently reducing accidents and injuries in the workplace.

What standards are referred to in this course? 

• Provision and Use of Work Equipment Regulations (PUWER) 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is the course for?

Personnel who are involved in the preparation of dangerous goods for transportation by sea.

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role.

How will the course benefit me?

This course aims to provide learners with industry best practice in relation to the transportation of dangerous goods by sea.

This course has been developed in accordance with the general awareness/familiarisation training requirements described in the IMDG Code (Chapter 1.3).

How will the course benefit my company?

By ensuring you are familiar with industry best practice in relation to the transportation of dangerous goods by sea.

What standards are referenced in the course?

• International Convention for the Safety of Life at Sea (SOLAS)

• International Maritime Dangerous Goods (IMDG) Code

• Title 49 of the Code of Federal Regulations (49 CFR)

• International Convention on Standards of Training, Certification and Watchkeeping for Seafarers (STCW)

• IMO Model Course 1.10 ‘Dangerous, Hazardous and Harmful Cargoes’

Is there an assessment?

Once you have completed each section of the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the section and have a pass mark of 70%.

Course Goal: This course aims to provide an introduction to corrosion in the Oil and Gas Industry

Target Audience: All relevant personnel

Learning Objectives

LO1 Define what is meant by corrosion and explain why it poses a risk to the Oil and Gas Industry

LO2 Identify areas where corrosion is commonly found in oil and gas facilities

LO3 Identify the elements which are necessary for corrosion to occur

LO4 Identify the main corrodents found in oil and gas facilities and explain how these can cause corrosion

LO5 Identify different types of corrosion

LO6 Explain how corrosion can impact wells and flowlines

LO7 Explain how corrosion can impact plant and pipelines

LO8 Explain how corrosion can impact gas systems

LO9 Explain how corrosion can impact water systems

LO10 Explain how corrosion can impact deadleg areas

LO11 Identify areas where external corrosion is most prevalent

LO12 Describe corrosion control measures

LO13 Explain how to play your part in minimising corrosion

Who is the course for?

This course is aimed at individuals who work in industries or workplaces where mercury may be present.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course provides learners with an awareness of the hazards involved in working with and around mercury.

How will the course benefit my company?

The course will benefit companies by ensuring that all necessary precautions are taken to reduce accidents or injuries resulting from working with or around mercury.

What standards are referenced in the course?

Control of Substances Hazardous to Health Regulations (COSHH)

The Environmental Protection Agency’s (EPA)

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Accreditation:

This course is approved by the Institution of Occupational Safety and Health (IOSH).

IOSH is the world’s Chartered body for safety and health professionals.

What that means:

We are the largest membership body for health and safety professionals.

We champion occupational safety and health causes and advocate for change.

We advise governments, NGOs and policymakers.

We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

We commission research and set national and international standards.

We shape the future of the profession.

Who is this course for?

Personnel requiring awareness and understanding of security within operations.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide an overview of personal security risks, information security risks and site security risks and their associated risk reduction methods

How will this course benefit my company?

By ensuring you have an overview of personal security risks, information security risks and site security risks and their associated risk reduction methods

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Personnel requiring an awareness and understanding of risk management.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course is designed to enable all personnel to have a common and consistent approach to industry best practice in relation to risk management.

How will this course benefit my company?

By ensuring you have a common and consistent approach to industry best practice in relation to risk management.

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

All personnel working with electricity in the Oil and Gas Industry.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course aims to provide all relevant personnel with a broad overview of common Electrical Safety Rules, and outlines best practice when working with electricity.

How will this course benefit my company?

By ensuring you have the knowledge of common Electrical Safety Rules, and the best practice when working with electricity, to reduce risk and injury at work.

What standards are referred to in this course?

• Health and Safety at Work Act

• Electricity at Work Regulations

• Management of Health and Safety at Work Regulations

• Electricity at Work Safe Working Practices

• Offshore Electricity and Noise Regulations

• Provision and Use of Work Equipment Regulations

• BS 7671: 2018 Requirements for Electrical Installations

• Offshore Installations (Safety Case) Regulations

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course goal: This course aims to increase learners’ awareness of the importance of Personal Protective Equipment (PPE), and outline the legal duties and responsibilities of employers and employees in relation to PPE.

Learning Objectives

LO1 Define what is meant by Personal Protective Equipment (PPE)

LO2 Identify the different types of PPE 

LO3 Identify typical regulatory requirements associated with PPE

LO4 Describe the Hierarchy of Control measures and the use of PPE in relation to this

LO5 Explain the requirement for assessing the suitability and compatibility of PPE

LO6 Explain the maintenance requirements for PPE

LO7 Describe the duties and responsibilities of employees in relation to PPE

LO8 Explain the importance of PPE-related training, information and instruction

Who is this course for?

This eLearning course is aimed at individuals who are required to work with wells in the oil and gas industry.

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role.

How will this course benefit me?

This course aims to provide learners with an overview of well integrity and its importance in maintaining safe and secure operations.

This course contains the following sections:

Section 1: Well Integrity Overview

Section 2: Well Categorisation and Well Barriers

Section 3: Well Design and the Cementing Process

Section 4: Human Factors in Well Integrity

How will this course benefit my company?

To ensure you have an overview of well integrity and its importance in maintaining safe and secure operations.

What standards are referred to in this course?

This course is made according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?
This course is aimed at personnel from all sectors of the Oil and Gas Industry – government agencies, authorities, operators, contractors and service companies. It is especially valuable for newcomers to the industry and non-technical personnel working in areas like HR, finance, IT, contracts and administration who feel they could benefit from gaining a wider appreciation of the ‘bigger picture’.

Is previous experience required?
You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?
This course aims to provide an introduction to each key phase of the exploration and production industry.

How will this course benefit my company?
By ensuring you are aware of each key phase of the exploration and production industry.

What standards are referred to in this course?
OSPAR Convention

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course goal: This course aims to introduce, develop and increase learners’ knowledge and awareness of the importance of Risk Assessment and how it can reduce the likelihood of accidents in the workplace. 

Learning Objectives

LO1  Explain the principles of, and steps involved in, the Risk Assessment process

LO2  Explain that employers have a responsibility for completing Risk Assessments and that employees have a duty to follow Risk Assessment outcomes 

LO3  Identify a typical Risk Assessment form    

LO4  Explain the requirements of the Risk Assessment team 

LO5  Recognise and explain Risk Assessment terminology

LO6  Identify the different steps within the Risk Assessment process 

LO7  Identify common, industry-specific hazards

LO8  Determine the appropriate level of Risk Assessment that may be required

LO9  Explain how to use a Risk Matrix to evaluate the level of risk

LO10  Explain how to identify appropriate control measures based on the Hierarchy of Control

LO11  Explain what is meant by ‘Initial Risk’ and ‘Residual Risk’

LO12  Describe what to do if any Residual Risk remains too high

LO13  Explain how to carry out a Personal Risk Assessment and recognise its importance before each task 

LO14  Explain the importance of Dynamic Risk Assessment  

LO15  Identify situations where ‘Stopping the Job’ may apply

LO16  Explain the importance of communicating the outcomes of a Risk Assessment  

LO17  Understand the importance of communicating ‘Lessons Learned’

Who is this course for?

Personnel who work with pressurised cylinders, compressed gas or associated equipment.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course aims to provide an overview of the use of pressurised cylinders, the risks involved and storage requirements.

How will this course benefit my company?

By ensuring you have an overview of the use of pressurised cylinders, the risks involved and storage requirements.

What standards are referred to in this course?

This course does not refer to specific legislation or standards.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Accreditation:

This course is approved by the Institution of Occupational Safety and Health (IOSH).

IOSH is the world’s Chartered body for safety and health professionals.

What that means:

We are the largest membership body for health and safety professionals.

We champion occupational safety and health causes and advocate for change.

We advise governments, NGOs and policymakers.

We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

We commission research and set national and international standards.

We shape the future of the profession.

Who is this course for?
Trainee Oil and Gas Operations Technicians / Deck Crew

Is previous experience required?
You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?
This course aims to provide an introduction to the use of storage tanks

How will this course benefit my company?
By ensuring you are introducted to the use of storage tanks

What standards are referred to in this course?
N/A

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

All personnel involved in marine operations.

Is previous experience required?

No experience is required to take this course.

How will this course benefit me?

By ensuring you know how to respond to marine trash and debris incidents.

How will this course benefit my company?

By ensuring you know how to respond to marine trash and debris incidents.

What standards are referred to in this course?

US best practise.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Personnel requiring an awareness or understanding of US best practice for protecting hearing from noise hazards.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to ensure that relevant personnel in the US have a common and consistent understanding of noise hazards and their effects on you.

How will this course benefit my company?

By ensuring you have a common and consistent approach to company and industry best practice in relation to US specific ways to protect from noise hazards.

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Personnel who require knowledge or awareness of hydrates.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide awareness of how gas hydrates may be formed and the effects that they can have on pipeline flow assurance. The course examines what hydrates are, how they are formed and their molecular structure. It discusses flow assurance, details the risks of pipeline plugging by hydrates, and outlines the various methods of controlling hydrate formation.

How will this course benefit my company?

By ensuring you are aware of how gas hydrates may be formed and the effects that they can have on pipeline flow assurance.

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is the course for?

All relevant offshore personnel.

Is previous experience required? 

No previous experience is required to complete this course. 

How will the course benefit me?

This course aims to give offshore personnel the knowledge required to understand the hazards and controls associated with working in an environment where they could potentially be exposed to H2S.

How will the course benefit my company?

By ensuring you are aware of the hazards and controls associated with H2S exposure, which will in turn reduce incidents and accidents offshore.

What standards are referenced in the course?

• Control of Substances Hazardous to Health Regulations (COSHH)

• Health and Safety at Work Act

• Offshore Installations (Offshore Safety Directive)

• Offshore Installations (Safety Case)

• Offshore Installations (Prevention of Fire and Explosion, and Emergency Response) (PFEER)

• Offshore Installations and Wells (Design and Construction) Regulations

• EH40 Workplace Exposure Limits (WELs)

Is there an assessment? 

Yes - There is a course assessment with an 80% pass mark and 2 attempts. 

Learning objectives

- Identify the physical properties of H2S

- Recognise the physiological effects of exposure to varying toxicity levels of H2S

- Recognise the responsibilities and duties of all personnel and their duties under current legislation

- Recognise the current legal occupational exposure limits for short- and long-term exposure periods relating to H2S

- Identify the various methods for detecting H2S

- Identify the various personal and respiratory protection equipment required for undertaking tasks in areas where H2S may be present

- Recognise the hazardous area classifications which may be encountered on an offshore installation

- Identify the formal requirements for H2S contingency plans on installations

Who is this course for?

All personnel who are involved in the transportation or supporting of a load by hand or bodily force.

Is previous experience required?

No previous experience is required to complete this course. 

How will this course benefit me?

To increase learners’ awareness of the importance of safe manual handling operations and the risks involved with manual handling.

How will this course benefit my company?

This course will benefit a company by reducing manual handling accidents.

What standards are referred to in this course?

No standards or regulations are referenced in this course.

Is there an assessment?

Yes

Who is this course for?

Personnel who require an awareness or understanding of the accident and incident investigation processes.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide learners with an overview of industry best practice in relation to accident and incident investigation

How will this course benefit my company?

By ensuring you have an overview of industry best practice in relation to accident and incident investigation

What standards are referred to in this course?

Reporting of Injuries

Diseases and Dangerous Occurrences Regulations (RIDDOR) 2013

HSG245, Management of Health and Safety at Work Regulations 1999

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

All relevant personnel, including work party members, Performing Authorities and Area Authorities

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?

This course aims to provide the knowledge and techniques for carrying out effective toolbox talks

How will this course benefit my company?

By ensuring you have knowledge and know of techniques for carrying out effective toolbox talks

What standards are referred to in this course?

Control of Substances Hazardous to Health (COSHH) assessment

Safety Data Sheets (SDS)

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?
Deck Officers and Deck Crew who are involved in using the Emergency Towing Systems (ETS)

Is previous experience required?
No previous experience is required to complete this course. 

How will this course benefit me?
This course aims to provide learners with an introduction to Emergency Towing Systems (ETS) in the Maritime Industry.

How will this course benefit my company?

The course will benefit companies by ensuring that all possible precautions are taken to reduce injury to personnel whilst using the ETS.

What standards are referred to in this course?

• The International Convention for the Safety of Life at Sea

• IMO resolution MSC. 35(63) 

• IMO Resolution MSC. 132(75)

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is the course for?

Personnel who require an understanding of fire awareness as part of their role.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course aims to introduce, develop and increase learners’ knowledge and awareness of the importance of maintaining fire awareness and the actions to take in the event of an emergency.

How will the course benefit my company?

The course will benefit companies’ by helping to reduce fire related incidents by providing personnel with an awareness of actions to take in the event of an emergency.

What standards are referenced in the course?

Health and Safety at Work Act

The Management of Health and Safety at Work Regulations

The Regulatory Reform (Fire Safety) Order

The Fire (Scotland) Act

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Accreditation:

This course is approved by the Institution of Occupational Safety and Health (IOSH).

IOSH is the world’s Chartered body for safety and health professionals.

What that means:

We are the largest membership body for health and safety professionals.

We champion occupational safety and health causes and advocate for change.

We advise governments, NGOs and policymakers.

We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

We commission research and set national and international standards.

We shape the future of the profession.

Course goal: This course aims to provide the knowledge and techniques for carrying out gas testing.

This course contains the following sections:

Section 1: Introduction

Section 2: Hazards Associated with Gases and Vapours

Section 3: Flammable Atmospheres

Section 4: Fire and Explosions

Section 5: Toxic Atmospheres

Section 6: Oxygen Deficiency and Oxygen Enrichment

Section 7: The Hazards of Confined Spaces

Section 8: The Gas Monitor

Section 9: Using Gas Testing Equipment when Carrying out Fire Watch Duties

Section 10: Using the Gas Testing Equipment to Clear an Area Prior to Hot Work

Section 11: Using the Gas Testing Equipment to Identify a Potential Gas Leak

Section 12: Using the Gas Testing Equipment to Test the Atmosphere of a Confined Space Prior to Entry

Section 13: Using the Gas Testing Equipment during Purging Operations

Section 14: Final Assessment

Who is the course for?

All relevant personnel.

Is previous experience required?

No experience is required to complete this course.

How will the course benefit me?

This course aims to provide an overview of US best practice in relation to drug and alcohol awareness in the workplace.

How will the course benefit my company?

This course provides drug and alcohol awareness, information on company abuse, illegal drug use, and the abuse of prescription drugs. 

What standards are referenced in the course?

N/A

Is there an assessment?

Yes

Learning Objectives:

• Identify various types of common drugs

• Find company policies on alcohol and controlled substances

• Explain the various methods of alcohol and drug testing

• Explain the consequences of violating company drug and alcohol use policies

• Describe the effects of alcohol and drugs on the body and job performance

Course goal: This course provides learners with an awareness of the COSHH regulations, and how they control work with hazardous substances.

Learning Objectives

LO1 Explain the COSHH regulations and their applicability to the Oil and Gas Industry

LO2 Explain the legal obligations under COSHH for both employees and employers, and explain the REACH regulations

LO3 Explain the health effects of working with hazardous substances, and the various ways that these can enter the body

LO4 Explain the use of Safety Data Sheets, Labels and Assessments within the COSHH regulations

LO5 Explain the common labelling system and identify the standard symbols

LO6 Explain the appropriate use of Personal Protective Equipment

LO7 Explain requirements for storage, handling and disposal of hazardous substances

LO8  Define the control measures for handling hazardous substances and explain the control hierarchy

LO9 Explain the process for dealing with hazardous substances in the event of a spill

LO10 Define the recording and reporting process within the COSHH Regulations