Oil and Gas

Course catalogue

hits
50
Course code: MUK-233
Course type: E-learning course
Duration: 150 minutes
Language: English (US)

Who is this course for?

Personnel requiring an introduction to working with or around crane operations.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

 

How will this course benefit me?

This course aims to provide learners with an awareness of US best practice in relation to working with cranes.

 

How will this course benefit my company?

By ensuring you are aware of US best practice in relation to working with cranes.

 

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MUK-001-FT
Course type: E-learning course
Duration: N/A
Language: English

FAST TRACK is a learning method which provides you with bespoke learning content by identifying any knowledge gaps you may have in a particular subject area.

 

FAST TRACK is a pre-assessment learning tool which is designed to assess your existing knowledge of a particular subject area. The pre-assessment uses a pool of questions to test your current knowledge. The results of this assessment help identify your personal knowledge gaps. FAST TRACK then automatically creates abespoke course to address these knowledge gaps.

 

This course covers the following learning objectives:

 

LO1 Explain what is meant by a Confined Space

LO2 Give examples of Confined Spaces

LO3 Describe the dangers that can be caused by confined space entry work

LO4 Identify the key pieces of legislation that help to control confined space entry work

LO5 Explain how to avoid entering confined spaces

LO6 Explain the importance of having a Safe System of Work in place

LO7 Describe individual roles and responsibilities involved in Confined Space Entry work

LO8 Explain the requirements for gas testing

LO9 Identify acceptable levels for atmospheric test results

LO10 Give examples of Confined Space Entry site safety equipment

LO11 Explain the actions to take in an emergency situation

LO12 Explain Confined Space Entry alarm procedures

Course code: MUK-154
Course type: E-learning course
Duration: 2 hours 30 minutes
Language: English

Who is this course for?

Personnel involved with mechanical material handling equipment and operation, crane operation, rigging, supervision and signalling related activities. 

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role.

 

How will this course benefit me?

To provide learners with an awareness of industry best practice for working with cranes.

 

This course consists of 4 sections:

Section 1: Introduction to Crane Operations

Section 2: Cranes and Lifting Equipment

Section 3: Planning a Lift

Section 4: Carrying out a Lift

 

How will this course benefit my company?

By ensuring you are aware of industry best practice for working with cranes.

 

What standards are referred to in this course?

• The Lifting Operations and Lifting Equipment Regulations (LOLER) 

• The Provision and Use of Work Equipment Regulations (PUWER) 

• The Safe Use of Lifting Equipment: Approved Code of Practice (ACOP)

• Lifting Equipment at Work Guidance

• Personal Protective Equipment at Work Regulations

• Health and Safety at Work Act s.16

• Management of Health and Safety at Work Regulations

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MGM-043
Course type: E-learning course
Duration: 30 minutes
Language: English

Who is this course for?

Maritime personnel who may be affected by potential baggage searches.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course. 

 

How will this course benefit me?

This course aims to provide an introduction to personnel and baggage searches in the Maritime Industry.

 

How will this course benefit my company?

By ensuring you are aware of the personnel and baggage searches which might be carried out. 

 

What standards are referred to in this course?

SOLAS ch. 11 - ISPS code

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Course code: ITB-004
Course type: Blended course
Duration: 12 Months
Language: English

The OPITO Internal Verifier Award delivered through Blended Learning requires the following:

Computer/Laptop

Webcam

Printer/scanner

The Blended learning is delivered in Stages:

Stage 1 Online registration 1 hour to complete

Stage 2 Self study of the workbook provided

Stage 3 A live webinar 1 day of 6 hours. (sessions run once per week)

The following units will be discussed and practical exercises completed on the live webinar following a 1 hour Exam:

1. Introduction to Internal Verification

1.1 The Purpose of Internal Verification

2. The Internal Verifier’s Role

2.1 Supporting Assessors

2.2 Monitoring and Verifying the Quality of Assessments

2.3 Record Keeping and Feedback

2.4 Assuring the Competence Process

Delegates attending this Internal Verifier Blended Learning training programme will be given a series of explanations and demonstrations that will identify what they are expected to know and do. This will be followed by practical exercises allowing delegates to rehearse their skills, knowledge and understanding of the Internal Verifier role. All practical exercises conducted on the live webinar shall use, wherever possible, the actual paperwork that the delegates are expected to use in their workplace.

Stage 4- Workplace verifications to be completed within 12 months of training to become a fully qualifed OPITO Internal verifier 

OPITO Internal Verifier Award Standard 

Course code: MGM-041
Course type: E-learning course
Duration: 45 minutes
Language: English

Who is this course for?

Maritime personnel who require an introduction to or awareness of maritime Protection and Indemnity insurance.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course. 

 

How will this course benefit me?

This course aims to provide personnel with an awareness of the principles of maritime Protection and Indemnity Insurance.

 

How will this course benefit my company?

By ensuring you have an understanding of the maritime Protection and Indemnity Insurance. 

 

What standards are referred to in this course?

The Marine Insurance Act.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Course code: MUK-135
Course type: E-learning course
Duration: 30 minutes
Language: English

Who is this course for?

Personnel requiring an awareness and understanding of radio operation and required communication methods.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

 

How will this course benefit me?

This course aims to provide learners with an overview of the steps to be taken, and the terminology and phraseology to be used, by radio operators when communicating with offshore helicopter traffic.

 

How will this course benefit my company?

To ensure all involved personnel understand a common methodoclogy of the steps to be taken, and the terminology and phraseology to be used, by radio operators when communicating with offshore helicopter traffic.

 

What standards are referred to in this course?

MAR Regulations

UK Offshore Operators Association (UKOOA)’s Guidelines for the Management of Offshore Helideck Operations

Civil Aviation Authority’s CAP 452 Aeronautical Radio Station Operator’s Guide

CAP 413 Radiotelephony Manual

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MUK-228
Course type: E-learning course
Duration: 130 minutes
Language: English

Who is this course for?

Personnel requiring an awareness or understanding of asset stability.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

 

How will this course benefit me?

This course aims to provide learners with a basic understanding of the principles of asset stability.

 

This course consists of following sections:

Section One: ‘An Introduction to Asset Stability’

Section Two: ‘Understanding the Curve of Statical Stability (GZ Curve)’

Section Three: ‘Free Surface Effect’

Section Four: ‘Stability Criteria and Regulations’

Section Five: ‘Structural Strength’

 

How will this course benefit my company?

By ensuring you have a basic understanding of the principles of asset stability.

 

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: BVS-038
Course type: E-learning course
Duration: 2 hours
Language: English

Presentation

 

This training course is about what an effective cyber security risk management should be. Its goal is not to address too many technical questions as the best technical expertise in the world won’t guarantee zero cyber risk. The course aims at providing your Company with a real battle plan: know the assets, know the enemies, organize accordingly and train the effectives. Although this will not be enough to avoid a cyber incident, the severity of the consequences of a cyber incident will depend on the company’s preparedness and ability to manage it.

 

Who the course is for?

 

The course ISM Code and Cyber Risk Management is aimed at anyone interested in understanding how an effective cyber security risk management should be. This may include Top Management of Shipping Companies, Ship Managers, Technical Superintendents, Ship Masters, Officers and Seafarers; Offshore Units Operators and Technical Staff, Shipyards Technical Staff; Surveyors; P&I and/or Insurance Inspectors; etc.

 

Objectives

 

On completion of the training, students will be able to:

Know what cyber security is, the main threats and their consequences.

Understand how to consider the cyber risks in the Safety Management System and how the ISM Code translated into cyber security.

Know the 12 cybersecurity commandments that will help implementing an efficient cyber risk management system.

Course code: BVS-032
Course type: E-learning course
Duration: 1 hour
Language: English

Presentation

This training course provides a general overview of the SOLAS requirements concerning radio communications and the Global Maritime Distress and Safety System (GMDSS).

Objectives

On completion of the training, students will be able to:

Know the requirements concerning radio communication equipment on board ships and offshore units.

Understand the GMDSS functional requirements.

Understand the means required for GMDSS tests and drills on board.

Know the requirements for EPIRB, radio lifesaving appliances and sources of energy for radio communication equipment.

Program

Safety radio surveys and certification

GMDSS functional requirements

o Land and satellite communications

o Inmarsat

o Functional requirements while at sea

o Distress urgency and safety radio communications

o Sea areas

o Maintenance of radio installation

o Maintenance of satellite EPIRB

o Maritime safety information

GMDSS equipment

o Equipment to be provided on board

o Core installation

o Inmarsat EGC

o NAVTEX

o Satellite EPIRB and VHF EPIRB

o Search and Rescue Transponder (SART)

o Digital Selective Calling (DSC)

o Two-way VHF radio-telephone

Main, emergency and reserve sources of power

Automatic battery chargers

Uninterrupted power supply (UPS)

Certificate

On completion of the training program, the student will be awarded:

A Certificate of SOLAS Safety Radio, issued by Bureau Veritas Solutions Marine & Offshore.

The Certificate of SOLAS Safety Radio is obtained after completion of the course and passing the online test.

Course code: MUK-227
Course type: E-learning course
Duration: 120 minutes
Language: English

Who is this course for?
Offshore Marine Technicians

Is previous experience required?
You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?
This course provides an introduction to radar systems and their use within the Oil and Gas Industry.

How will this course benefit my company?
By ensuring you are aware of the how phase behaviour and multiphase flow regimes can impact on hydrocarbon delivery.

What standards are referred to in this course?
N/A

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MUK-149
Course type: E-learning course
Duration: 15 Minutes
Language: English

Who is this course for?

Personnel who require awareness or understanding of safety measures to take when using grinding equipment.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

 

How will this course benefit me?

This course aims to provide personnel with an overview of industry best practice in relation to the safe use of grinding equipment

 

How will this course benefit my company?

By ensuring you have an overview of the use of industry best practice in relation to the safe use of grinding equipment

 

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%. 

Course code: MUK-250
Course type: E-learning course
Duration: 1 hour 30 minutes
Language: English (US)

Course Goal:

This course aims to give an overview of US best practice in relation to rigging and lifting operations 

 

Learning Objectives:

 

Section 1: Introduction to Lifting and Rigging

 

LO1 Give an overview of the lifting operations used in the Oil and Gas Industry

LO2  Outline standards that govern lifting and rigging operations

LO3 Describe the relevant roles and responsibilities involved in lifting and rigging operations

LO4  Describe the role of the Responsible Person 

LO5  Describe the role of the Competent Person 

LO6  Describe the role of the Lift Supervisor 

LO7  Describe the role of the Technical Authority

LO8  Describe the role of the Spotter

LO9  Describe the role of the Crane Operator

LO10 Describe the role of the Rigger

LO11 Outline the main hazards associated with lifting and rigging operations

 

Section 2: Planning a Lift

LO12 Outline the documentation used in planning a lift 

LO13 Describe the purpose and general layout of a lift plan

LO14 Describe how using a lifting operations flowchart can help lift planning 

LO15 Describe the risk assessment process in lifting operations

LO16 Outline the importance of certification

LO17 Describe the use of lift plan checklist sheets

 

Section 3: Undertaking Lifts

LO18 Outline lifting equipment selection

LO19 Describe rigging selection

LO20 Outline positioning considerations 

LO21 Describe the Tool Box Talk

LO22 Outline pre-lift checks

LO23 Describe the safe execution of the lift

LO24 Describe the importance of stopping the job

LO25 Explain how lessons learned and a close-out report can assist in future lifts

 

Section 4: Rigging Operations without the Use of a Crane

LO26  Describe the use of structures as rigging anchor points

LO27  Describe the use of slings and the angle load factor

 

Course code: MUK-231
Course type: E-learning course
Duration: 1 Hour 30 Minutes
Language: English

Course Goal:

This course aims to provide an introduction to each key phase of the exploration and production industry in the US.

  

Learning Objectives 

 

1. History of the Oil and Gas Industry 

LO1 Give an overview of the origins of hydrocarbons

LO2 Explain how oil and gas reservoirs are formed

LO3 Identify types of reservoir rock and fluid properties

LO4 Explain the difference between Upstream vs. Downstream 

 

2. Energy Supply and Demand 

LO5 Give an overview of oil and gas supply and demand 

LO6 Give an overview of the costs involved in oil and gas production

LO7 Identify global oil and gas fields 

 

3. Field Life Cycle

LO8 Give an overview of the stages involved in the exploration and production process

 

LO09 Give an overview of the processes and methods used to search for oil and gas

LO10 Explain how oil and gas discoveries are developed

LO11 Explain the purpose of seismic technology

LO12 Describe the differences between onshore and offshore developments

LO13 Give an overview of how offshore platforms and pipelines are installed

LO14 Give an overview of the equipment and processes involved in drilling a well

LO15 Explain how to complete a well and prepare it for production

LO16 Identify different types of oil and gas structures

LO17 Describe what is meant by ‘shallow water’ and ‘deep water’ developments

LO18 Explain reservoir production mechanisms

LO19 Give an overview of artificial lift systems

LO20 Explain what is meant by well stimulation 

LO21 Explain the process for the production and treatment of reservoir fluids

LO22 Identify the main methods used to transport offshore oil and gas onshore 

LO23 Explain the process of refining oil and gas 

LO24 Provide an overview of well workover operations

LO25 Give an overview of decommissioning obligations and solutions 

 

The Future

LO26 Give an overview of future energy demand

LO27 Explain how to ensure security of supply

 

Course code: BVS-014
Course type: E-learning course
Duration: 1 hour
Language: English

Presentation

This training course provides a general overview of the MARPOL requirements to prevent air pollution from ships and offshore units.

Objectives

On completion of the training, students will be able to:

Know the international regulations related to the prevention of air pollution from ships and offshore units.

Understand the requirements for the control of emissions of substances from ships and offshore units.

Get familiar with the requirements concerning shipboard incineration and fuel oil quality.

Understand the concept of energy efficiency and related MARPOL requirements.

Know the various surveys required and the different certificates and documents to be available on board.

Program

Application

International regulations: ozone-depleting substances (ODS), nitrogen oxides (NOx)

Control of emissions

o Ozone-depleting substances (ODS)

o Nitrogen oxides (NOx)

o Sulphur oxides (SOx) and particulate matter

o Volatile organic compounds (VOC)

Shipboard incineration

Fuel oil quality

Bunker delivery notes

Energy efficiency design index (EEDI)

Ship energy efficiency management plan (SEEMP)

Survey and certification

Certificate

On completion of the training program, the student will be awarded:

A Certificate of MARPOL Air Pollution, issued by Bureau Veritas Solutions Marine & Offshore.

The Certificate of MARPOL Air Pollution is obtained after completion of the course and passing the online test.

Course code: BVS-036
Course type: E-learning course
Duration: 1 hour
Language: English

Presentation

This training course is based on the Convention on the International Regulations for Preventing Collisions at Sea - 1972, (COLREG 72), which aims at determining the signalling system requirements for safe navigation.

Objectives

On completion of the training, students will be able to: Get familiar with steering and sailing rules. Understand the meaning and the positioning of navigation lights. Know the requirements of the Convention concerning lights, shapes and sound signals.

Program

Application and responsibilities

Definitions

Steering and sailing rules

o Conduct of the vessel in any conditions of visibility

o Conduct of the vessel in sight of one another

o Conduct of the vessel in restricted visibility

Lights and shapes

o Technical specification of lights

o Technical specification of shapes

o Definitions

o Visibility of lights

o Applicability: power-driven vessels, towing and pushing, sailing vessels, fishing vessels, vessels not under command, vessels restricted in their ability to manoeuvre, vessels constrained by their draught, anchored vessels and vessels aground

Sound and light signals

o Whistle

o Bell

o Gong

o Vessel equipment for sound signals

o Manoeuvring and warning signals

o Sound signals in restricted visibility

Certificate

On completion of the training program, the student will be awarded the following qualifications:

Certificate of COLREG awarded by Bureau Veritas Solutions Marine & Offshore.

The Certificate of COLREG, issued by Bureau Veritas Solutions Marine & Offshore, is obtained after completing the course and passing the qualification examination.

Course code: BVS-037
Course type: E-learning course
Duration: 1 hour
Language: English

Presentation

This training course provides general information about cybersecurity in the Maritime Industry. It describes the main cybersecurity issues regarding the use of computer-based equipment in the professional environment and proposes ways to protect oneself from hackers.

Objectives

On completion of the training, students will be able to:

Understand that we are living in a digital ultra-connected world;

Know about main cyberattacks and ways to keep protected from them;

Enforce main cybersecurity rules on ships;

Understand Internet best practices and implement them;

Be cautious when using social networks.

Program

Digital revolution

o Digitalization transforms the world, your environment, your work on ships

o You are connected = you are vulnerable

o Internet is NOT a lawless zone

Cyberattacks on board and on a daily basis

o What is ransomware, and how to react to it

o How to use antivirus

o How to care about and protect data

o Why updates are necessary

o Why be cautious with unknown Wi-Fi networks

E-mail (professional and personal) best practices

o How to recognize corrupted e-mails from legit ones

o Think before you click

o How to react to the detection of a suspicious e-mail

Passwords

o How to protect them, how to generate them

Social networks

o Have you become a “like” addict

o Protect your e-reputation

o Protect your Company e-reputation

Your digital environment on board

o Your ship is like a connected factory

o How to react in case of a potential cybersecurity breach/incident

Certificate

On completion of the training program, the student will be awarded:

A Certificate of Cybersecurity Awareness in Maritime Environment, issued by Bureau Veritas

Solutions Marine & Offshore.

The Certificate of Cybersecurity Awareness in Maritime Environment is obtained after completing the course and passing the online test.

Course code: BVS-035
Course type: E-learning course
Duration: 4 hours
Language: English

Presentation

This training course composed of 2 modules provides an overview of the requirements of the Ballast Water Management International Convention and the technical aspects related to the ballast water treatment equipment.

Objectives

On completion of the training, students will be able to:

Understand the background of the Ballast Water Management Convention, its structure and the most important regulations

Know the difference between the ballast water exchange and the performance standards

Understand the role of all stakeholders and actors

Be familiar with the approval, inspections, commissioning and tests of Ballast Water

Management systems

Understand the survey and certification requirements

Be familiar with the different technologies used and the installation requirements

Program

Module 1 – BWM Regulatory Aspects

Background

The Ballast Water Management Convention

Duties of the main stakeholders 

Ballast Water Management Standards

USCG Position 

Module 2 – BWM Technical Aspects

BWM Surveys

International Ballast Water Management Certificate

BWM System Approval

Sampling

Ballast water treatment systems technologies

Ballast water treatment systems installation

Certificate

On completion of the training program, the student will be awarded:

A Certificate of Ballast Water Management, issued by Bureau Veritas Solutions Marine & Offshore.

The Certificate of Ballast Water Management is obtained after completion of the course and passing the online test. 

Course code: BVS-001
Course type: E-learning course
Duration: 2 hours
Language: English

Presentation 

This training course provides general information about welding of aluminium structures. It contains an introduction to aluminium properties and describe the main issues regarding weldability of aluminium and its alloys. 

Objectives 

On completion of the training, students will be able to: 

Know the properties of aluminium and its alloys comparing to steel 

Understand the issues regarding weldability of aluminium alloys 

Recognize the main problems that can arise during design and production of aluminium ship’s structures 

Know the suitable welding processes for joining of aluminium ship hull 

Understand the application of bimetallic joints. 

Program 

Properties of aluminium alloys 

o Specific properties 

o Heat treatable and non-heat treatable aluminium alloys 

o Marine aluminium alloys 

o Designation of aluminium alloys 

Weldability of aluminium 

o Characteristics of aluminium referring to welding 

o Main issues: gas porosity, oxide inclusions and lack of fusion, hot cracking, reduced 

strength in the weld and heat affected zone, distortion 

o Choice of filler material 

Welding processes for aluminium 

o MIG aluminium welding 

o TIG aluminium welding 

o Typical defects in aluminium welding 

Joining of steel and aluminium in shipbuilding 

o Bimetallic strip for transition joints 

Preparation and design of welds 

o Guidelines for aluminium joint design 

o Examples of joints 

o Application of backing 

o Defects caused by poor preparation 

o Recommendations for aluminium welding

Certificate 

On completion of the training program, the student will be awarded the following qualifications:

Certificate of Aluminium Welding awarded by Bureau Veritas Solutions Marine & Offshore.

The Certificate of Aluminium Welding, issued by Bureau Veritas Solutions Marine & Offshore, is obtained after completing the course and passing the qualification examination. 

Course code: BVS-007
Course type: E-learning course
Duration: 1,5 hours
Language: English

Presentation 

This training course provides a general introduction to dynamic positioning systems, which are computer-controlled systems that automatically maintain the vessel's position and heading by using their propellers and thrusters. 

Objectives 

On completion of the training, students will be able to: 

Get familiar with dynamic positioning systems. 

Know the main components of dynamic positioning systems, equipment used and installation. 

Know the Class requirements in terms of surveys and tests of dynamic positioning systems 

Program 

History 

Characteristics and scope of DP systems 

Applications 

Equipment class 

Classification notations 

System configuration: power system, thruster system, control system, position reference systems, computer system, display system 

Redundancy 

o Redundant systems 

o System failures 

o Redundancy concept 

o Terms 

o Single fault tolerance 

o FMEA 

Design environment 

Essential non-DP systems 

Performance analysis 

Operational requirements 

System components 

o Power system 

o Thruster system 

o DP control system 

o Position reference system: acoustical, taut-wire and other reference systems 

Scope of DP surveys 

o Inspections at works 

o Surveys during construction, tests and trials 

o Surveys during operation: Annual and Renewal surveys, operational test, Occasional surveys

Certificate 

On completion of the training program, the student will be awarded the following qualifications:

Certificate of Introduction to DP System awarded by Bureau Veritas Solutions Marine & Offshore.

The Certificate of Introduction to DP System, issued by Bureau Veritas Solutions Marine & Offshore, is obtained after completing the course and passing the qualification examination.

Hits per page