Oil and Gas

Course catalogue

hits
296
Course code: IMIST-001
Course type: E-learning course
Duration: 300 minutes
Language: English

Who is the course for?

This eLearning course is aimed at individuals who work offshore, in any role, anywhere in the world.

 

Is previous experience required?

The course is designed for existing workers in the oil and gas industry. Completion of this course awards an IMIST certificate valid for four years, after which you will need to sit the course again to refresh your knowledge and earn a new certificate.

 

How will the course benefit me?

The offshore working environment is home to many hazards, which means that it is vital for everyone who goes offshore to have the same baseline level of safety knowledge. This course has been created with OPITO to set a global safety standard by applying a consistent level of safety awareness across nine safety critical areas and is applicable .

The knowledge gained in this course will help you to stay safe in your day-to-day activities offshore. It will also outline some of the systems and procedures in place to manage everyday operations offshore.

 

How will the course benefit my company?

By ensuring that your safety knowledge is at or above the baseline level, your company can rest assured that you are able to work offshore safety and in compliance with regulations and company procedures. Increased safety knowledge helps to prevent incidents and makes your working environment a safer place.

 

What standards are referenced in the course?

This course is written based on the OPITO standard International Minimum Industry Safety Training Standard (IMIST) (5312). As a global standard, the course is not written to meet any specific regional legislation but references industry best practices and standard operating procedures throughout.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 100%. 

The course starts with an optional pre-assessment that checks your existing knowledge of the course topics. The course will restructure so that it only contains the content needed to address the gaps in your knowledge.


Please find pre-course information and learning outcomes here: 

https://mintra.com/implementing-maintaining-opito-standards-policy

Course code: MUK-029
Course type: E-learning course
Duration: 20 minutes
Language: English

Who is the course for?

This is course is for those who work with and have an exposure risk to benzene. 

 

Is previous experience required?

No previous experience is required to complete this course. 

 

How will the course benefit me?

This course will benefit learners by providing them with an awareness of benzene and providing best practices for working with benzene in oil and gas producing facilities.

 

How will the course benefit my company?

The course will benefit companies by ensuring that all possible precautions are taken to reduce accidents or injuries resulting from benzene exposure.  

 

What standards are referenced in the course?

Control of Substances Hazardous to Health (COSHH) Regulations

OSHA, the Occupational Safety and Health Administration

 

Is there an assessment?

Yes 

 

Accreditation

This course is approved by the Institution of Occupational Safety and Health (IOSH).

IOSH is the world’s Chartered body for safety and health professionals. 

 

What that means:

We are the largest membership body for health and safety professionals.

We champion occupational safety and health causes and advocate for change.

We advise governments, NGOs and policymakers.

We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

We commission research and set national and international standards.

We shape the future of the profession.

Course code: MUK-007
Course type: E-learning course
Duration: 45 minutes
Language: English

Who is this course for?

Personnel who are involved in work processes that can result in hand-arm vibration exposure.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course will benefit learners’ by making them aware of the risks of hand-arm vibration and the effects that it can cause.

How will this course benefit my company?

This course will benefit companies’ by ensuring that personnel have an understanding of the risks of hand-arm vibration and in turn will reduce the number of injuries that result from this.

What standards are referred to in this course?

Health and Safety Executive (HSE)

Control of Vibration at Work Regulations

Supply of Machinery (Safety) Regulations

Is there an assessment?

Yes


Accreditation:

This course is approved by the Institution of Occupational Safety and Health (IOSH).

IOSH is the world’s Chartered body for safety and health professionals.


What that means:

We are the largest membership body for health and safety professionals.

We champion occupational safety and health causes and advocate for change.

We advise governments, NGOs and policymakers.

We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

We commission research and set national and international standards.

We shape the future of the profession.

 

Course code: MUK-073
Course type: E-learning course
Duration: 45 minutes
Language: English

Who is this course for?

Personnel requiring awareness and understanding of common spill events and actions taken to rectify.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

 

How will this course benefit me?

To provide learners with an awareness of the potential environmental impacts associated with spills, and the legislative and control measures in place to avoid these. This course also focuses on spill contingency planning and the spill response measures that should be taken in the event of a spill.

 

How will this course benefit my company?

By ensuring you are aware of the potential environmental impacts associated with spills, and the legislative and control measures in place to avoid these.

 

What standards are referred to in this course?

Merchant Shipping (Oil Pollution Preparedness, Response & Co-operation Convention) Regulations (OPRC)

Offshore Installations (Emergency Pollution Control) Regulations (EPC) 

Offshore Petroleum Activities (Oil Pollution Prevention and Control) Regulations (OPPC) 

Offshore Chemicals Regulations 

Offshore Chemicals (Amendment) Regulations

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MUK-118
Course type: E-learning course
Duration: 30 minutes
Language: English

Who is the course for?

All personnel who work in the maritime industry and would benefit from an awareness of the International Ship and Port Facility Security (ISPS) Code.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course aims to provide an overview of the International Ship and Port Facility Security (ISPS) Code.

How will the course benefit my company?

The course will benefit companies by ensuring that all relevant personnel have an understanding of the International Ship and Port Facility Security (ISPS) Code, the security attacks that can occur at sea and how to act in an emergency situation.

What standards are referenced in the course?

International Convention for the Safety of Life at Sea (SOLAS)

The International Ship and Port Facility Security (ISPS) Code

Is there an assessment? 

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

 

Course code: MUK-009
Course type: E-learning course
Duration: 45 minutes
Language: English

Who is this course for?

All personnel who could potentially be exposed to noise in the workplace. 

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role.

How will this course benefit me?

This course aims to provide personnel with the knowledge required to understand the hazards and controls associated with noise in the workplace.

How will this course benefit my company?

By ensuring personnel are aware of the hazards posed by noise in the workplace and the controls that should be put in place to minimise their exposure and reduce the risk of hearing loss.

What standards are referred to in this course?

Control of Noise at Work Regulations

Is there an assessment?

Yes

 

Accreditation:

This course is approved by the Institution of Occupational Safety and Health (IOSH).

IOSH is the world’s Chartered body for safety and health professionals. 

 

What that means:

We are the largest membership body for health and safety professionals.

We champion occupational safety and health causes and advocate for change.

We advise governments, NGOs and policymakers.

We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

We commission research and set national and international standards.

We shape the future of the profession.

Course code: MTP-033
Course type: E-learning course
Duration: 1 hour
Language: Norwegian, English

Who is the course for?

All people exposed to noise in their daily work.


Is previous experience required?

No previous experience is required.


How will the course benefit me?

The purpose of the course is to prevent noise-induced hearing impairment. You will learn how loud sound and noise affect us. You will also learn how you can properly protect yourself against noise and why that is so important.


How will the course benefit my company?

This course will benefit your company be ensuring that you are familiar with the safety precautions you should take in the workplace to protect your hearing.


What standards are referenced in the course?

The course is based on the current rules and regulations for working in areas where there is a risk of being exposed to noise that may be damaging to health.


Is there an assessment?

Yes

Course code: MTP-035
Course type: E-learning course
Duration: 70 minutes + Onboar ...
Language: English, Norwegian, Br ...

Who is this course for:
Every seafarer without designated security duties (STCW Table A-VI/6-1)

Is previous experience required?
You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?
Piracy and armed robbery is a real threat to seafarer’s onboard ships and mobile units at sea. 1st January 2014 a requirement about seafarer’s security training was put in force for all ships to which the ISPS Code applies.


The training consists of an e-learning course and the performance of certain on board activities described in a checklist. The client’s approved instructors must sign completed checklists for each trainee.

When the training is completed a certificate is issued by the Norwegian Maritime Authority.

How will this course benefit my company?
By ensuring you have the knowledge and are certified according to the STCW regulations.

What standards are referred to in this course?
STCW - Security Awareness, table A-VI/6-1
This training programme in Ship Security Awareness has been approved by the Norwegian Maritime Authority.

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MUK-019
Course type: E-learning course
Duration: 60 minutes
Language: English

Who is this course for?
Production operators.

Is previous experience required?
No previous experience is required to complete this course.

How will this course benefit me?
This course aims to provide appropriate knowledge of the techniques required for carrying out pressure testing and leak testing in the workplace.

How will this course benefit my company?
By ensuring you have appropriate knowledge of the techniques required for carrying out pressure testing and leak testing in the workplace.

What standards are referred to in this course?
This course does not refer to specific legislation or standards.

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.


Accreditation:

This course is approved by the Institution of Occupational Safety and Health (IOSH).

IOSH is the world’s Chartered body for safety and health professionals.

 

What that means:

We are the largest membership body for health and safety professionals.

We champion occupational safety and health causes and advocate for change.

We advise governments, NGOs and policymakers.

We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

We commission research and set national and international standards.

We shape the future of the profession.

Course code: MUK-137
Course type: E-learning course
Duration: 45 minutes
Language: English, Norwegian

Course goal: This course aims to increase learners’ awareness of the environmental aspects and impacts related to the Oil and Gas Industry and the actions that can be taken to minimise environmental damage.

 

Learning Objectives

LO1 Identify the main environmental issues that affect the Oil and Gas industry

LO2 Explain the importance of being an environmentally responsible company

LO3 Explain the company’s commitment to managing environmental issues

LO4 Explain the role of ISO 14001 in environmental management

LO5 Explain the role of the Regulator

LO6 Define what is meant by environmental ‘aspects’ and ‘impacts’

LO7 Identify the activities that can contribute towards atmospheric pollution 

LO8 Identify the activities that can contribute towards water pollution

LO9 Identify typical spill sources

LO10 Describe the environmental effects of chemical discharges

LO11 Identify the sources and impacts of disturbance of the seabed by the Oil and Gas Industry 

LO12 Identify the sources and impacts of noise from oil and gas operations 

LO13 Identify the activities that can generate waste

LO14 Describe ways in which the impact on the environment can be minimised

LO15 Explain that everyone has a role to play in protecting the environment

Course code: MUK-207
Course type: E-learning course
Duration: 30 minutes
Language: English (US)

Who is this course for?

Personnel requiring an awareness or understanding of US CLP and GHS applications.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

 

How will this course benefit me?

This course aims to ensure that relevant personnel in the US have a common and consistent understanding of GHS and CLP.

 

How will this course benefit my company?

By ensuring you have a common and consistent approach to company and industry best practice in relation to US GHS and CLP.

 

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MUK-199
Course type: E-learning course
Duration: 30 minutes
Language: English

Who is this course for?
All relevant personnel.

Is previous experience required?
You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?
This course aims to provide you with an awareness of bloodborne pathogens, common modes of transmission, methods of prevention, and what to do if exposure occurs.

How will this course benefit my company?
By ensuring you are aware of the bloodborne pathogens, common modes of transmission, methods of prevention, and what to do if exposure occurs.

What standards are referred to in this course?
N/A

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MUK-074
Course type: E-learning course
Duration: 30 minutes
Language: English

Who is this course for?

All personnel who work in the Oil & Gas industry in roles that are involved in oily discharges to sea.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

To provide learners with an awareness of the potential environmental impacts associated with oily discharges to sea, as well as the legislation and control measures that are in place to minimise these impacts.

How will this course benefit my company?

The course will benefit companies by ensuring that all relevant personnel are aware of ways to safely remove oily discharges which will help to take care of the environment.

What standards are referred to in this course?

• Offshore Petroleum Activities (Oil Pollution Prevention and Control) OPPC Regulations 2005

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MUK-122
Course type: E-learning course
Duration: 15 minutes
Language: English

Who is this course for?

Personnel requiring an awareness or understanding of common RPE and what they are used for.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

 

How will this course benefit me?

This course aims to give personnel an introduction to different types of respiratory protection and describe its use in the workplace.

 

How will this course benefit my company?

By ensuring you have had an introduction to different types of respiratory protection and describe its use in the workplace.

 

What standards are referred to in this course?

Health and Safety at Work etc. Act 1974

Management of Health and Safteey at Work Regulations 1999

Control of Substances Hazardous to Health Regulations (COSHH) 2002

Control of Asbestos Regualtions 2012

Control of Lead at Work Regulations 2002

Ionising Radiations Regulations 1999

Confined Space Regulations 1997

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MUK-032
Course type: E-learning course
Duration: 20 minutes
Language: English

Who is the course for?

All personnel who may be exposed to nitrogen in the workplace.

 

Is previous experience required?

No previous experience is required to complete this course. 

 

How will the course benefit me?

This course aims to provide learners with an awareness of nitrogen and provide best practice for work involving nitrogen in oil and gas producing facilities.

 

How will the course benefit my company?

The course will benefit companies by ensuring that all relevant personnel understand the best practice when working with nitrogen in oil and gas producing facilities.

 

What standards are referenced in the course?

Control of Substances Hazardous to Health (COSHH) Regulations 

Health and Safety Executive (Health and Safety Executive (HSE)

The Occupational Safety and Health Administration (OSHA)

 

Is there an assessment?

Yes

 

Accreditation:

This course is approved by the Institution of Occupational Safety and Health (IOSH).

IOSH is the world’s Chartered body for safety and health professionals.

 

What that means:

We are the largest membership body for health and safety professionals.

We champion occupational safety and health causes and advocate for change.

We advise governments, NGOs and policymakers.

We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

We commission research and set national and international standards.

We shape the future of the profession.

Course code: MTP-036
Course type: E-learning course
Duration: 45 minutes
Language: English, Norwegian

Who is this course for?

This Working in Cold Environments course is for personnel who require an introduction to or awareness of working in cold climates.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

 

How will this course benefit me?

Working in cold environments can be a significant challenge for comfort and the ability to perform work tasks in a safe and efficient manner. 

 

How will this course benefit my company?

By ensuring you have are aware of the challenges to perform work tasks in cold environments. 

 

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

 

Course code: MGM-023
Course type: E-learning course
Duration: 50 minutes
Language: English

Who is this course for?
Any members of management, supervisor and shipboard management responsible for Ballast Water.

Is previous experience required?
You do not need prior knowledge or experience to complete this course.

How will this course benefit me?
The primary goal of this course are awareness and knowledge of Ballast Water Management in accordance with the International Convention for the Control and Management of Ships' Ballast Water and Sediments, referred to as the BWM Convention.

How will this course benefit my company?
By ensuring you are familiar with the best practices related to Ballast Water Management.

What standards are referred to in this course?
In compliance with IMOs Ballast Water Management Convention (BWMC) 2004 and industry best practice, and complying with US trade and US Coast Guard.

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Course code: MUK-072
Course type: E-learning course
Duration: 30 minutes
Language: English

Who is this course for?

Personnel requiring an awareness and understanding of common practices and legislation for chemical use and discharges.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

 

How will this course benefit me?

To provide learners with an awareness of the environmental impacts associated with the use and discharge of chemicals in the Oil and Gas Industry and the legislation and control measures that are in place to minimise the impact on the environment.

 

How will this course benefit my company?

By ensuring you are aware of the environmental  impacts associated with the use and discharge of chemicals in the Oil and Gas Industry and the legislation and control measures that are in place to minimise the impact on the environment.

 

What standards are referred to in this course?

Offshore Chemical Regulations 2002

Offshore Chemicals (Amendment) Regulations 2011

Offshore Petroleum (Oil Pollution Prevention and Control) Regulations

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MUK-015
Course type: E-learning course
Duration: 30 minutes
Language: English

Who is this course for?

All personnel within the Oil and Gas Industry.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course aims to increase learners’ awareness of the importance of Personal Protective Equipment (PPE), and outline the legal duties and responsibilities of employers and employees in relation to PPE.

How will this course benefit my company?

The course will benefit companies by reducing PPE related incidents and injuries. 

What standards are referred to in this course?

Control of Lead at Work Regulations 

Ionising Radiations Regulations 

Control of Asbestos at Work Regulations 

Control of Substances Hazardous to Health Regulations 

Control of Noise at Work Regulations

Personal Protective Equipment at Work Regulations

Is there an assessment?

Yes.


Accreditation:

This course is approved by the Institution of Occupational Safety and Health (IOSH). 

IOSH is the world’s Chartered body for safety and health professionals.

What that means:

We are the largest membership body for health and safety professionals.

We champion occupational safety and health causes and advocate for change.

We advise governments, NGOs and policymakers.

We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

We commission research and set national and international standards.

We shape the future of the profession.

Course code: MTP-037
Course type: E-learning course
Duration: 30 minutes
Language: English, Norwegian

Who is this course for:
All employees working in ISPS-areas.

Is previous experience required?
You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?
Basic knowledge of ISPS rules and regulations applicable to international ports and harbours. The course objective is to raise awareness of possible threats to international ports and harbours. Completed course normally gives access to ISPS-areas on harbours.

How will this course benefit my company?
By ensuring you have the knowledge related to ISPS rules and regulatins applicable to international ports and harbours.

What standards are referred to in this course?
ISPS code

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Hits per page
| 2 ... |