Course catalogue

Who is this course for?

This course is suitable for all personnel to assist in first aid.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course is designed to enable personnel to treat a casualty who is injured at work, or suffers from a serious illness, while waiting for qualified medical assistance to arrive.

How will this course benefit my company?

By ensuring you enable personnel to treat a casualty who is injured at work, or suffers from a serious illness, while waiting for qualified medical assistance to arrive.

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course goal: This course aims to introduce, develop and increase learners’ knowledge and awareness of the importance of Risk Assessment and how it can reduce the likelihood of accidents in the workplace.

Learning Objectives

LO1 Explain the principles of, and steps involved in, the Risk Assessment process
LO2 Explain that employers have a responsibility for completing Risk Assessments and that employees have a duty to follow Risk Assessment outcomes
LO3 Identify a typical Risk Assessment form
LO4 Explain the requirements of the Risk Assessment team
LO5 Recognise and explain Risk Assessment terminology
LO6 Identify the different steps within the Risk Assessment process
LO7 Identify common, industry-specific hazards
LO8 Determine the appropriate level of Risk Assessment that may be required
LO9 Explain how to use a Risk Matrix to evaluate the level of risk
LO10 Explain how to identify appropriate control measures based on the Hierarchy of Control
LO11 Explain what is meant by ‘Initial Risk’ and ‘Residual Risk’
LO12 Describe what to do if any Residual Risk remains too high
LO13 Explain how to carry out a Personal Risk Assessment and recognise its importance before each task
LO14 Explain the importance of Dynamic Risk Assessment
LO15 Identify situations where ‘Stopping the Job’ may apply
LO16 Explain the importance of communicating the outcomes of a Risk Assessment
LO17 Understand the importance of communicating ‘Lessons Learned’

Ce cours devrait vous permettre de :

• Acquérir une meilleure compréhension des dangers associés au sulfure d'hydrogène et des mesures de détection et de protection nécessaires à mettre en place et à respecter

• Identifier les niveaux et limites légaux d'exposition professionnelle qui ont été mis en place pour votre protection

• Expliquer les responsabilités des employeurs concernant la gestion des risques associés à une exposition potentielle au sulfure d'hydrogène sur le lieu de travail

• Expliquer les devoirs des employés quant à l'observation des procedures pertinentes relatives au sulfure d'hydrogène et au suivi des recommandations fournies par les employeurs ou les propriétaires d'installation.

Course Goal: 

This course aims to provide an awareness of US best practice in relation to working with Naturally Occurring Radioactive Material (NORM).

Learning Objectives:

LO1 Define what is meant by NORM and where it is found

LO2 Explain what is meant by ‘radioactive material’ and the difference between alpha particles, beta particles and gamma rays

LO3 Describe the hazards associated with NORM

LO4 Identify the pathways for exposure to NORM

LO5 Identify the radiation protection principles

LO6 Explain the importance of radiation monitoring

LO7 Identify control measures that can be used to minimize the risk posed by NORM

LO8 Describe the PPE that should be used when working with NORM

LO9 Explain how to limit decontamination and correctly dispose of NORM

Who is this course for?

Personnel who require an awareness of scaffolding operations.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course will provide you with a brief overview of scaffolding safety.

How will this course benefit my company?

By ensuring personnel have an overview of the requirements for the safe use of scaffolding during operations.

What standards are referred to in this course?

This course does not refer to specific legislation or standards.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Accreditation:

This course is approved by the Institution of Occupational Safety and Health (IOSH).

IOSH is the world’s Chartered body for safety and health professionals. 

What that means:

We are the largest membership body for health and safety professionals.

We champion occupational safety and health causes and advocate for change.

We advise governments, NGOs and policymakers.

We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

We commission research and set national and international standards.

We shape the future of the profession.

Who is this course for?
Newcomers to the Oil and Gas Industry

Is previous experience required?
You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?
This course aims to provide a brief overview of fire and safety systems

How will this course benefit my company?
By ensuring you have a brief overview of fire and safety systems.

What standards are referred to in this course?
Health and Safety at Work Act
The Management of Health and Safety at Work Regulations
The Regulatory Reform (Fire Safety) Order
The Fire (Scotland) Act

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Personnel requiring an awareness or understanding of US scaffolding safety.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to ensure that relevant personnel in the US have a common and consistent understanding of scaffolding safety.

How will this course benefit my company?

By ensuring you have a common and consistent approach to company and industry best practice in relation to US scaffolding safety.

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course Goal: 

This course provides learners with an awareness of US best practice in relation to working at height and fall protection.

Learning Objectives:

LO1 Identify when fall protection is required

LO2 Identify the legislative and regulatory requirements for fall protection that help to control work at height

LO3 Explain the duties that are placed on employers and employees

LO4 Describe the hazards involved in working at height

LO5 Explain the importance of planning and risk assessment

LO6 Describe the hierarchy of control for managing and selecting fall protection equipment 

LO7 Identify the factors that should be considered when assessing fall protection methods

LO8 Describe the main methods of access for working at height and give examples of the different types of fall protection equipment

LO9 Describe the rules for working with ladders

LO10 Describe the rules for working with scaffolds

LO11 Explain the importance of inspecting equipment

LO12 Explain how to correctly use a safety harness

Who is this course for?

Personnel requiring an awareness or understanding of US respiritory protection and RPE.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to ensure that relevant personnel in the US have a common and consistent understanding of RPE.

How will this course benefit my company?

By ensuring you have a common and consistent approach to company and industry best practice in relation to US RPE.

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

All personnel involved in forklift activities.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide an overview of the hazards specific to forklift activities. 

How will this course benefit my company?

By ensuring you have an overview of the hazards specific to forklift activities. 

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course Goal:

This course aims to  provide learners with an overview of US best practice in relation to working with hand and power tools.

This course aims to provide an understanding of the potential hazards associated with the use of hand tools and power tools, as well as the safety precautions required to prevent those hazards from occurring.

Learning Objectives:

LO1 Identify the general hazards and control measures associated with hand and power tools

LO2 Identify specific hazards associated with hand tools

LO3 Give an overview of general power tool safety precautions

LO4 Explain how guards provide protection to operators

LO5 Give examples of tools that must be equipped with a momentary switch

LO6 Identify specific hazards and control measures related to the use of electric tools

LO7 Identify the proper procedures to follow when using a grinder

LO8 Identify specific hazards and control measures related to the use of pneumatic tools

LO9 Identify specific hazards and control measures related to the use of powder-actuated tools

LO10 Identify specific hazards and control measures related to the use of hydraulic jacks

Este curso está diseñado para brindarle al personal costa afuera un conocimiento general sobre los peligros y medidas de control que se relacionan con las áreas de trabajo de la instalación en las que puede estar presente el H2S.

• Comprender mejor los peligros que se relacionan con el H2S y las medidas necesarias de detección y protección que deben tenerse y cumplirse

• Identificar los niveles y límites de exposición laboral legales que se han establecido para su protección.

• Explicar las responsabilidades de los empleadores en lo que respecta a la gestión de riesgos asociados a la posible exposición al H2S en el lugar de trabajo.

• Explicar las tareas de los empleados respecto de cumplir con los procedimientos pertinentes sobre H2S y seguir las pautas que proporcionan los empleadores o propietarios de las instalaciones.

Course goal:

This course aims to provide learners with an awareness of US best practice in relation to managing slips, trips and falls in the workplace.

Learning Objectives:

LO1   Outline the extent of the problem of slips, trips and falls at work

LO2   Identify the causes of slips, trips and falls

LO3   Explain the duties of employers in preventing slips, trips and falls in the workplace

LO4   Explain the hierarchy of controls in preventing and reducing, the risk of slips, trips and falls 

LO5   Explain the actions that can be taken to prevent and reduce the risk of slips, trips and falls

LO6   Explain the requirements for the use of fall protection

LO7   Explain the responsibilities of employees in preventing slips, trips and falls

Who is this course for?

Personnel requiring an awareness or understanding of common handling and storage methods for chemicals.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide an overview of the requirements for the handling and storage of hazardous substances

How will this course benefit my company?

By ensuring you have an overview of the requirements for the handling and storage of hazardous substances

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%. 

Who is the course for?

This eLearning course is aimed at individuals who work offshore, in any role, anywhere in the world.

Is previous experience required?

The course is designed for existing workers in the oil and gas industry. Completion of this course awards an IMIST certificate valid for four years, after which you will need to sit the course again to refresh your knowledge and earn a new certificate.

How will the course benefit me?

The offshore working environment is home to many hazards, which means that it is vital for everyone who goes offshore to have the same baseline level of safety knowledge. This course has been created with OPITO to set a global safety standard by applying a consistent level of safety awareness across nine safety critical areas and is applicable .

The knowledge gained in this course will help you to stay safe in your day-to-day activities offshore. It will also outline some of the systems and procedures in place to manage everyday operations offshore.

How will the course benefit my company?

By ensuring that your safety knowledge is at or above the baseline level, your company can rest assured that you are able to work offshore safety and in compliance with regulations and company procedures. Increased safety knowledge helps to prevent incidents and makes your working environment a safer place.

What standards are referenced in the course?

This course is written based on the OPITO standard International Minimum Industry Safety Training Standard (IMIST) (5312). As a global standard, the course is not written to meet any specific regional legislation but references industry best practices and standard operating procedures throughout.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 100%. 

The course starts with an optional pre-assessment that checks your existing knowledge of the course topics. The course will restructure so that it only contains the content needed to address the gaps in your knowledge.

Please find pre-course information and learning outcomes here: 

https://mintra.com/implementing-maintaining-opito-standards-policy

Course goal:

This course aims to provide learners with an awareness of US best practice in relation to manual handling activities.

To increase learners’ awareness of the importance of safe manual handling operations and the risks involved with manual handling. The course also aims to give an overview of the OSHA requirements for the correct handling techniques for safe lifting, and for the pushing and pulling of loads.

Learning Objectives

 LO1 Define the term ‘manual handling’ and explain the importance of safe manual handling operations 

LO2 Identify the types of injuries that may result from improper manual handling operations 

LO3 Identify safe work practices in relation to manual handling operations

LO4 Describe the duties that are placed on employers and individual personnel in relation to manual handling operations

LO5 Explain the importance of risk assessing manual handling operations 

LO6 Identify the factors to consider when assessing manual handling operations and identify ways of reducing the risks of injury 

LO7 Describe good handling techniques for safe lifting

LO8 Describe good handling techniques for pushing and pulling loads

LO9 Explain the training requirements associated with manual handling operations

This course was first developed in 2014 by the laboratory company Kystlab AS, which was our company name back then. The scaling and development of our company have included both mergers and shareholder changes, and our name is now Nemko Norlab AS – a part of renowned Nemko Group. We are still the largest, Norwegian owned laboratory company, and “Clean water offshore” is still based on our company´s year-long experience with water laboratory analysis, including potable water offshore. In Nemko Norlab the scientific know-how is further strengthened, and the service portfolio to the offshore segment expanded significantly. All together we now conduct over 100.000 routine analyses annually related to drinking water.

New in the 5th Edition

- As with the Covid-19 virus, the focus on the lethal shower microbe Legionella is increasing offshore due to the risk of disease outbreak. The training course has therefore been further strengthened to prevent Legionella disease.

- The course is also updated according to new recommendations for the annual sampling program, changes that potentially will lower analysis costs.

- This edition has also been updated in accordance with current regulations, including an important change in authority responsibility. The Institute of Public Health is no longer responsible for anything offshore.

General course info

 - The course is well illustrated to provide the best possible understanding and interpretation of the comprehensive regulations.

- There are intuitive and useful exercises throughout the course. The course is available in both Norwegian and English.

- Based on «Safe, Sufficient and Good Potable Water Offshore», the course highlights situations the participant typically may encounter in everyday work.

For more info:

- Contact your Mintra Key Account Manager to order course licenses.

- Contact anne.kristin.gussias@nemkonorlab.com for professional inquiries.

Please note: this course is also available in an Norwegian-language version.

The course is delivered by the accredited laboratory NEMCO NORLAB AS. 

Who is this course for?

All personnel involved in warehouse safety operations in the workplace.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to identify the hazards specific to warehousing and provide advice on how to avoid these hazards.

How will this course benefit my company?

By ensuring you are able to identify the hazards specific to warehousing and provide advice on how to avoid these hazards.

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?
This Personnel Transfer & Evacuation (US) course is suitable for all relevant offshore personnel.

Is previous experience required?
You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role.

How will this course benefit me?
This course aims to provide an overview of US best practice in relation to the transfer and evacuation of personnel. This course in Personnel transfer and evacuation is divided into and covers the following topics: Pre transport offshore, vessel transport offshore, helicopter transport offshore and evacuation offshore.

How will this course benefit my company?

By ensuring you are aware of the US best practice in relation to the transfer and evacuation of personnel.

What standards are referred to in this course?
N/A

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is the course for?

This course aims to provide an overview of the requirements for the safe handling of radioactive materials for personnel who work closely with it.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course provides learners with an awareness of the risks involved in working with radioactive materials.

How will the course benefit my company?

The course will benefit companies by ensuring that personnel understand the risks of working with radioactive materials and how to mitigate these risks.

What standards are referenced in the course?

No standards or regulations are referenced in this course.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.