Oil and Gas

Course catalogue

hits
448
Course code: MUK-167
Course type: E-learning course
Duration: 1 hour 30 minutes
Language: English

Who is this course for?

Personnel requiring an awareness or understanding of drilling technology.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

 

How will this course benefit me?

This course aims to provide learners with an introduction to the Oil and Gas Industry and the different stages required for extracting and producing hydrocarbons.

 

How will this course benefit my company?

By ensuring you have an introduction to the Oil and Gas Industry and the different stages required for extracting and producing hydrocarbons.

 

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MUK-006-FT
Course type: E-learning course
Duration: N/A
Language: English

FAST TRACK is a learning method which provides you with bespoke learning content by identifying any knowledge gaps you may have in a particular subject area.

FAST TRACK is a pre-assessment learning tool which is designed to assess your existing knowledge of a particular subject area. The pre-assessment uses a pool of questions to test your current knowledge. The results of this assessment help identify your personal knowledge gaps. FAST TRACK then automatically creates a bespoke course to address these knowledge gaps.


Course goal: To increase learners’ awareness of the importance of safe manual handling operations and the risks involved with manual handling. The course also aims to outline best practice for the correct handling techniques for safe lifting, and for the pushing and pulling of loads.

This course covers the following learning objectives:

LO1 Define the term ‘manual handling’ and explain the importance of safe manual handling operations

LO2 Identify the types of injuries that may result from manual handling operations

LO3 Identify the legislation that is in place to regulate manual handling operations

LO4 Describe the duties that are placed on employers and employees by the Manual Handling Operations Regulations

LO5 Explain the importance of risk assessing manual handling operations

LO6 Identify the factors to consider when assessing manual handling operations and identify ways of reducing the risks of injury

LO7 Describe good handling techniques for safe lifting and the importance of working within the HSE manual handling risk assessment guidelines

LO8 Describe good handling techniques for pushing and pulling loads

LO9 Explain the training requirements associated with manual handling operations

Course code: MTP-073
Course type: E-learning course
Duration: 30 Minutes
Language: English (US)

This course aims to provide learners with an awareness of US best practice in relation to the values that govern responsible corporate practice and personal behaviors in the workplace.

The Code of Conduct course provides an overview of the common values that govern responsible corporate practice and personal behaviour in a company. The course will identify the responsibilities of employees and our common responsibilities toward each other in the workplace. You will learn about applicable laws on human rights, equality, discrimination and corruption. During the course, you will be asked to make your own decisions in relevant dilemmas involving sexual harassment, bullying, discrimination and corruption.

Course code: MUK-021
Course type: E-learning course
Duration: 30 minutes
Language: French (Subtitles)

À l'issue de ce cours, vous devriez pouvoir :

• Expliquer l'importance de l'identification des dangers

• Donner des exemples de dangers industriels courants

• Identifier les dangers inhérents au lieu de travail, et

• Comprendre l'importance des mesures de contrôle dans la limitation des risques provenant de dangers

Course code: MUK-064
Course type: E-learning course
Duration: 30 minutes
Language: English

Who is this course for?

Personnel who require awareness and understanding of the hazards and controls of common compressed air uses.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

 

How will this course benefit me?

This course aims to encourage the safe use of compressed air and describes the ways in which compressed air can be dangerous as well as how to minimise the risks of such dangers occurring

 

How will this course benefit my company?

By ensuring you are introducted  to safe use of compressed air and describes the ways in which compressed air can be dangerous as well as how to minimise the risks of such dangers occurring

 

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MUK-003-FT
Course type: E-learning course
Duration: N/A
Language: English

FAST TRACK is a learning method which provides you with bespoke learning content by identifying any knowledge gaps you may have in a particular subject area.

 

FAST TRACK is a pre-assessment learning tool which is designed to assess your existing knowledge of a particular subject area. The pre-assessment uses a pool of questions to test your current knowledge. The results of this assessment help identify your personal knowledge gaps. FAST TRACK then automatically creates a bespoke course to address these knowledge gaps.

 

This course covers the following learning objectives:

 

LO 1 Explain the physical properties and sources of H2S, and identify the areas on an offshore installation where you would expect to encounter H2S

LO 2 Explain the physiological effects of exposure to varying toxicity levels of H2S

LO 3 Explain the responsibilities and duties of all personnel and their duties under current legislation

LO 4 Explain the current legal occupational exposure limits for short and long term exposure periods relating to H2S

LO 5 Describe the various methods for detecting H2S

LO 6 Describe the various personal and respiratory protection equipment required for undertaking tasks in areas where H2S may be present

LO 7 Explain the hazardous area classifications which may be encountered on an offshore installation and the associated control measures required

LO 8 Explain the formal requirement for H2S contingency plans on installations

LO 9 Identify the different alarms encountered offshore and the emergency and evacuation procedures that should be followed

Course code: MUK-002-FT
Course type: E-learning course
Duration: N/A
Language: English

FAST TRACK is a learning method which provides you with bespoke learning content by identifying any knowledge gaps you may have in a particular subject area.

FAST TRACK is a pre-assessment learning tool which is designed to assess your existing knowledge of a particular subject area. The pre-assessment uses a pool of questions to test your current knowledge. The results of this assessment help identify your personal knowledge gaps. FAST TRACK then automatically creates a bespoke course to address these knowledge gaps.

Course goal: This course aims to increase learners’ awareness of the environmental aspects and impacts related to the Oil and Gas Industry and the actions that can be taken to minimise environmental damage


This course covers the following learning objectives:

LO1 Identify the main environmental issues that affect the Oil and Gas Industry

LO2 Explain the importance of being an environmentally responsible company

LO3 Explain the company’s commitment to managing environmental issues

LO4 Explain the role of ISO 14001 in environmental management

LO5 Define what is meant by environmental ‘aspects’ and ‘impacts’

LO6 Identify the activities that can contribute towards atmospheric pollution 

LO7 Identify the activities that can contribute towards water pollution

LO8 Identify typical spill sources

LO9 Describe the environmental effects of chemical discharges

LO10Identify the sources and impacts of disturbance of the seabed by the Oil and Gas Industry 

LO11 Identify the sources and impacts of noise from oil and gas operations 

LO12 Identify the activities that can generate waste

LO13 Describe ways in which the impact on the environment can be minimised

LO14 Explain that everyone has a role to play in protecting the environment

Course code: MUK-120
Course type: E-learning course
Duration: 90 minutes
Language: English

Who is this course for?
All personnel involved in rigging and lifting operations

Is previous experience required?
No previous experience is required to complete this course.

How will this course benefit me?
This course will provide you with an overview of rigging and lifting operations.

How will this course benefit my company?

This course will provide personnel with an overview of rigging and lifting operations.


What standards are referred to in this course?

• The Lifting Operations and Lifting Equipment Regulations (LOLER) 

• The Provision and Use of Work Equipment Regulations (PUWER) 

• The Safe Use of Lifting Equipment: Approved Code of Practice (ACOP)

• Lifting Equipment at Work Guidance

• The Personal Protective Equipment at Work Regulations

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MUK-238
Course type: E-learning course
Duration: 30 Minutes
Language: English (US)

Who is this course for?

Personnel at all levels of an organisation will benfit from this awareness course.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

 

How will this course benefit me?

This course aims to provide a brief overview of the Job Safety Analysis process. 

 

How will this course benefit my company?

By ensuring you have a brief overview of the Job Safety Analysis process. 

 

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: IN-08
Course type: E-learning course
Duration: 30 minutes
Language: English

Who is the course for?

This course is for any person who interacts with, or is responsible for, the specification, design, operation and maintenance of assets that employ safety instrumented systems.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course will provide you with an awareness of the purpose and nature of safety systems deployed to protect people, the environment and plant in the areas that you work.

How will the course benefit my company?

By ensuring personnel have an understanding of safety instrumented systems.

What standards are referenced in the course?

IEC 61508

IEC 61511

IEC 62061

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MUK-066
Course type: E-learning course
Duration: 20 minutes
Language: English

Who is this course for?

Personnel requiring awareness and understanding of the legislation for safe use of equipment in explosive atmospheres.

 

Is previous experience required?

No previous experience is required to complete this course.

 

How will this course benefit me?

This course aims to provide information on the European Directives that set the standard for equipment that is to be used in explosive atmospheres (ATEX).

 

How will this course benefit my company?

By ensuring you have information on the European Directives that set the standard for equipment that is to be used in explosive atmospheres (ATEX).

 

What standards are referred to in this course?

Dangerous Substances and Explosive Atmospheres Regulations of 2002 (DSEAR)

Directive 99/92/EC, (also known as 'ATEX 137' or the 'ATEX Workplace Directive')

Directive 94/9/EC, (also known as 'ATEX 95' or the ‘ATEX Equipment Directive')

Equipment and Protective Systems Intended for Use in Potentially Explosive Atmospheres Regulations of 1996

 

Is there an assessment?

Yes

Course code: MUK-008-FT
Course type: E-learning course
Duration: 45 minutes
Language: English

FAST TRACK is a learning method which provides you with bespoke learning content by identifying any knowledge gaps you may have in a particular subject area.

FAST TRACK is a pre-assessment learning tool which is designed to assess your existing knowledge of a particular subject area. The pre-assessment uses a pool of questions to test your current knowledge. The results of this assessment help identify your personal knowledge gaps. FAST TRACK then automatically creates a bespoke course to address these knowledge gaps.

This FAST TRACK course assesses the following Learning Objectives:

LO1 Outline the extent of the problem of slips, trips and falls at work
LO2 Identify the causes of slips, trips and falls
LO3 Identify the key pieces of legislation that are in place to reduce the risk of slips, trips and falls occurring
LO4 Explain the duties of employers in preventing slips, trips and falls in the workplace
LO5 Explain the hierarchy of controls in preventing, and reducing, the risk of slips
LO6 Explain the actions that can be taken to prevent and reduce the risk of trips
LO7 Explain the responsibilities of employees in preventing slips, trips and falls

Course code: MUK-111
Course type: E-learning course
Duration: 30 minutes
Language: English

Who is this course for?

Personnel requiring an awareness or understanding of the role of Banksmen and Slingers.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

 

How will this course benefit me?

This course aims to give an overview of the roles of the Banksman and Slinger

 

How will this course benefit my company?

To ensure you have an overview of the roles of the Banksman and Slinger

 

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MUK-060
Course type: E-learning course
Duration: 30 minutes
Language: English

Who is this course for?
Trainee Oil and Gas Operations Technicians / Deck Crew

Is previous experience required?
You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?
This course aims to provide an introduction to the use of storage tanks

How will this course benefit my company?
By ensuring you are introducted to the use of storage tanks

What standards are referred to in this course?
N/A

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MUK-232
Course type: E-learning course
Duration: 45 Minutes
Language: English (US)

Who is this course for?

All personnel who are involved in working with a Safety and Environmental Management System.

 

Is previous experience required?

No previous experience is required to complete this course.

 

How will this course benefit me?

This course aims to provide personnel with an understanding of the key elements of a Safety and Environmental Management System.

 

How will this course benefit my company?

The course will benefit companies by ensuring personnel with an understanding of the key elements of a Safety and Environmental Management System.

 

What standards are referred to in this course?

Bureau of Safety and Environmental Enforcement (BSEE)

American Petroleum Institute (API)

Environmental Management Program Offshore

Safety and Environmental Management System (SEMS)

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MUK-086
Course type: E-learning course
Duration: 3 hours
Language: English

Who is this course for?

All relevant personnel.

 

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role.

 

How will this course benefit me?

This course aims to provide an introduction to Gas Compression.

 

The course has seven modules:

Module 1: Introduction to Gas Compression

Module 2: Gas Compression Systems

Module 3: Gas Compressors and their Principles

Module 4: Gas Compressors and their Components

Module 5: Gas Compression Systems: Controlling Surge

Module 6: Gas Compression Systems: Start-up and Shutdown

Module 7: Gas Compression Systems: Innovation

 

How will this course benefit my company?

To ensure you have had an introduction to Gas Compression.

 

What standards are referred to in this course?

The course is made according to industry best practice.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.This course has seven modules:

Course code: MUK-010
Course type: E-learning course
Duration: 35 minutes
Language: French (Subtitles)

À l'issue de ce cours, vous devriez pouvoir :

• Identifier les risques inhérents à un travail en hauteur et expliquer l'importance de la planification et de la gestion des risques

• Identifier les exigences législatives et réglementaires qui aident au contrôle des travaux en hauteur

• Décrire les principales méthodes d'accès pour travailler en hauteur et les différents types d'équipement pour le travail en hauteur 

• Décrire la hiérarchie de contrôle pour la gestion et la sélection de l'équipement lié au travail en hauteur

• Expliquer comment utiliser  correctement un harnais de sécurité, et

• Décrire les règles pour travailler avec des échelles et des échafaudages ainsi que l'importance de l'inspection de l'équipement

Course code: MUK-068
Course type: E-learning course
Duration: 20 minutes
Language: English

Who is this course for?

For all personnel who are involved in working with gas turbines.

 

Is previous experience required?

No previous experience is required to complete this course.

 

How will this course benefit me?

This course aims to provide an introduction to gas turbines and how they are designed and operated.

 

How will this course benefit my company?

The course will benefit companies by ensuring that all relevant personnel have an understanding of gas turbines and how they are designed and operated.

 

What standards are referred to in this course?

No standards or regulations are referenced in this course.

 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course code: MUK-006
Course type: E-learning course
Duration: 30 minutes
Language: French (Subtitles)

Ce cours vise à vous permettre de :

• Définir le terme « manutention manuelle » et expliquer l'importance de la sécurisation des opérations de manutention manuelle 

• Identifier les types de blessures susceptibles de se produire par suite d’opérations de manutention manuelle 

• Identifier la législation mise en place pour réguler les opérations de manutention manuelle

• Décrire les responsabilités attribuées aux employeurs et aux employés par la législation sur les opérations de manutention manuelle

• Expliquer l'importance de l'évaluation des risques liés aux opérations de manutention manuelle 

• Identifier les facteurs à prendre en compte quand on évalue des opérations de manutention manuelle et identifier les manières de réduire les risques de blessure 

• Décrire les bonnes techniques de manutention pour un levage, une poussée et une traction des charges sûrs, et

• Expliquer les exigences en matière de formation associées aux opérations de manutention manuelle

Course code: MUK-015-FT
Course type: E-learning course
Duration: N/A
Language: English

FAST TRACK is a learning method which provides you with bespoke learning content by identifying any knowledge gaps you may have in a particular subject area.

FAST TRACK is a pre-assessment learning tool which is designed to assess your existing knowledge of a particular subject area. The pre-assessment uses a pool of questions to test your current knowledge. The results of this assessment help identify your personal knowledge gaps. FAST TRACK then automatically creates a bespoke course to address these knowledge gaps.

This FAST TRACK course assesses the following Learning Objectives:

LO1 Define what is meant by Personal Protective Equipment (PPE)
LO2 Identify the different types of PPE
LO3 Identify the legal duties and obligations surrounding PPE
LO4 Describe the Hierarchy of Control measures and the use of PPE in relation to this
LO5 Explain the requirement for assessing the suitability and compatibility of PPE
LO6 Explain the maintenance requirements for PPE
LO7 Describe the duties and responsibilities of employees in relation to PPE
LO8 Explain the importance of PPE-related training, information and instruction

Hits per page
| 1 ... 7 ... |