Course catalogue

Who is this course for?

Personnel responsible for cooking, preparing or handing food and others working in the kitchen/galley/dining areas.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course will provide you with an introduction to industry best practice in relation to food safety, health and hygiene.

How will this course benefit my company?

This course will provide personnel with an introduction to industry best practice in relation food safety, health and hygiene and help reinforce the importance of good food safety practices in the workplace.

What standards are referred to in this course?

This course does not refer to specific legislation or standards.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is the course for?

Personnel who require an awareness of the hazards of working in cold climates

Is previous experience required?

Previous experience is not required to complete this course.

How will the course benefit me?

This course will identify the clothing and Personal Protective Equipment that should be used when working in cold climates.

How will the course benefit my company?

By providing your personnel with an understanding of the hazards of working in cold climates and the clothing and Personal Protective Equipment that should be worn to protect themselves from the elements.

What standards are referenced in the course?

This course does not refer to specific legislation or standards.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is the course for?

Maritime personnel, onshore and offshore

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will the course benefit me?

The course looks at the purpose of the ISM code which is to maintain safety in international shipping, reduce pollution from vessels, protect the exterior environment and prevent injury or loss of human life.

How will the course benefit my company?

By ensuring you have the knowledge of the purpose of the ISM code.

What standards are referenced in the course?

ISM code

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is the course for?

All personnel involved in carrying out tasks under a Permit to Work system and those responsible for the Control of Work.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course will provide learners with an overview of the requirements and operation of a typical Permit to Work system

How will the course benefit my company?

By ensuring that personnel are familiar with the requirements and operation of a typical Permit to Work system.

What standards are referenced in the course?

The International Maritime Organization (IMO)

Health and Safety at Work Act

Is there an assessment? 

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is the course for?

All Maritime personnel who work with hand and power tools.

Is previous experience required?

No prior knowledge or experience is required to complete this course.

How will the course benefit me?

This course will provide knowledge on hand and power tool safety.

How will the course benefit my company?

This course is intended to help prevent lost time accidents.

What standards are referenced in the course?

There are no regulations or standards referenced in this course.

Is there an assessment? 

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

This course aims to provide learners with an overview of industry best practice in relation to confined space entry work.

Learning Objectives

- LO1 Explain what is meant by a Confined Space
- LO2 Give examples of Confined Spaces
- LO3 Describe the dangers that can be caused by confined space entry work
- LO4 Identify the legal requirements associated with confined space entry work
- LO5 Explain how to avoid entering confined spaces
- LO6 Explain the importance of having a Safe System of Work in place
- LO7 Describe individual roles and responsibilities involved in Confined Space Entry work
- LO8 Explain the requirements for gas testing
- LO9 Identify acceptable levels for atmospheric test results
- LO10 Give examples of Confined Space Entry site safety equipment
- LO11 Explain the actions to take in an emergency situation
- LO12 Explain Confined Space Entry alarm procedures

Who is the course for?

Any personnel operating galley equipment, such as Cooks or Stewards.

Is previous experience required?

No previous experience is required.

How will the course benefit me?

By providing you with clear guidance for the safe operation of galley equipment to minimise the chance of injury or damage.

How will the course benefit my company?

By minimising the risk for galley equipment related accidents and increasing the safety of a crucial part of each vessel.

What standards are referenced in the course?

International Convention for the Prevention of Pollution from Ships (MARPOL)

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is this course for:
Maritime personnel, onshore and offshore.

Is previous experience required?
You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role.

How will this course benefit me?
The course looks at the purpose of the ISM Code, which is to maintain safety in international shipping, reduce pollution from vessels, protect the exterior environment and prevent injury or loss of human life.

How will this course benefit my company?

By ensuring you have the knowledge of the purpose of the ISM Code.

What standards are referred to in this course?

The International Convention for the Safety of Life at Sea (SOLAS)

The International Ship and Port Facility Security (ISPS) Code 

The International Convention on Standards of Training, Certification and Watchkeeping for Seafarers (STCW)

The International Safety Management (ISM) Code 

The International Convention for the Prevention of Pollution from Ships (MARPOL)

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is the course for?

Any personnel with a desire to improve their ability to establish and maintain high performance standards onboard.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

Assertiveness involves speaking up, challenging others by asking thoughtful questions and taking initiatives when working with others. It constitutes of a confident and self-assured attitude and behavior. This course presents the perfect opportunity for you as a seafarer to be proactive and showcase that you are ready to meet the industry's modern-day demands.

How will the course benefit my company?

Employers are now incorporating seafarer’s soft skills into their crewing decisions. The soft, ‘non-technical skills’ are increasingly important on board due to the rapidly changing workforce and automation of technical tasks. Additionally, maritime accident investigations indicate that a lack of soft skills and human error is the most common reason behind accidents at sea.

What standards are referenced in the course?

This course does not refer to specific legislation or standards.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is this course for?
All personnel who are at risk for being exposed to benzene.

Is previous experience required?
You do not need prior knowledge or experience to complete this course.

How will this course benefit me?
This course aims to provide learners with an awareness of benzene and provide best practice for work with benzene in oil and gas producing facilities.

How will this course benefit my company?
By ensuring you are aware of the impacts of benzene and familiar with best practice for work with benzene.

What standards are referred to in this course?
Norwegian Oil&Gas circulars NOG 130, 131&133
SOLAS - II/2/16.3.2
IMO circulars 1095 and 1220

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?
Company Security Officer (CSO), Ship Security Officer (SSO), Ship's Master and Officers, Deck and Engine Ratings, Galley and Catering Staff, Office Operations Staff

Is previous experience required?
You do not need prior knowledge or experience to complete this course.

How will this course benefit me?
Awareness of Best Management Practices to assist companies and ships in deterring and responding to piracy attacks and armed robbery.

How will this course benefit my company?
By ensuring you are aware of best practices in deterring and responding to piracy attacks and armed robbery.

What standards are referred to in this course?
N/A

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is this course for?

This FSE High and Low Voltage Training course is suitable for everyone working on low and high voltage installations.

Is previous experience required?

You do not need prior knowledge or experience to complete this course, but it is assumed that you are competent in your designated role.

How will this course benefit me?

The course meets the requirements set in Section 7 of the ‘Safety Regulations for Work and Operation of Electrical Equipment and Installations – FSE’ which is that all relevant personnel undertake annual training and instruction in FSE. The course also provides the necessary training and instruction in first aid, focusing on electrical injuries, with the exception of the mandatory practical training in cardiopulmonary resuscitation (CPR).

The regulations of various authorities make FSE applicable to all those working with electricity, whether on board ship, on platforms or on land. This course is suitable for all, regardless of which industry you work in.

The authorities require that training in FSE and first aid in the event of electrical accidents is undertaken at least once a year. No more than 12 months shall elapse between training courses.

How will this course benefit my company?

By ensuring you have the knowledge and competence to be working on low and high voltage installations.

What standards are referred to in this course?

• Section 7 of the ‘Safety Regulations for Work and Operation of Electrical Equipment and Installations – FSE’

• The European standard

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is the course for?

All Maritime personnel.

Is previous experience required?

No prior knowledge or experience is required to complete this course.

How will the course benefit me?

To provide knowledge of Portable Fire Extinguishers

How will the course benefit my company?

To aid in the reduction of fire incidents on vessels.

What standards are referenced in the course?

International Code for Fire Safety Systems (FSS Code)

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is this course for?

This course is aimed towards all personnel who use abrasive wheels in the workplace.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course aims to provide all relevant personnel with the knowledge required to understand the hazards and controls associated with the use of abrasive wheels.

How will this course benefit my company?

The course will benefit companies by providing personnel with knowledge of how to avoid risks and hazards when using abrasive wheels, subsequently reducing accidents and injuries in the workplace.

What standards are referred to in this course? 

• Provision and Use of Work Equipment Regulations (PUWER) 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is the course for?

Junior Officers and crew who are involved in tanker operations on board, to further their understanding of operating procedures, safety and associated documentation and/or checklists.

Is previous experience required?

This course requires no previous experience to complete.

How will the course benefit me?

This course will give learners an awareness of the safety considerations for tanker operations.

How will the course benefit my company?

The course will ensure that learners are following best practice as detailed in national and international legislation as well as company procedures.

What standards are referenced in the course?

• The International Safety Management (ISM) Code

• The Oil Companies International Marine Forum (OCIMF)

• The International Convention for the Prevention of Pollution from Ships (MARPOL)

• The Oil Pollution Act 1990 (OPA90) for operating in US waters

• International Convention on Standards of Training, Certification and Watchkeeping for Seafarers (STCW)

• International Safety Guide for Oil Tankers and Terminals (ISGOTT)

• The International Convention for the Safety of Life at Sea (SOLAS)

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is this course for?

Personnel requiring an awareness or understanding of the change management process.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide an overview of management of change. The course focuses on the steps of the management of change process, the roles and responsibilities of personnel, and the risks involved in change management and their associated control measures.

How will this course benefit my company?

By ensuring you have an overview of the management of change process.

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is the course for?

All personnel involved in lifting operations.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course will provide you with an overview of the Banksman and Slinger roles, and how to carry out lifting operations safely.

How will the course benefit my company?

This course will provide personnel with an overview of the Banksman and Slinger roles, to help ensure that lifting operations are carried out safely.

What standards are referenced in the course?

This course does not refer to specific legislation or standards.

Is there an assessment? 

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is this course for?

Any person conducting an in-service assessment of the competence of an on-oboard candidate.

Is previous experience required?

You do not need prior knowledge or experience to complete this course. 

How will this course benefit me?

The aim of this course is to enable you as an on-board assessor to supervise the training and monitor the competence of seafarers. A seafarer's competence must meet the standards of the STCW Code.

This course is approved by  the Norwegian Maritime Authority (NMA) on behalf of IMO.

This course will be a part of a blended learning in two stages:

- The first stage is this e-learning course

- The second stage will be the on-board workbook

The training will be complete when all the elements of the checklist pertaining to your on-board assessor

How will this course benefit my company?

By ensuring you are qualified and certified as an Onboard Assessor. 

What standards are referred to in this course?

STCW Onboard Assessor (A-I/6)

This course is approved by the Norwegian maritime Authority (NMA)

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

This course is a combined training consisting of: Elearning and onboard training (exercises and checklists).

Who is the course for?

Personnel responsible for cooking, preparing or handling food and others working in the kitchen/galley/dining areas.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course will provide you with an introduction to industry best practice in relation to food safety, health and hygiene.

How will the course benefit my company?

This course will provide personnel with an introduction to industry best practice in relation food safety, health and hygiene and help reinforce the importance of good food safety practices in the workplace.

What standards are referenced in the course?

This course does not refer to specific legislation or standards.

Is there an assessment? 

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is the course for?

All personnel on board.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course will provide learners with awareness on how to prepare for heavy weather and protect the safety of the ship and all personnel on board.

How will the course benefit my company?

The course will ensure that learners are following best practice as detailed in national and international legislation, as well as their company procedures.

What standards are referenced in the course?

International Safety Management (ISM) Code

Cargo Securing Manual (CSM)

Code of Safe Working Practices (CoSWP)

The ICS Bridge Procedures Guide

Safety of Life at Sea Convention (SOLAS)

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.