Course catalogue

Who is this course for?
All well intervention personnel working with tools where explosives are an integrated part of the operation

Is previous experience required?
You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?
This course aims to give learners an introduction to explosives used in well intervention operations

How will this course benefit my company?
By ensuring you have an introduction to explosives used in well intervention operations

What standards are referred to in this course?
N/A

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Hensikten med kurset er å gi blivende kranførere god teoretisk og praktisk grunnopplæring på fastmonterte hydrauliske kraner. Kurset gir elevene god innsikt i prinsippene for kranens konstruksjon og virkemåte. Etter endt kurs med bestått teoretisk prøve vil denne sammen med bestått praktisk kjøreprøve være grunnlaget for utstedelse av kranførerbevis G20 Fastmontert hydrauliske kraner.

Opplæringen dekker kompetansekrav i NORSOK standard R003N for Kranfører G20. 

Kursinnhold
- Innledning
- Konstruksjon
- Hydraulikk
- Mekanikk
- Lover / forskrifter / standarder
- Ståltau / vinsj / blokker
- Dokumentasjon
- Sikkerhetsbestemmelser
- Løfteredskap
- Øvingsoppgaver
- Eksamen

This course is only available in Norwegian.

Who is this course for?

Personnel requiring an awareness or understanding of asset stability.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide learners with a basic understanding of the principles of asset stability.

This course consists of following sections:

Section One: ‘An Introduction to Asset Stability’

Section Two: ‘Understanding the Curve of Statical Stability (GZ Curve)’

Section Three: ‘Free Surface Effect’

Section Four: ‘Stability Criteria and Regulations’

Section Five: ‘Structural Strength’

How will this course benefit my company?

By ensuring you have a basic understanding of the principles of asset stability.

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

An important part of Hytorc Norway's overall concept is courses and training in working on flanges and bolted connections. We have been involved in the development of courses since OLF started its Gas Leakage Project in 2003 and up to today's requirements which are in accordance with NS-EN 1591-4.

The timetable covers the following tables in
NS EN 1591-4: 2013: 1, 2, 3, 6, 7 and 8.

Who is this course for:
Anyone wanting to take the SRC/VHR-exam.

Is previous experience required?
You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?
To use VHF you must have a VHF / SRC certificate. With this course you will learn the whole curriculum in a simple and easily understandable way.

How will this course benefit my company?
By ensuring you have the competence to use VHF.

What standards are referred to in this course?
Lovdata - www.lovdata.no
Petroleum Safety Authority - www.psa.no

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Requirements for training related to scaffolding are regulated by law and regulations. This course is based on the requirements of Regulations concerning the Performance of Work, Chapter 17, which is about assembly, dismantling and alteration of scaffolding.

-2-5 meters: 7.5 hours theory and  7.5 hours practical training
-5-9 meters: 15 hours theory and 15 hours practical training
-Over 9 meters: 36 hours theory and 72 hours practical training

This course covers the requirements of theoretical training for scaffolding up to 9 meters, and corresponds to the requirements of the Regulations concerning the Performance of Work, Section 17-2 and 17-3, on theoretical training. There is an additional requirement of 15 hours practical training if 5-9 meters. 

Course content:
-What is scaffolding
-Scaffolding and safety
-Risk assessment
-Forces and counter forces
-Structure of a scaffold
-Wind forces
-How to prevent accidents
-Mobile scaffold towers
-Haki scaffolding systems

Dersom du har gjennomført stillasopplæring (teorikurs) - og kan dokumentere nødvendig praksis i henhold til kravene i forskrift om utførelse av arbeid §§17-2, 17-3 og 17-4 - kan du bestille stillasbevis.

Klikk her for informasjon: https://www.eba.no/stillasbevis/

The object of this course is to help course participants maintain and develop their knowledge, skills and attitudes regarding their role in an emergency response situation.

The course is in accordance with the Norwegian oil and gas training curricula - courses in valve technology.  The course is a combination of theory and practical application and concludes with a web-based exam, which takes about 2 hours to complete.

This training will help participants make their daily work with valves simpler and safer.
 
Course Content
- Operate different valve types optimally
- See the difference between the different types of valves
- See if valves are functioning properly
- Test valves
- Perform 1st line maintenance
- Ensure that valves are and remain atmospherically sealed
- Dismantle and install valves on the line

Hovedmål med kurset er å gi personer som skal utøve rollene som signalgiver, anhuker, dekksoperatør, boredekksarbeider, rigger og operatør av løfteinnretning opplæring i vurdering og forståelse av farer samt sikker bruk, vedlikehold, daglig kontroll og kasseringsregler for ulike typer løfteredskap. Anhuker og signalgiver skal samhandle og kommunisere med operatør av løfteinnretning i enhver løfteoperasjon på en slik måte at uønskede hendelser unngås.

Kursinnhold
- Innledning
- Lover, forskrifter og standarder
- Personlig verneutstyr og farlig gods
- Krav til signaldgiver og anhuker
- Planlegge, gjennomføre og evaluere
- Oppbevaring, bruk og kontroll av løfteredskaper
- Sikkerhet for personell
- Kritiske løfteoperasjoner
- Løftetabeller
- Praktisk bruk løfteredskaper
- Evaluering og avsluttende prøve

Modul 1.1 (8 timer) Arbeidsmiljø, ansvar og konsekvenser 

Modul 2.3 (16 timer) G11- Løfteredskap 

This course is only available in Norwegian.

Presentation

This training course provides a general introduction to the corrosion process, the protective coating used to prevent corrosion, the coating process and coating inspection.

Objectives

On completion of the training, students will be able to:

Know the different types of corrosion and their causes.

Understand the corrosion phenomenon and the threat it represents to the structural integrity.

Know the protective coating systems used in shipbuilding.

Be familiar with the constituents, structure and curing prerequisites of the protective coating systems.

Understand the different phases of the coating process and the requirements for successful coating application.

Be familiar with coating inspection procedures and the requirements of the IMO PSPC.

Recognise the different forms of coating failure.

Program

Module 1 - Introduction to Corrosion and Protective Coatings

Corrosion definition

Causes of corrosion

Different forms of corrosion

Corrosion rate

Protective coating systems

Paint coating components

Types of coatings

Technical data sheets

Coating cure

Module 2 - Coating Process and Inspection

Coating process scheme

Surface preparation

Cleaning techniques

Surface preparation

Paint application

Coating durability requirements

Coating inspection

Coating system documentation

Coating inspector qualifications

Inspection procedures and plan

Coating defects

Certificate

On completion of the training program, the student will be awarded the following qualifications:

Certificate of Corrosion and Coating awarded by Bureau Veritas Solutions Marine & Offshore.

The Certificate of Corrosion and Coating, issued by Bureau Veritas Solutions Marine & Offshore, is obtained after completing the course and passing the qualification examination.