Course catalogue

Who is this course for?

Personnel requiring awareness or understanding of SIRP.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

To ensure that relevant personnel have a common and consistent approach to industry best practice in relation to SIRP operations

How will this course benefit my company?

By ensuring you have an overview of industry best practice in relation to SIRP operations

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is the course for?

Officers and Crew.

Is previous experience required?

No, but basic maritime engineering knowledge is recommended.

How will the course benefit me?

This course is designed to provide you an understanding of the operation and use of an exhaust gas cleaning system (Scrubbers).

How will the course benefit my company?

The course will provide the learners with basic knowledge about scrubbers and scrubber operations.

What standards are referenced in the course?

• MARPOL Annex VI

• OCIMF guide for Implementation of Sulphur Oxide Exhaust Gas Cleaning Systems

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is the course for?

All personnel who may have to carry out manual handling duties.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course will provide learners with information to help reduce the risk of injury due to incorrect manual handling.

How will the course benefit my company?

By reducing lost time due to injury as a result of poor manual handling techniques.

What standards are referenced in the course?

• International Labour Organisation

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is this course for?

All personnel working with electricity in the Oil and Gas Industry.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course aims to provide all relevant personnel with a broad overview of common Electrical Safety Rules, and outlines best practice when working with electricity.

How will this course benefit my company?

By ensuring you have the knowledge of common Electrical Safety Rules, and the best practice when working with electricity, to reduce risk and injury at work.

What standards are referred to in this course?

• Health and Safety at Work Act

• Electricity at Work Regulations

• Management of Health and Safety at Work Regulations

• Electricity at Work Safe Working Practices

• Offshore Electricity and Noise Regulations

• Provision and Use of Work Equipment Regulations

• BS 7671: 2018 Requirements for Electrical Installations

• Offshore Installations (Safety Case) Regulations

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course goal: This course aims to introduce, develop and increase learners’ knowledge and awareness of the importance of Risk Assessment and how it can reduce the likelihood of accidents in the workplace. 

Learning Objectives

LO1  Explain the principles of, and steps involved in, the Risk Assessment process

LO2  Explain that employers have a responsibility for completing Risk Assessments and that employees have a duty to follow Risk Assessment outcomes 

LO3  Identify a typical Risk Assessment form    

LO4  Explain the requirements of the Risk Assessment team 

LO5  Recognise and explain Risk Assessment terminology

LO6  Identify the different steps within the Risk Assessment process 

LO7  Identify common, industry-specific hazards

LO8  Determine the appropriate level of Risk Assessment that may be required

LO9  Explain how to use a Risk Matrix to evaluate the level of risk

LO10  Explain how to identify appropriate control measures based on the Hierarchy of Control

LO11  Explain what is meant by ‘Initial Risk’ and ‘Residual Risk’

LO12  Describe what to do if any Residual Risk remains too high

LO13  Explain how to carry out a Personal Risk Assessment and recognise its importance before each task 

LO14  Explain the importance of Dynamic Risk Assessment  

LO15  Identify situations where ‘Stopping the Job’ may apply

LO16  Explain the importance of communicating the outcomes of a Risk Assessment  

LO17  Understand the importance of communicating ‘Lessons Learned’

Who is the course for?

Chief, Deck and Engine Officers

New departmental staff, crew members (both offshore and onshore)

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course will give you an overview of cargo operations and procedures for cargo handling and precautions at tanker and terminal.

How will the course benefit my company?

Raising awareness of precautions at tanker and terminal and providing the crew with clear procedures for cargo handling can reduce the risk of unwanted tanker operation incidents.

What standards are referenced in the course?

STCW 78 AND 1995 revised

MCA 2006

IMO / ISGOTT / COSWP

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Course goal: This course aims to increase learners’ awareness of the importance of Personal Protective Equipment (PPE), and outline the legal duties and responsibilities of employers and employees in relation to PPE.

Learning Objectives

LO1 Define what is meant by Personal Protective Equipment (PPE)

LO2 Identify the different types of PPE 

LO3 Identify typical regulatory requirements associated with PPE

LO4 Describe the Hierarchy of Control measures and the use of PPE in relation to this

LO5 Explain the requirement for assessing the suitability and compatibility of PPE

LO6 Explain the maintenance requirements for PPE

LO7 Describe the duties and responsibilities of employees in relation to PPE

LO8 Explain the importance of PPE-related training, information and instruction

Who is the course for?

Junior Engineers and Electro-tech Officers, Engineering and Electrical Ratings, Engineering and Electrical cadets.

Is previous experience required?

Basic maritime electrical engineering knowledge is recommended.

How will the course benefit me?

The course is designed to enable you to understand the basics around auxiliary generators and their uses.

How will the course benefit my company?

The course will provide the learners with basic knowledge about auxiliary generators and their uses.

What standards are referenced in the course?

IMO SOLAS 1974

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is this course for?

This eLearning course is aimed at individuals who are required to work with wells in the oil and gas industry.

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role.

How will this course benefit me?

This course aims to provide learners with an overview of well integrity and its importance in maintaining safe and secure operations.

This course contains the following sections:

Section 1: Well Integrity Overview

Section 2: Well Categorisation and Well Barriers

Section 3: Well Design and the Cementing Process

Section 4: Human Factors in Well Integrity

How will this course benefit my company?

To ensure you have an overview of well integrity and its importance in maintaining safe and secure operations.

What standards are referred to in this course?

This course is made according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is the course for?

All personnel involved in Marine maintenance activities.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course will provide information on how to reduce corrosion in the Maritime Industry.

How will the course benefit my company?

By reducing equipment failures due to corrosion.

What standards are referenced in the course?

No standards or regulations are referenced in this course.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is this course for?

Personnel who work with pressurised cylinders, compressed gas or associated equipment.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course aims to provide an overview of the use of pressurised cylinders, the risks involved and storage requirements.

How will this course benefit my company?

By ensuring you have an overview of the use of pressurised cylinders, the risks involved and storage requirements.

What standards are referred to in this course?

This course does not refer to specific legislation or standards.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Accreditation:

This course is approved by the Institution of Occupational Safety and Health (IOSH).

IOSH is the world’s Chartered body for safety and health professionals.

What that means:

We are the largest membership body for health and safety professionals.

We champion occupational safety and health causes and advocate for change.

We advise governments, NGOs and policymakers.

We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

We commission research and set national and international standards.

We shape the future of the profession.

Who is this course for?
Trainee Oil and Gas Operations Technicians / Deck Crew

Is previous experience required?
You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?
This course aims to provide an introduction to the use of storage tanks

How will this course benefit my company?
By ensuring you are introducted to the use of storage tanks

What standards are referred to in this course?
N/A

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is the course for?

All maritime personnel involved in the management of change process.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course will provide you with an overview of the management of change process.

How will the course benefit my company?

This course will provide personnel with an overview of the steps involved in the management of change process, the roles and responsibilities of personnel, the risks involved in change management and how these risks can be controlled.

What standards are referenced in the course?

This course does not refer to specific legislation or standards.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is the course for?

All relevant offshore personnel.

Is previous experience required? 

No previous experience is required to complete this course. 

How will the course benefit me?

This course aims to give offshore personnel the knowledge required to understand the hazards and controls associated with working in an environment where they could potentially be exposed to H2S.

How will the course benefit my company?

By ensuring you are aware of the hazards and controls associated with H2S exposure, which will in turn reduce incidents and accidents offshore.

What standards are referenced in the course?

• Control of Substances Hazardous to Health Regulations (COSHH)

• Health and Safety at Work Act

• Offshore Installations (Offshore Safety Directive)

• Offshore Installations (Safety Case)

• Offshore Installations (Prevention of Fire and Explosion, and Emergency Response) (PFEER)

• Offshore Installations and Wells (Design and Construction) Regulations

• EH40 Workplace Exposure Limits (WELs)

Is there an assessment? 

Yes - There is a course assessment with an 80% pass mark and 2 attempts. 

Learning objectives

- Identify the physical properties of H2S

- Recognise the physiological effects of exposure to varying toxicity levels of H2S

- Recognise the responsibilities and duties of all personnel and their duties under current legislation

- Recognise the current legal occupational exposure limits for short- and long-term exposure periods relating to H2S

- Identify the various methods for detecting H2S

- Identify the various personal and respiratory protection equipment required for undertaking tasks in areas where H2S may be present

- Recognise the hazardous area classifications which may be encountered on an offshore installation

- Identify the formal requirements for H2S contingency plans on installations

Who is the course for?

All personnel that come into contact with compressed air through maintenance or usage.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course aims to encourage the safe use of compressed air and describes the ways in which compressed air can be dangerous as well as how to minimise the risks of such dangers occurring.

How will the course benefit my company?

To reduce compressed air incidents and accidents.

What standards are referenced in the course?

No standard or regulations are referenced in this course

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is this course for?

All personnel involved in marine operations.

Is previous experience required?

No experience is required to take this course.

How will this course benefit me?

By ensuring you know how to respond to marine trash and debris incidents.

How will this course benefit my company?

By ensuring you know how to respond to marine trash and debris incidents.

What standards are referred to in this course?

US best practise.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Personnel requiring an awareness or understanding of US best practice for protecting hearing from noise hazards.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to ensure that relevant personnel in the US have a common and consistent understanding of noise hazards and their effects on you.

How will this course benefit my company?

By ensuring you have a common and consistent approach to company and industry best practice in relation to US specific ways to protect from noise hazards.

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Personnel who require knowledge or awareness of hydrates.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide awareness of how gas hydrates may be formed and the effects that they can have on pipeline flow assurance. The course examines what hydrates are, how they are formed and their molecular structure. It discusses flow assurance, details the risks of pipeline plugging by hydrates, and outlines the various methods of controlling hydrate formation.

How will this course benefit my company?

By ensuring you are aware of how gas hydrates may be formed and the effects that they can have on pipeline flow assurance.

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

All relevant personnel, including work party members, Performing Authorities and Area Authorities

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?

This course aims to provide the knowledge and techniques for carrying out effective toolbox talks

How will this course benefit my company?

By ensuring you have knowledge and know of techniques for carrying out effective toolbox talks

What standards are referred to in this course?

Control of Substances Hazardous to Health (COSHH) assessment

Safety Data Sheets (SDS)

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

All personnel who are involved in the transportation or supporting of a load by hand or bodily force.

Is previous experience required?

No previous experience is required to complete this course. 

How will this course benefit me?

To increase learners’ awareness of the importance of safe manual handling operations and the risks involved with manual handling.

How will this course benefit my company?

This course will benefit a company by reducing manual handling accidents.

What standards are referred to in this course?

No standards or regulations are referenced in this course.

Is there an assessment?

Yes

Who is this course for?

Personnel who require an awareness or understanding of the accident and incident investigation processes.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide learners with an overview of industry best practice in relation to accident and incident investigation

How will this course benefit my company?

By ensuring you have an overview of industry best practice in relation to accident and incident investigation

What standards are referred to in this course?

Reporting of Injuries

Diseases and Dangerous Occurrences Regulations (RIDDOR) 2013

HSG245, Management of Health and Safety at Work Regulations 1999

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is the course for?

Personnel who require an understanding of fire awareness as part of their role.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course aims to introduce, develop and increase learners’ knowledge and awareness of the importance of maintaining fire awareness and the actions to take in the event of an emergency.

How will the course benefit my company?

The course will benefit companies’ by helping to reduce fire related incidents by providing personnel with an awareness of actions to take in the event of an emergency.

What standards are referenced in the course?

Health and Safety at Work Act

The Management of Health and Safety at Work Regulations

The Regulatory Reform (Fire Safety) Order

The Fire (Scotland) Act

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Accreditation:

This course is approved by the Institution of Occupational Safety and Health (IOSH).

IOSH is the world’s Chartered body for safety and health professionals.

What that means:

We are the largest membership body for health and safety professionals.

We champion occupational safety and health causes and advocate for change.

We advise governments, NGOs and policymakers.

We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

We commission research and set national and international standards.

We shape the future of the profession.

Course goal: This course aims to provide the knowledge and techniques for carrying out gas testing.

This course contains the following sections:

Section 1: Introduction

Section 2: Hazards Associated with Gases and Vapours

Section 3: Flammable Atmospheres

Section 4: Fire and Explosions

Section 5: Toxic Atmospheres

Section 6: Oxygen Deficiency and Oxygen Enrichment

Section 7: The Hazards of Confined Spaces

Section 8: The Gas Monitor

Section 9: Using Gas Testing Equipment when Carrying out Fire Watch Duties

Section 10: Using the Gas Testing Equipment to Clear an Area Prior to Hot Work

Section 11: Using the Gas Testing Equipment to Identify a Potential Gas Leak

Section 12: Using the Gas Testing Equipment to Test the Atmosphere of a Confined Space Prior to Entry

Section 13: Using the Gas Testing Equipment during Purging Operations

Section 14: Final Assessment

Who is the course for?

All relevant personnel.

Is previous experience required?

No experience is required to complete this course.

How will the course benefit me?

This course aims to provide an overview of best practice in relation to drug and alcohol awareness in the workplace.

How will the course benefit my company?

This course provides drug and alcohol awareness, information on company abuse, illegal drug use, and the abuse of prescription drugs. 

What standards are referenced in the course?

N/A

Is there an assessment?

Yes

Learning Objectives:

• Identify various types of common drugs

• Find company policies on alcohol and controlled substances

• Explain the various methods of alcohol and drug testing

• Explain the consequences of violating company drug and alcohol use policies

• Describe the effects of alcohol and drugs on the body and job performance

Who is this course for?

Personnel requiring an awareness and understanding of common storage and handling methods for explosives.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide learners with an overview of the requirements for storing, transporting and handling explosives.

How will this course benefit my company?

By ensuring you have an overview of the requirements for storing, transporting and handling explosives.

What standards are referred to in this course?

Regulation 2 ER2014 

International Carriage of Dangerous Goods by Road (ADR)

United Nations Classification of Explosives

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course goal: This course provides learners with an awareness of the COSHH regulations, and how they control work with hazardous substances.

Learning Objectives

LO1 Explain the COSHH regulations and their applicability to the Oil and Gas Industry

LO2 Explain the legal obligations under COSHH for both employees and employers, and explain the REACH regulations

LO3 Explain the health effects of working with hazardous substances, and the various ways that these can enter the body

LO4 Explain the use of Safety Data Sheets, Labels and Assessments within the COSHH regulations

LO5 Explain the common labelling system and identify the standard symbols

LO6 Explain the appropriate use of Personal Protective Equipment

LO7 Explain requirements for storage, handling and disposal of hazardous substances

LO8  Define the control measures for handling hazardous substances and explain the control hierarchy

LO9 Explain the process for dealing with hazardous substances in the event of a spill

LO10 Define the recording and reporting process within the COSHH Regulations

Who is the course for?

All personnel involved in the transportation or supporting of a load by hand or bodily force.

Is previous experience required?

No previous experience is required to complete this course. 

How will the course benefit me?

The aim of this course is to increase learners’ awareness of the importance of safe manual handling operations and the risks involved with manual handling. The course also aims to outline best practices for the correct handling techniques for safe lifting; and for the pushing and pulling of loads.

How will the course benefit my company?

This course will benefit your company by reducing manual handling accidents.

What standards are referenced in the course?

• The Manual Handling Operations Regulations

• The Management of Health and Safety at Work Regulations

• Health and Safety at Work Act

• Health and Safety Executive (HSE)

Assessment Details

Course assessment with an 80% pass mark and two attempts.

Who is this course for?

All personnel who work in a role within the Oil and Gas Industry that may have an impact on the environment.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course aims to provide an introduction to the issues involved with successful environmental management in the Oil and Gas Industry.

How will this course benefit my company?

The course will benefit companies by ensuring that all relevant personnel have an understanding of the issues involved with successful environmental management in the Oil and Gas Industry, which will help to protect the environment.

What standards are referred to in this course?

• Department of Energy and Climate Change (BEIS (formally DECC))

• The Scottish Environment Protection Agency (SEPA) in Scotland

• The Environment Agency (EA) in England, Wales and Northern Ireland

• ISO 14001 Environmental Management Systems (EMS)

• British Standard Institute's BS7750 - Specification for Environmental Management Systems (BS11994)

• Integrated Pollution Prevention and Control (IPPC) Directive

• Control of Major Accident Hazards (COMAH) Regulations

Is there an assessment?

No

This course was first developed in 2014 by the laboratory company Kystlab AS, which was our company name back then. The scaling and development of our company have included both mergers and shareholder changes, and our name is now Nemko Norlab AS – a part of renowned Nemko Group. We are still the largest, Norwegian owned laboratory company, and “Clean water offshore” is still based on our company´s year-long experience with water laboratory analysis, including potable water offshore. In Nemko Norlab the scientific know-how is further strengthened, and the service portfolio to the offshore segment expanded significantly. All together we now conduct over 100.000 routine analyses annually related to drinking water.

New in the 5th Edition

- As with the Covid-19 virus, the focus on the lethal shower microbe Legionella is increasing offshore due to the risk of disease outbreak. The training course has therefore been further strengthened to prevent Legionella disease.

- The course is also updated according to new recommendations for the annual sampling program, changes that potentially will lower analysis costs.

- This edition has also been updated in accordance with current regulations, including an important change in authority responsibility. The Institute of Public Health is no longer responsible for anything offshore.

General course info

 - The course is well illustrated to provide the best possible understanding and interpretation of the comprehensive regulations.

- There are intuitive and useful exercises throughout the course. The course is available in both Norwegian and English.

- Based on «Safe, Sufficient and Good Potable Water Offshore», the course highlights situations the participant typically may encounter in everyday work.

For more info:

- Contact your Mintra Key Account Manager to order course licenses.

- Contact anne.kristin.gussias@nemkonorlab.com for professional inquiries.

Please note: this course is also available in an Norwegian-language version.

The course is delivered by the accredited laboratory NEMKO NORLAB AS. 

Who is this course for?

Personnel requiring an awareness or understanding of the change management process.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide an overview of management of change. The course focuses on the steps of the management of change process, the roles and responsibilities of personnel, and the risks involved in change management and their associated control measures.

How will this course benefit my company?

By ensuring you have an overview of the management of change process.

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Personnel responsible for assisting helicopters to land safely offshore (Helicopter Landing Officer (HLO) and Helideck Assistant (HDA))

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?

This course aims to provider learners with industry best practice in relation to Helicopter Landing Officer (HLO) duties and consists of the following sections:

Section 1: Laws and Regulations Governing Helicopter Traffic

Section 2: Introducing the Helideck: Markings and Equipment

Section 3: In Flight Mode: Preparing for a Typical Helicopter Flight

Section 4: Managing Helideck Operations

Section 5: The Importance of Communication

Section 6: Aviation Fuel and Refuelling Operations

Section 7: Fire Safety

Section 8: Managing Emergency Situations

How will this course benefit my company?

By ensuring you have an overview of industry best practice in relation to Helicopter Landing Officer (HLO) duties

What standards are referred to in this course?

- Management of Offshore Helideck Operations 1993

- Civil Aviation Publication (CAP) 437

- Well (Design and Construction, etc.) Regulations 1996 Approved Codes of Practice

Legislation referred to: 

- UK Offshore Operators Association (UKOOA)

- Civil Aviation Authority (CAA)

- Maritime and Coastguard Agency

- United Kingdom Continental Shelf (UKCS)

- International Air Transport Association (IATA)

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Personnel requiring an awareness and understanding of hazardous substances risks and controls.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course provides learners with an awareness of working with hazardous substances

How will this course benefit my company?

By ensuring you are aware of working with hazardous substances so you can assist and inform best practice in your organisation.

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Personnel requiring awareness or undertanding of LOTO in the US.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

To ensure that relevant personnel have a common and consistent approach to industry best practice in relation to US LOTO controls.

How will this course benefit my company?

By ensuring you have an overview of industry best practice in relation to LOTO controls.

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Trainee Oil and Gas Operations Technicians and Maintenance Personnel

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide an overview of the Heating, Ventilation and Air Conditioning (HVAC) system

How will this course benefit my company?

By ensuring you have an overview of the Heating, Ventilation and Air Conditioning (HVAC) system

What standards are referred to in this course?

Minimum Efficiency Reporting Value (MERV)

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

All personnel who could potentially be exposed to H2S in the workplace.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course aims to give offshore personnel the knowledge required to understand the hazards and controls associated with working in an environment where they could potentially be exposed to H2S.

How will this course benefit my company?

By ensuring you are aware of the hazards and controls associated with H2S exposure, which will in turn reduce incidents and accidents offshore.

What standards are referred to in this course?

Occupational Safety and Health Administration (OSHA)

US National Institute for Occupational Safety (NIOSH)

American Conference of Government Industrial Hygienists (ACGIH)

Is there an assessment?

Yes

This course aims to enhance the capabilities of shipboard personnel who sail on ships using LFF (low flashpoint fuel) as propulsion energy. It focuses on the responsibilities of all personnel serving on these kinds of ships. The course is developed in accordance with IMO model course 7:13.

1st January 2017 the IGF Code was made mandatory and STCW now includes new minimum requirements for the training and qualifications of personnel on ships subject to the IGF Code. This training program has been approved by the Norwegian Maritime Authority. The training consists of an e-learning course, practical assessment at a facility center and a classroom exam. When the training is completed a course diploma is issued. 

The practical training takes place at facilities located in various parts of Norway and abroad. Please choose the most convenient training for yourself or your employees. It is possible for our instructors to perform the practical assessment on the premises of a client. Should this be of interest please contact us on: post@gassteknikk.no

This course aims to give offshore personnel a greater understanding of the hazards associated with packaging and cargo handling and the movement of cargo to, and from, offshore installations.

Course Content
-Explain the responsibilities and duties of all personnel and their duties under current legislation
-Explain the importance of checking for dropped objects and identify the areas that should be monitored
-Explain the key areas of safe lifting and slinging operations
-Explain the key principal points to be considered when preparing cargo for shipment to and from offshore
locations
-Describe the procedures involved for shipping freight by air
-Define what is classified as ‘Dangerous Goods by Sea’ and the main considerations for shipping
-Define what is classified as ‘Dangerous Goods by Air’ and the main considerations for shipping
-Explain the principal requirements for waste management
-Identify examples of bad practice

Who is this course for?

Any personnel who require an awareness of human factors.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course aims to introduce learners to the concept of human factors and how they impact situational awareness.

How will this course benefit my company?

The course will benefit companies by ensuring that all personnel have an understanding of the human factors that can affect their situational awareness, resulting in reduced accidents and injuries.

What standards are referred to in this course?

No standards or regulations are referenced in this course.

Is there an assessment?

No

This course aims to provide all relevant personnel with the knowledge required to understand the hazards and controls associated with the use of abrasive wheels.

Learning Objectives

- Explain what is meant by the term ‘Abrasive Wheel’

- Describe typical regulatory requirements for abrasive wheels

- Give examples of different types of abrasive wheels

- Explain how abrasive wheels operate

- Explain the importance of using guards during grinding operations

- Explain the requirements for portable and hand-held grinding machines

- Explain the main hazards of grinding operations

- Give examples of common problems faced when using abrasive wheels

- Explain what the PPE requirements are during grinding operations

- Identify the safety measures that must be in place during grinding operations

Who is this course for?

Personnel such as processors or trainee processors requiring awareness or understanding of the various process safety systems.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide learners with an overview of the various process safety systems that are employed in the Oil and Gas Industry.

How will this course benefit my company?

By ensuring you have an overview of the process of the various process safety systems that are employed in the Oil and Gas Industry.

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

All employees at all levels of the organisation.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

Insufficient understanding of risk often leads to delayed projects, accidents and other unwanted incidents.

This course provides a basic understanding of what risk is, how it can be managed and how understanding risk helps us make better decisions. 

How will this course benefit my company?

By ensuring you are aware and have a basic understanding of what risk is and how to manage risk. 

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice. 

Is there an assessment?

There is no exam upon completion of this course.

FAST TRACK is a learning method which provides you with bespoke learning content by identifying any knowledge gaps you may have in a particular subject area.

FAST TRACK is a pre-assessment learning tool which is designed to assess your existing knowledge of a particular subject area. The pre-assessment uses a pool of questions to test your current knowledge. The results of this assessment help identify your personal knowledge gaps. FAST TRACK then automatically creates a bespoke course to address these knowledge gaps.

This course covers the following learning objectives:

LO1 Define what is meant by ‘working at height’

LO2 Identify the key pieces of legislation that help to control work at height

LO3 Explain the duties that are placed on employers and employees by the Work at Height Regulations

LO4 Describe the hazards involved in working at height

LO5 Explain the importance of planning and risk assessment

LO6 Describe the hierarchy of control for managing and selecting equipment for work at height

LO7 Identify the factors that should be considered when assessing the method to be used for working at height

LO8 Describe the main methods of access for working at height and give examples of the different types of working at height equipment

LO9 Describe the rules for working with ladders

LO10 Describe the rules for working with scaffolds

LO11 Explain the importance of inspecting equipment

Who is this course for?
All personnel involved in rigging and lifting operations

Is previous experience required?
No previous experience is required to complete this course.

How will this course benefit me?
This course will provide you with an overview of rigging and lifting operations.

How will this course benefit my company?

This course will provide personnel with an overview of rigging and lifting operations.

What standards are referred to in this course?

• The Lifting Operations and Lifting Equipment Regulations (LOLER) 

• The Provision and Use of Work Equipment Regulations (PUWER) 

• The Safe Use of Lifting Equipment: Approved Code of Practice (ACOP)

• Lifting Equipment at Work Guidance

• The Personal Protective Equipment at Work Regulations

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Personnel requiring an understanding & awareness of the role of a fire warden or have recently been allocated this role or require a refresher.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide Fire Wardens with an overview of the knowledge that they need to carry out their duties safely and effectively in line with industry best practice

How will this course benefit my company?

By ensuring you have the knowledge needed to carry out  duties safely and effectively in line with industry best practice

What standards are referred to in this course?

Health and Safety at Work Act

The Fire (Scotland) Act

The Regulatory Reform (Fire Safety) Order

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Personnel who are required to work with Piping and Instrumentation Diagrams.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course will enable you to describe the information provided in a P&ID and explain why this information is useful.

How will this course benefit my company?

Personnel who are able read and understand the information provided in P&IDs are better able to troubleshoot system problems.

What standards are referred to in this course?

• Institute de Algerian Normalisation

• Standards Association of Zimbabwe

Is there an assessment?

Once you have completed each section of the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the section and have a pass mark of 80%.

Who is this course for?

This course is aimed at all personnel involved in mechanical joint operations, particularly those who are expected to undertake related duties in the workplace.

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?

This course aims to provide learners with an introduction to the principles of the equipment and technology associated with the bolting of flanged joints for pressurised systems. This course is intended to reflect industry """"best practice"""" for competence in relation to mechanical joint operations and applies to both the onshore and offshore Oil and Gas Industry.

This course contains the following sections:

Section 1: An Introduction to Mechanical Joint Integrity

Section 2: Principles of Hand Torquing

Section 3: Principles of Hydraulic Tensioning

Section 4: Principles of Controlling Tightening

How will this course benefit my company?

By ensuring you are introduced  to the  principles of the equipment and technology associated with the bolting of flanged joints for pressurised systems

What standards are referred to in this course?

N/A

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course Goal:

This course aims to provide learners of an awareness of US best practice in relation to confined space entry (CSE), hazardous atmospheres, and the necessary equipment, and permits required to work in confined spaces.

It will also examine the hazards and hazard control methods that are required to undertake work safely in a confined space and the actions that should be taken in an emergency.

Learning Objectives

LO1  Explain what is meant by a Confined Space

LO2  Give examples of Confined Spaces

LO3 Describe the dangers that can be caused by confined space entry work 

LO4 Identify OSHA requirements for permit-required entry operations

LO5 Explain how to avoid entering confined spaces

LO6 Explain the importance of having a Safe System of Work in place

LO7 Describe individual roles and responsibilities involved in Confined Space Entry work 

LO8 Explain the requirements for gas testing

LO9 Identify acceptable levels for atmospheric test results 

LO10  Give examples of Confined Space Entry site safety equipment

LO11  Explain the actions to take in an emergency 

LO12  Explain Confined Space Entry alarm procedures

Course Goal:

This course provides learners with an awareness of US best practice in relation to working at height and fall protection.

Learning Objectives:

LO1 Identify when fall protection is required

LO2 Identify the legislative and regulatory requirements for fall protection that help to control work at height

LO3 Explain the duties that are placed on employers and employees

LO4 Describe the hazards involved in working at height

LO5 Explain the importance of planning and risk assessment

LO6 Describe the hierarchy of control for managing and selecting fall protection equipment 

LO7 Identify the factors that should be considered when assessing fall protection methods

LO8 Describe the main methods of access for working at height and give examples of the different types of fall protection equipment

LO9 Describe the rules for working with ladders

LO10 Describe the rules for working with scaffolds

LO11 Explain the importance of inspecting equipment

LO12 Explain how to correctly use a safety harness

Course Goal:

This course aims to increase the learner's awareness of US best practice in relation to Personal Protective Equipment (PPE), and outline the responsibilities of employers and personnel in relation to PPE.

Learning Objectives

Section 1: The Importance of PPE

LO1 Define what is meant by Personal Protective Equipment (PPE)

LO2 Identify the regulations surrounding the use of PPE

LO3 Describe the Hierarchy of Control measures

LO4 Describe the duties and responsibilities of employers in relation to PPE

LO5 Explain the importance of PPE-related training, information and instruction 

LO6 Describe the responsibilities of personnel in relation to PPE

Section 2: Types of PPE

LO7 Identify the different types of PPE 

LO8 Describe how to select, use and maintain different types of PPE

Section 3: PPE Requirements

LO9 Identify different types of Respiratory Protective Equipment (RPE)

LO10 Explain the requirements for face fit testing

LO11 Explain the requirements for the use of fall protection

LO12 Explain the requirements for assessing the suitability and compatibility of PPE

LO13 Describe the four levels of PPE protection

LO14 Explain the importance of proper donning and doffing techniques