Course catalogue

Who is this course for?

All personnel who work in a role within the Oil and Gas Industry that may have an impact on the environment.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course aims to provide an introduction to the issues involved with successful environmental management in the Oil and Gas Industry.

How will this course benefit my company?

The course will benefit companies by ensuring that all relevant personnel have an understanding of the issues involved with successful environmental management in the Oil and Gas Industry, which will help to protect the environment.

What standards are referred to in this course?

• Department of Energy and Climate Change (BEIS (formally DECC))

• The Scottish Environment Protection Agency (SEPA) in Scotland

• The Environment Agency (EA) in England, Wales and Northern Ireland

• ISO 14001 Environmental Management Systems (EMS)

• British Standard Institute's BS7750 - Specification for Environmental Management Systems (BS11994)

• Integrated Pollution Prevention and Control (IPPC) Directive

• Control of Major Accident Hazards (COMAH) Regulations

Is there an assessment?

No

Who is the course for?

All personnel involved in the transportation or supporting of a load by hand or bodily force.

Is previous experience required?

No previous experience is required to complete this course. 

How will the course benefit me?

The aim of this course is to increase learners’ awareness of the importance of safe manual handling operations and the risks involved with manual handling. The course also aims to outline best practices for the correct handling techniques for safe lifting; and for the pushing and pulling of loads.

How will the course benefit my company?

This course will benefit your company by reducing manual handling accidents.

What standards are referenced in the course?

• The Manual Handling Operations Regulations

• The Management of Health and Safety at Work Regulations

• Health and Safety at Work Act

• Health and Safety Executive (HSE)

Assessment Details

Course assessment with an 80% pass mark and two attempts.

Who is this course for?

Personnel requiring an awareness or understanding of the change management process.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide an overview of management of change. The course focuses on the steps of the management of change process, the roles and responsibilities of personnel, and the risks involved in change management and their associated control measures.

How will this course benefit my company?

By ensuring you have an overview of the management of change process.

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

This course aims to give offshore personnel a greater understanding of the hazards associated with packaging and cargo handling and the movement of cargo to, and from, offshore installations.

Course Content
-Explain the responsibilities and duties of all personnel and their duties under current legislation
-Explain the importance of checking for dropped objects and identify the areas that should be monitored
-Explain the key areas of safe lifting and slinging operations
-Explain the key principal points to be considered when preparing cargo for shipment to and from offshore
locations
-Describe the procedures involved for shipping freight by air
-Define what is classified as ‘Dangerous Goods by Sea’ and the main considerations for shipping
-Define what is classified as ‘Dangerous Goods by Air’ and the main considerations for shipping
-Explain the principal requirements for waste management
-Identify examples of bad practice

Who is this course for?

Trainee Oil and Gas Operations Technicians and Maintenance Personnel

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide an overview of the Heating, Ventilation and Air Conditioning (HVAC) system

How will this course benefit my company?

By ensuring you have an overview of the Heating, Ventilation and Air Conditioning (HVAC) system

What standards are referred to in this course?

Minimum Efficiency Reporting Value (MERV)

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Personnel such as processors or trainee processors requiring awareness or understanding of the various process safety systems.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide learners with an overview of the various process safety systems that are employed in the Oil and Gas Industry.

How will this course benefit my company?

By ensuring you have an overview of the process of the various process safety systems that are employed in the Oil and Gas Industry.

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Any personnel who require an awareness of human factors.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course aims to introduce learners to the concept of human factors and how they impact situational awareness.

How will this course benefit my company?

The course will benefit companies by ensuring that all personnel have an understanding of the human factors that can affect their situational awareness, resulting in reduced accidents and injuries.

What standards are referred to in this course?

No standards or regulations are referenced in this course.

Is there an assessment?

No

Who is this course for?

Personnel who are required to work with Piping and Instrumentation Diagrams.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course will enable you to describe the information provided in a P&ID and explain why this information is useful.

How will this course benefit my company?

Personnel who are able read and understand the information provided in P&IDs are better able to troubleshoot system problems.

What standards are referred to in this course?

• Institute de Algerian Normalisation

• Standards Association of Zimbabwe

Is there an assessment?

Once you have completed each section of the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the section and have a pass mark of 80%.

Who is this course for?

Personnel requiring an understanding & awareness of the role of a fire warden or have recently been allocated this role or require a refresher.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide Fire Wardens with an overview of the knowledge that they need to carry out their duties safely and effectively in line with industry best practice

How will this course benefit my company?

By ensuring you have the knowledge needed to carry out  duties safely and effectively in line with industry best practice

What standards are referred to in this course?

Health and Safety at Work Act

The Fire (Scotland) Act

The Regulatory Reform (Fire Safety) Order

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is the course for?

All personnel working within the Oil and Gas Industry (onshore and offshore).

Is previous experience required?

You do not require previous experience to complete this course.

How will the course benefit me?

This course will provide you a basic understanding the ways in which industrial operations can impact the environment and the steps that we can all take to minimise these impacts.

How will the course benefit my company?

Environmentally aware personnel can help to reduce the environmental impacts of your operations and improve environmental performance.

What standards are referenced in the course?

ISO 14001 Environmental Management Systems

Offshore Chemical Regulations

Integrated Pollution Prevention and Control (IPPC) Directive

Control of Major Accident Hazards (COMAH) Regulations

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

This course is aimed at all personnel involved in mechanical joint operations, particularly those who are expected to undertake related duties in the workplace.

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?

This course aims to provide learners with an introduction to the principles of the equipment and technology associated with the bolting of flanged joints for pressurised systems. This course is intended to reflect industry """"best practice"""" for competence in relation to mechanical joint operations and applies to both the onshore and offshore Oil and Gas Industry.

This course contains the following sections:

Section 1: An Introduction to Mechanical Joint Integrity

Section 2: Principles of Hand Torquing

Section 3: Principles of Hydraulic Tensioning

Section 4: Principles of Controlling Tightening

How will this course benefit my company?

By ensuring you are introduced  to the  principles of the equipment and technology associated with the bolting of flanged joints for pressurised systems

What standards are referred to in this course?

N/A

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Personnel requiring an awareness or understanding of the role of Banksmen and Slingers.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to give an overview of the roles of the Banksman and Slinger

How will this course benefit my company?

To ensure you have an overview of the roles of the Banksman and Slinger

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Personnel requiring awareness or understanding of upstream oil and gas operations.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide learners with an overview of upstream oil and gas operations.

How will this course benefit my company?

By ensuring you have an overview of the process of upstream oil and gas operations.

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Personnel requiring an awareness or understanding of drilling technology.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide learners with an introduction to the Oil and Gas Industry and the different stages required for extracting and producing hydrocarbons.

How will this course benefit my company?

By ensuring you have an introduction to the Oil and Gas Industry and the different stages required for extracting and producing hydrocarbons.

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is the course for?

All personnel involved in the transportation or supporting of a load by hand or bodily force.

Is previous experience required?

No previous experience is required to complete this course. 

How will the course benefit me?

The aim of this course is to increase learners’ awareness of the importance of safe manual handling operations and the risks involved with manual handling. The course also aims to outline best practices for the correct handling techniques for safe lifting; and for the pushing and pulling of loads.

How will the course benefit my company?

This course will benefit your company by reducing manual handling accidents.

What standards are referenced in the course?

• The Manual Handling Operations Regulations

• The Management of Health and Safety at Work Regulations

• Health and Safety at Work Act

• Health and Safety Executive (HSE)

Is there an assessment?

Course assessment with a 100% pass mark and unlimited attempts

FAST TRACK is a pre-assessment learning tool which is designed to assess your existing knowledge of a particular subject area.

The pre-assessment uses a pool of questions to test your current knowledge.

The results of this assessment help identify your personal knowledge gaps.

FAST TRACK then automatically creates a bespoke course to address these knowledge gaps.

You will ONLY be given content on any knowledge gaps identified in the pre-assessment.

Your knowledge and understanding is then re-assessed.

Course Goal: To increase learners’ awareness of the risks of hand-arm vibration and the effects that it can cause. The course also looks at the control measures that should be taken to reduce exposure to vibration, based on industry best practice.

Who is the course for?

All onshore and offshore personnel that use vibration-inducing equipment.

Is there an assessment? 

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Learning objectives

LO1 Describe hand-arm vibration and the effects it can cause 

LO2 Explain what Hand-Arm Vibration Syndrome (HAVS) is and how to identify its early symptoms

LO3 Identify the types of jobs and equipment that are most likely to involve hand-arm vibration and expose workers to the risk of health effects

LO4 Explain the duties of employers under the Control of Vibration at Work Regulations

LO5 Outline the measures that employees can take to reduce the risk of HAVS

LO6 Outline the duties of equipment manufacturers and suppliers in reducing vibration risks

LO7 Describe the process of assessing the vibration risk to employees in accordance with the Exposure Action Value (EAV) and Exposure Limit Value (ELV)

LO8 Describe the control measures that should be taken to reduce exposure to vibration

LO9 Explain the importance of monitoring exposure to vibration, and health surveillance

LO10 Explain the importance of information and training in reducing the risks to health from vibration

Who is the course for?

Personnel requiring an awareness or understanding of typical flanges and gaskets and their functions.

Is previous experience required?

It is recommended you have operational experience prior to undertaking this course.

How will the course benefit me?

This course aims to provide learners with an overview of typical flanges and gaskets found in the Oil and Gas Industry.

How will the course benefit my company?

By ensuring you are introduced to the role of of typical flanges and gaskets in operations.

What standards are referenced in the course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

All relevant personnel.

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role.

How will this course benefit me?

This course aims to provide an introduction to Gas Compression.

The course has seven modules:

Module 1: Introduction to Gas Compression

Module 2: Gas Compression Systems

Module 3: Gas Compressors and their Principles

Module 4: Gas Compressors and their Components

Module 5: Gas Compression Systems: Controlling Surge

Module 6: Gas Compression Systems: Start-up and Shutdown

Module 7: Gas Compression Systems: Innovation

How will this course benefit my company?

To ensure you have had an introduction to Gas Compression.

What standards are referred to in this course?

The course is made according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.This course has seven modules:

Who is this course for?

For all personnel who are involved in working with gas turbines.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course aims to provide an introduction to gas turbines and how they are designed and operated.

How will this course benefit my company?

The course will benefit companies by ensuring that all relevant personnel have an understanding of gas turbines and how they are designed and operated.

What standards are referred to in this course?

No standards or regulations are referenced in this course.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Personnel who require awareness and understanding of the hazards and controls of common compressed air uses.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to encourage the safe use of compressed air and describes the ways in which compressed air can be dangerous as well as how to minimise the risks of such dangers occurring

How will this course benefit my company?

By ensuring you are introducted  to safe use of compressed air and describes the ways in which compressed air can be dangerous as well as how to minimise the risks of such dangers occurring

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

All personnel.

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role.

How will this course benefit me?

This course aims to provide learners with the knowledge of how to assess when it is safe to tackle a fire, information on different types of extinguisher, and an overview of how to operate a fire extinguisher safely.

How will this course benefit my company?

To ensure you have the knowledge of how to assess when it is safe to tackle a fire, information on different types of extinguisher, and an overview of how to operate a fire extinguisher safely.

What standards are referred to in this course?

The course is made according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

All relevant personnel

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?

This course aims to provide an overview of the hazards associated with the use of portable hand tools and the measures that should be in place to control the risk of injury

How will this course benefit my company?

By ensuring you have an overview of the hazards associated with the use of portable hand tools and the measures that should be in place to control the risk of injury

What standards are referred to in this course?

Provision and Use of Work Equipment Regulations 1998 (PUWER)

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Trainee Oil and Gas Operations Technicians

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide an overview of fuel systems

How will this course benefit my company?

By ensuring you have an overview of fuel systems

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

"Who is this course for?

Personnel requiring awareness or understanding of gas detection and measurement methods.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide information about the types of gases found in the oil and gas industry and how these gases are detected and measured

How will this course benefit my company?

By ensuring you have  information about the types of gases found in the oil and gas industry and how these gases are detected and measured

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%. "

Who is this course for?

Personnel who work with pumps in the Oil & Gas industry.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course aims to provide an overview of the various types of pumps used in the Oil and Gas Industry.

How will this course benefit my company?

The course will benefit companies by ensuring that all personnel who work with pumps have an overview of each type and how they work.

What standards are referred to in this course?

No standards or regulations are referenced in this course.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Personnel requiring an awareness or understanding of flare systems.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course provides an overview of flare systems.

How will this course benefit my company?

By ensuring you have an overview of flare systems.

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Oil and Gas Operations Technicians.

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role.

How will this course benefit me?

This course aims to provide an overview of coiled tubing equipment and its operation.

How will this course benefit my company?

To ensure you have an overview of coiled tubing equipment and its operation.

What standards are referred to in this course?

This course is made according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

This course is suitable for all personnel to assist in first aid.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course is designed to enable personnel to treat a casualty who is injured at work, or suffers from a serious illness, while waiting for qualified medical assistance to arrive.

How will this course benefit my company?

By ensuring you enable personnel to treat a casualty who is injured at work, or suffers from a serious illness, while waiting for qualified medical assistance to arrive.

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Why waste time re-learning what you already know?

This course starts with a pre-assessment. If you pass the pre-assessment, you won't receive any additional content.

If you need a refresher, you'll receive targeted learning that's specific to your knowledge gaps. Followed by a quick check to confirm your understanding.

Who is the course for?

All personnel involved with confined space entry work.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course aims to provide learners with an overview of industry best practice in relation to confined space entry work.

How will the course benefit my company?

The course will benefit companies by reducing confined space entry related injuries.

What standards are referenced in the course?

• Confined Space Regulations, and

• EH40/2005

Assessment Details

Course assessment has unlimited attempts to pass at 100%.

Course Goal: This course aims to provide learners with an introduction to the principles of the systems associated with oil and gas processing operations. 

Who is this course for?

Personnel involved in UK oil and gas operations.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to highlight best practice in relation to environmental compliance and toidentify the environmental regulatory regime that oversees offshore installations and oil and gas operations within the UK Continental Shelf (UKCS).

How will this course benefit my company?

By ensuring you have been introduced to best practice in relation to environmental compliance and toidentify the environmental regulatory regime that oversees offshore installations and oil and gas operations within the UK Continental Shelf (UKCS).

What standards are referred to in this course?

 ISO 14001

Environmental Impact Assessment (EIA) Regulations

Habitat and Conservation Regulations

European Union Habitat Directive

Environmental Statement

Environmental Policy

European Union Offshore Safety Directive

OSPAR Convention

The Offshore Petroleum Production and Pipelines (Assessment of Environmental Effects) Regulations

The Offshore Petroleum Activities (Conservation of Habitats) Regulations

The Offshore Marine Conservation Regulations

The Offshore Combustion Installations (Prevention and Control of Pollution) Regulations

The Offshore Installations (Emergency Pollution Control) Regulations

The Offshore Chemical Regulations

The Greenhouse Gas Emissions Trading Scheme Regulations

The Offshore Petroleum Activities (Oil Pollution Prevention and Control) (OPPC) Regulations

The REACH Enforcement Regulations

The Fluorinated Greenhouse Gases Regulations

Integrated Pollution Prevention and Control (IPPC) Directive) 

Control of Major Accident Hazards (COMAH) Regulations

Merchant Shipping (Prevention of Pollution by Sewage and Garbage from Ships) Regulations

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Personnel requiring an awareness or understanding of common handling and storage methods for chemicals.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide an overview of the requirements for the handling and storage of hazardous substances

How will this course benefit my company?

By ensuring you have an overview of the requirements for the handling and storage of hazardous substances

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%. 

Who is this course for?
Newcomers to the Oil and Gas Industry

Is previous experience required?
You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?
This course aims to provide a brief overview of fire and safety systems

How will this course benefit my company?
By ensuring you have a brief overview of fire and safety systems.

What standards are referred to in this course?
Health and Safety at Work Act
The Management of Health and Safety at Work Regulations
The Regulatory Reform (Fire Safety) Order
The Fire (Scotland) Act

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course Goal: This course aims toprovide learners with an overview of industry best practice associated with pressure vessel inspection

Learning Objectives:

LO1 Define what is meant by a ‘pressure vessel’

LO2 Give examples of pressure vessels

LO3 Identify the factors that can cause pressure vessel incidents

LO4 Identify the hazards posed by pressure vessel failure

LO5 Explain the requirements for inspections to be carried out by a competent person

LO6 Explain the requirements for a written scheme of examination

LO7 Describe how to carry out internal and external pressure vessel inspection

LO8 Describe how to carry out pressure pipework inspection

LO9 Explain the importance of carrying out regular pressure testing

LO10 Describe the control measures that are required to limit the risk posed by pressure vessels

Who is this course for?

All relevant personnel

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?

This course aims to provide an overview of Oil and Gas metering, Sampling and Pigging

This course contains seven modules:

Module 1: Introduction to Metering

Module 2: Gas Metering Principles of Flow Measurement

Module 3: Gas Metering

Module 4: Oil Metering

Module 5: Metering Operations

Module 6: Sampling Systems

Module 7: Pigging

How will this course benefit my company?

To ensure you have an overview of Oil and Gas metering, Sampling and Pigging

What standards are referred to in this course?

The course is made according to industry best practice. 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Personnel requiring an awareness and understanding of power generation systems and their associated risks.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to proivde learners with an overview of power generation systems used offshore.

How will this course benefit my company?

To ensure you have an overview of the power generation systems used offshore including hazards and their associated controls.

What standards are referred to in this course?

The course is made according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

All personnel working with electricity in the Oil and Gas Industry

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide all relevant personnel with an overview of the safety precautions to be taken when working on electrical equipment

How will this course benefit my company?

By ensuring you have an overview of the safety precautions to be taken when working on electrical equipment

What standards are referred to in this course?

Health and Safety at Work Act (1974)

Electricity at Work Regulations (1989)

Management of Health and Safety at Work Regulations (1999)

Electricity at Work Safe Working Practices (2003)

Offshore Electricity and Noise Regulations (1997) 

Provision and Use of Work Equipment Regulations (1998)

BS 7671: 2008 Requirements for Electrical Installations

Offshore Installations (Safety Case) Regulations 2005 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%

Who is this course for?

Personnel who require an awareness and understanding of methods of oil and gas recovery.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide learners with an introduction to oil and gas recovery methods

How will this course benefit my company?

By ensuring you are introduced to the various ways oil and gas are recovered from the well.

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Trainee refinery operations technicians.

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role.

How will this course benefit me?

This course aims to provide an introduction to the distillation of hydrocarbons.

How will this course benefit my company?

By ensuring you are introduced  to the distillation of hydrocarbons.

What standards are referred to in this course?

The course is made according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Process and Production personnel

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?

By ensuring you have an overview of industry best practice associated with gas treatment

This course contains seven modules:

Module 1: Introduction to Gas Treatment

Module 2: Problems Associated with Water in Gas Streams

Module 3: Liquid Desiccant Dehydration

Module 4: Solid Desiccant Dehydration

Module 5: Alternative Gas Dehydration Processes

Module 6: Acid Gas Removal Unit

Module 7: Removal of Other Impurities in Raw Gas Streams

How will this course benefit my company?

By ensuring you have an overview of industry best practice associated with gas treatment

What standards are referred to in this course?

This course does not refer to specific legislation or standards.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Personnel who require an awareness and understanding of various water injection methods.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide all relevant personnel with the knowledge required to understand water injection. 

This course contains nine modules:

Module 1: Introduction to Water Injection

Module 2: Reservoirs and Rock Properties

Module 3: Waterflooding

Module 4: Injection Water Impurities

Module 5: Water Treatment

Module 6: Water Injection Systems

Module 7: Water Quality Monitoring

Module 8: Well Design and Construction

Module 9: Operation of the Water Injection System

How will this course benefit my company?

To ensure you have the knowledge required to understand water injection.

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

All relevant personnel.

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role.

How will this course benefit me?

You will be introduced to the purpose of separation.

This course contains ten modules:

Module 1: The Purpose of Separation

Module 2: Reservoir Fluids

Module 3: The Principles of Separation

Module 4: Separator Types

Module 5: Separator Construction

Module 6: Multi-stage Separation

Module 7: Separator Control

Module 8: Separator Operation

Module 9: Problems Associated with Separators

Module 10: New Separation Technology

How will this course benefit my company?

Ensure you are introduced to separation.

What standards are referred to in this course?

The course is made according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Personnel requiring an awareness or understanding of the common safety methods when using lifting appliances and equipment.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to give an overview of requirements for safe use of lifting appliances and equipment.

How will this course benefit my company?

By ensuring you have an overview of the requirements for the safe use of lifting appliances and equipment.

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is the course for?

This course aims to provide an overview of the requirements for the safe handling of radioactive materials for personnel who work closely with it.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course provides learners with an awareness of the risks involved in working with radioactive materials.

How will the course benefit my company?

The course will benefit companies by ensuring that personnel understand the risks of working with radioactive materials and how to mitigate these risks.

What standards are referenced in the course?

No standards or regulations are referenced in this course.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is the course for?

Personnel requiring an awareness or understanding of of typical pressure relief systems.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will the course benefit me?

This course aims to provide learners with an overview of typical pressure relief systems found in the Oil and Gas Industry.

How will the course benefit my company?

By ensuring you are introduced to the role of of typical pressure relief systems in operations.

What standards are referenced in the course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Personnel requiring an awareness or understanding of the management of hydrocarbon releases.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide an overview of managing hydrocarbon releases

How will this course benefit my company?

By ensuring you have an overview of managing hydrocarbon releases

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Personnel requiring an awarneess or understanding of hydraulic systems.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to introduce learners to the different types of hydraulic systems.

How will this course benefit my company?

To ensure a minimum company understanding of different types of hydraulic systems found in the Oil and Gas Industry.

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%. 

Who is this course for?

Personnel requiring awareness or understanding of typical chemicals in use for well operations.

Is previous experience required?

You do not need prior knowledge or experience to complete this course

How will this course benefit me?

This course aims to provide learners with an awareness of industry best practice for working with chemicals in offshore drilling and well operations

How will this course benefit my company?

By ensuring you are aware of industry best practice for working with chemicals in offshore drilling and well operations

What standards are referred to in this course?

Offshore Chemicals Regulations (OCR) 2002

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Personnel requiring awareness or understanding of blinding, venting and pressure relief methods and associated safety measures.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide learners with an introduction to blinding, venting and pressure relief in oil and gas operations

How will this course benefit my company?

By ensuring you are introduced to blinding, venting and pressure relief in oil and gas operations

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

Trainee Oil and Gas Operations Technicians.

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role.

How will this course benefit me?

This course aims to provide an overview of Seawater and Firewater systems.

How will this course benefit my company?

To ensure you have an overview of Seawater and Firewater systems.

What standards are referred to in this course?

The course is made according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.