Course catalogue

Induction course in HSE is designed so that participants will have the first necessary expertise to ensure safety challenges in their daily work. This occurs in part through increased awareness of what is valuable and should be prioritized. The course also draws attention to the main framework governing the HSE The course is designed in order to create interest and motivation to work with HSE in the workplace.

Course contents

The course is divided into three topics:

-Care! - To take care of each other

-Terms and conditions - Laws, regulations and rules

-The challenging life - how to work without going wrong

Participants will

-Be motivated to work with safety in the workplace.

-Understand the relationship between a good safety work and preventing loss of important values such as life, health and nature in balance.

-Get an introduction to the main control elements of the HSE 

-Get advice on how they can work safely under time pressure and stress situations

Course provider: Proactima

Who is this course for?

Personnel requiring awareness or understanding of glycol regeneration.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will this course benefit me?

This course aims to provide learners with an overview of the process of glycol regeneration

How will this course benefit my company?

By ensuring you have an overview of the process of glycol regeneration.

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is the course for?

This eLearning course is aimed at individuals who work offshore, in any role, anywhere in the world.

Is previous experience required?

The course is designed for existing workers in the oil and gas industry. Completion of this course awards an IMIST certificate valid for four years, after which you will need to sit the course again to refresh your knowledge and earn a new certificate.

How will the course benefit me?

The offshore working environment is home to many hazards, which means that it is vital for everyone who goes offshore to have the same baseline level of safety knowledge. This course has been created with OPITO to set a global safety standard by applying a consistent level of safety awareness across nine safety critical areas and is applicable.

The knowledge gained in this course will help you to stay safe in your day-to-day activities offshore. It will also outline some of the systems and procedures in place to manage everyday operations offshore.

How will the course benefit my company?

By ensuring that your safety knowledge is at or above the baseline level, your company can rest assured that you are able to work offshore safety and in compliance with regulations and company procedures. Increased safety knowledge helps to prevent incidents and makes your working environment a safer place.

What standards are referenced in the course?

This course is written based on the OPITO standard International Minimum Industry Safety Training Standard (IMIST) (5312). As a global standard, the course is not written to meet any specific regional legislation but references industry best practices and standard operating procedures throughout.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 100%. 

The course starts with an optional pre-assessment that checks your existing knowledge of the course topics. The course will restructure so that it only contains the content needed to address the gaps in your knowledge.

Please find pre-course information and learning outcomes here: 

https://mintra.com/implementing-maintaining-opito-standards-policy

Section 7 of the “Safety Regulations for Work and Operation of Electrical Equipment and Installations” (FSE) sets requirements for yearly FSE training for relevant personnel. This e-learning course takes you through the requirements of the regulations and gives you training and instruction in FSE. The course focuses on safety for work on low voltage installations.

Kurset er for utførende personell som har arbeid som kan påvirke sikkerheten for elektriske anlegg ved bruk av mulige tennkilder

Kurset er i hht EN IEC 60079-14, NEK 420, Petroleumsloven, ATEX- Direktivet.

Who is the course for?

All personnel who work in a role that may put them at risk of a hand or body injury.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course will provide learners with an introduction on how to prevent hand and body injuries in the workplace.

How will the course benefit my company?

This course to ensure personnel have the knowledge of how to protect their hands and body from injury in the workplace, by following safety measures and understanding procedures.

What standards are referenced in the course?

Reporting of Injuries, Diseases and Dangerous Occurrences Regulations (RIDDOR)

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

All personnel who work with or on board Floating Production Storage and Offloading units (FPSOs).

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course aims to provide learners with an overview of industry best practice for FPSO vessel operations.

How will this course benefit my company?

The course will benefit companies by ensuring that all relevant personnel have an overview of industry best practice for FPSO vessel operations.

What standards are referred to in this course?

• International Convention for the Safety of Life at Sea (SOLAS)

• Port State Authority/Flag State

• International Maritime Organization (IMO)

• International Association of Classification Societies (IACS)

• American Bureau of Shipping (ABS)

• China Classification Society (CCS)

• Det Norske Veritas (DNV)

• Germanischer Lloyd (GL)

• Korean Register of Shipping (KR)

• Lloyd’s Register (LR)

• Nippon Kaiji Kyokai (ClassNK) (NK)

• Registro Italiano Navale (RINA)

Is there an assessment?

Once you have completed each section of the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the section and have a pass mark of 80%.

The object of this course is to help participants maintain and develop their knowledge, skills and attitudes regarding their operational / emergency response function.

Course Content

Portions of this course will include group discussion and exchange of experiences, led by a helicopter pilot in active offshore service or with experience from offshore flying:

- Experiences from helideck service

- Improvement potential

Participants should also be able to: 

- Learn from the experience and incidents of other helideck personnel.

- Transfer their own experience as heliguards/HLO to other helideck crews.

This course is valid for 24 months.

COURSE DESCRIPTION

In a risk assessment,  potential events and consequences are considered. In this course, we focus on unwanted events such as failures and accidents. This could be, for example, a gas leak or afire at an oil platform, that equipment stops working during an operation in a hospital, or that an accident occurs during the execution of a work task. The risk analysis process consists of three phases:

1) Planning

2) Risk assessment

3) Risk management

This course shows how these phases can be planned and implemented in practice. There are many guidelines and standards on how a risk assessmentcan be carried out, and many are adapted to particular industries and professional areas. This course presents a general approach that can be used in most industries.

COURSE CONTENT

•Introduction:What is risk? What is the purpose of a risk assessments?

•Risk assessment and risk management:Description of the steps in a risk assessment, what is important to look out for in the various steps, and how the risk assessment can be applied in risk management.

•Risk analysis methods:There are numerous risk assessment methods that are suitable for looking at different issues. An introduction is given to some of these; Hazid/ course risk analysis, SJA, HAZOP, FMEA and QRA. It’s crucial to choose a method that is well adapted to the problem you are looking at.

STANDARDS REFERRED TO IN THIS COURSE

- ISO 31000:2018 Risk Management

HOW WILL THIS COURSE BENEFIT ME, AND MY COMPANY?

After completing the course, participants should be able to understand what a risk assessment is and have knowledge of the relevant steps. Participants will also have basic knowledge of:

•Different risk analysis methods.

•Choice of risk analysis methods within the three main categories; simplified risk assessment, standard risk assessment and model-based risk assessment.

•Typical pitfalls for planning and carrying out risk assessments.

•Understanding how risk assessments can contribute to decision support.

For more information and prices:

http://www.hseacademy.com

learning@proactima.com

Phone: + 47 4000 1933

The NORSOK R-003 standard, Safe Use of Lifting Equipment is the industry standard for operating lifting equipment on the Norwegian continental shelf.

The course, “Safe Use of Offshore Cranes”, builds on NORSOK R-003 and is an important means for satisfying governmental regulations for maintaining and verifying competence in the safe use of lifting equipment.

The course focuses ongood work practices, as well as good attitudes and understanding of safety for crane operations, in accordance with the NORSOK R-003 standard.

This course gives an introduction to the new version of R-003 which was launched in 2017.

The course contains references to the 2004 version of R-003, but the course in its entirety will be updated when the new version of R-003 is launched with an updated Appendix B.

Course Content:

-Introduction

-Rolls and responsibilities

-Planning and supervising

-Communication

-Supply vessels

-Load bearers

-Chemicals

-Lifting to and from the rig floor

-Using guy wires

-Lifting drilling pipes and casings

-Assembly and disassembly lifts

-Lifting scaffolding material and planks

-Operating blind

-Personnel lifts