Course catalogue

Who is this course for?

This FSE High and Low Voltage Training course is suitable for everyone working on low and high voltage installations.

Is previous experience required?

You do not need prior knowledge or experience to complete this course, but it is assumed that you are competent in your designated role.

How will this course benefit me?

The course meets the requirements set in Section 7 of the ‘Safety Regulations for Work and Operation of Electrical Equipment and Installations – FSE’ which is that all relevant personnel undertake annual training and instruction in FSE. The course also provides the necessary training and instruction in first aid, focusing on electrical injuries, with the exception of the mandatory practical training in cardiopulmonary resuscitation (CPR).

The regulations of various authorities make FSE applicable to all those working with electricity, whether on board ship, on platforms or on land. This course is suitable for all, regardless of which industry you work in.

The authorities require that training in FSE and first aid in the event of electrical accidents is undertaken at least once a year. No more than 12 months shall elapse between training courses.

How will this course benefit my company?

By ensuring you have the knowledge and competence to be working on low and high voltage installations.

What standards are referred to in this course?

• Section 7 of the ‘Safety Regulations for Work and Operation of Electrical Equipment and Installations – FSE’

• The European standard

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is the course for?

All personnel who work in the maritime industry and would benefit from an awareness of the International Ship and Port Facility Security (ISPS) Code.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course aims to provide an overview of the International Ship and Port Facility Security (ISPS) Code.

How will the course benefit my company?

The course will benefit companies by ensuring that all relevant personnel have an understanding of the International Ship and Port Facility Security (ISPS) Code, the security attacks that can occur at sea and how to act in an emergency situation.

What standards are referenced in the course?

International Convention for the Safety of Life at Sea (SOLAS)

The International Ship and Port Facility Security (ISPS) Code

Is there an assessment? 

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for:
Every seafarer with designated security duties (STCW Table A-VI/6-2)

Is previous experience required?
You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?
Piracy and armed robbery is a real threat to seafarer’s onboard ships and mobile units at sea. 1st January 2014 a requirement about seafarer’s security training was put in force for all ships to which the ISPS Code applies.
The training consists of an e-learning course and the performance of certain on board activities described in a checklist. The client’s approved instructors must sign completed checklists for each trainee. When the training is completed a certificate is issued by the Norwegian Maritime Authority.

This course will be a part of a blended learning in two stages:
The first stage is this e-learning course
The second stage will be on board training reflecting the realities on-board the vessel you are serving on. This training might take a couple of weeks or more to complete, as you will be required to participate in a number of drills.

The training will be complete when all the elements of the checklist pertaining to your designated security duties.

Completion of this course requires that you are employed in a company that has a plan in place for on board training for this kind of activities. Contact Mintra for more information about how to complete this training.

The course will not be approved for private individuals.

How will this course benefit my company?
By ensuring you have the knowledge and are certified according to the STCW regulations.

What standards are referred to in this course?
STCW - Security Awareness, table A-VI/6-2
SOLAS - Safety of Life at Sea
MARPOL - Marine Pollution
ISM Code

This training programme in Designated Security Duties is approved by the Norwegian Maritime Authority.

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is the course for?

All people exposed to noise in their daily work.

Is previous experience required?

No previous experience is required.

How will the course benefit me?

The purpose of the course is to prevent noise-induced hearing impairment. You will learn how loud sound and noise affect us. You will also learn how you can properly protect yourself against noise and why that is so important.

How will the course benefit my company?

This course will benefit your company be ensuring that you are familiar with the safety precautions you should take in the workplace to protect your hearing.

What standards are referenced in the course?

The course is based on the current rules and regulations for working in areas where there is a risk of being exposed to noise that may be damaging to health.

Is there an assessment?

Yes

Who is this course for?

This course is suitable for personnel at all levels within an organisation.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

The Code of Conduct course provides an overview of the common values that govern responsible corporate practice and personal behaviour in a company.

How will this course benefit my company?

By ensuring awareness of common values that govern responsible corporate practice and personal behaviour in a company.

What standards are referred to in this course?

• The US Foreign Corrupt Practices Act (FCPA)

• The UK Bribery Act

• The OECD Convention on Combating Bribery of Foreign Public Officials

• The UN Convention Against Corruption

• The Norwegian Equality and Anti-Discrimination Act

• The EU antitrust law

• The US antitrust law

• The Norwegian Transparency Act

• The International Bill of Human Rights

• The UN Guiding Principles on Business and Human Rights

• The International Labour Organization (ILO) Declaration on Fundamental Principles and Rights at Work

• The UK Modern Slavery Act

• The UK Employment Act

• The UK Equality Act

Is there an assessment?

Yes

This course relates to how best practice, your attitudes, behavior and knowledge can prevent dropped objects and enhance the safety of you and your colleagues.

The content of this course is in compliance with Working Together for Safety’ handbook; Best practice - Dropped object Prevention. The course is developed by the same personnel who also developed collaboration for safety's handbook, Best practice - Dropped object Prevention, under the auspices of Equinor, a team with decades of experience within prevention, identification and controlling of dropped objects throughout the oil and gas industry.

Course Content
- Securing devices
- Securing of tools
- Securing of equipment
- Inspection, observation and follow-up checks

Contact BLH-DOM Safety Solutions AS for more information:
Tel.: +47 51 81 40 00
E-mail: post@blh-dom.com

Who is this course for?

All personnel who work with chemicals in the Oil and Gas Industry.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course provides learners with an in depth few on the use, management and control of chemicals in the Oil and Gas Industry and how to react in an emergency situation that has resulted from a chemical hazard.

How will this course benefit my company?

The course will benefit companies by ensuring that all personnel have an in depth view of industry best practice for working with chemicals, which will in turn, help keep those working with chemicals safe.

What standards are referred to in this course?

• The Control of Substances Hazardous to Health (COSHH)

• The Offshore Chemicals (Amendment) Regulations

• The Offshore Chemicals Regulations (OCR)

• Offshore Petroleum (Oil Pollution Prevention and Control) Regulations

• Regulation, Evaluation, Authorisation and restriction of Chemicals  (REACH)

• Occupational Safety and Health Administration (OSHA)

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?
Production operators.

Is previous experience required?
No previous experience is required to complete this course.

How will this course benefit me?
This course aims to provide appropriate knowledge of the techniques required for carrying out pressure testing and leak testing in the workplace.

How will this course benefit my company?
By ensuring you have appropriate knowledge of the techniques required for carrying out pressure testing and leak testing in the workplace.

What standards are referred to in this course?
This course does not refer to specific legislation or standards.

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Accreditation:

This course is approved by the Institution of Occupational Safety and Health (IOSH).

IOSH is the world’s Chartered body for safety and health professionals.

What that means:

We are the largest membership body for health and safety professionals.

We champion occupational safety and health causes and advocate for change.

We advise governments, NGOs and policymakers.

We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

We commission research and set national and international standards.

We shape the future of the profession.

The e-learning course, “Fire Prevention during Hot Work”, has been quality controlled by the Norwegian Fire Prevention Association and designed is to satisfy the requirements set by the insurance industry.

The course aims to reduce the number of fires caused by hot work and improve knowledge about the risk of fire during hot work.

Please Note! 

- Practical training must be completed within 3 months of (before or after) the eLearning

- Proof of practical is required to be sent to learningcentre@mintra.com

- Approved practical instructors list is available here https://www.brannvernforeningen.no/sertifisering/varme-arbeider/instruktorsok

- If these conditions are not met, Mintra cannot apply for your certificate

- You may be required to repeat the eLearning or practical again if conditions are not met in full

- Digital Certificates are issued from the Norwegian Fire Prevention Association (included in course fee)

- Plastic card certificates will incur an extra fee of NOK 450

- Further details on these notes are available in the attached document

Hot work documentation

You will be required to confirm your identity online before starting this course. In Trainingportal, we have implemented a fully automated process to make this a quick and painless experience.

Course Contents

The course focuses on duties and responsibilities during hot work and is divided into the following topics: 

- Hot work
- Regulations
- Fire theory
- Extinguishing fires
- Dangers of hot work
- Risk identification and preventive measures
- Documentation of safety
- If a fire starts

Course Goal: This course aims to provide an understanding of the duties and responsibility of a Ship Safety Officer and should be able to undertake the duties as a Ship’s Safety Officer or Safety Representative.

Who is the course for?

Any personnel taking on the duties of a Ship Safety Officer or Safety Representative including Ship Officers / HQSE Managers / Training Managers, and Engine and Deck Department Supervisors.

Is previous experience required?

Those eligible to perform duties as “Ship Safety Officer” or a “Safety Representative”, are limited to crew members who have no less than 2 years consecutive sea service since attaining the age of 18, which in the case of a safety representative on board a tanker shall include at least 6 months service on such a ship.

How will the course benefit me?

After successfully completing this course, and have the “Safety Officer – Checklist” completed and approved, you should be able to undertake the duties and responsibilities as Safety Officer, as defined in STCW Code 2010 Table A-II/2 and A-III/2. You will be a certified Safety Officer.

How will the course benefit my company?

Ensuring you are qualified and certified as a “Safety Officer”.

What standards are referenced in the course?

• MCA Code of Safe Working Practices for Merchant Seamen

• This Safety Officer course also covers relevant parts of STCW Code Tables A-II/2 and A-III/2 

• IMO Model Course 3.11.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.