Course catalogue

LEARNING OBJECTIVES

After the successful completion of the course, the participant should be able to:
• Explain the basic functionality of the K-Bridge system
• Operate the K-Bridge integrated navigation system
• Use the system in a safe and efficient mode
• Understand the K-Bridge system overview
• Operate  the system with all available functions in order to navigate safely under all conditions
• Explain the system’s menu structure
• Explain and utilize the system’s display setup
• Set safety values
• Recognize  alarms and malfunction indicators and actions to be taken
• Planning, validating and monitoring routes
• Change over to back up systems
• Install and update charts and licenses

CONTENT

• K-Bridge integrated navigation system
• Main system components and functionality
• Basic operation of K-RADAR, K-ECDIS, K-Conning and K-Autopilot
• Type-specific familiarization training on the K-Bridge ECDIS
• Navigation tools and functions
• Setting of safety parameters
• Sensor input and alarm handling
• Route planning, validation and monitoring
• Charts management
• Charts installation and updates 

LEARNING PROCESS

The training will be a combination of theoretical lessons  and practical exercises. The participants will be trained to find information by using the system and obtaincompetence of various applications.

SPECIAL INFORMATION

This course can be held onboard upon request.

CERTIFICATE

The course yields one diploma stating: K-Bridge Operator Course including ECDIS Familiarization.

LEARNING OBJECTIVES

After the course, the successful participants are able to:

• Carry out operational planning, risk assessment and hazard identification tasks
• Set up the DP system for a particular task
• Operate the communications
• Analyse the trends
• Discuss systems failures
• Decide on courses of action because of systems failures
• React to alarms and printer readout
• Initiate DP Alert status alarms
• React to all events occurring
• Operate the desk under normal and pressured conditions
• Practice effective teamwork
• Apply the lessons learned to date
• ASOGs

CONTENT

• Study of DP incidents
• Construction and use of work site diagrams, charts and vessel templates for use in DP operations
• Preparation of plans for a projected DP operation, contingency plans for expected deviations and emergencies
• Participation in simulated situations in a variety of DP operations while handling routine and emergency situations
• Risk and safety analysis, and defining DP equipment classes
• The DP system’s utilization of position measurements, and tests on position reference systems

LEARNING PROCESS

The training will be a combination of theoretical lessons and practical exercises. The participants will work with practical scenarios based on real operations, training on planning and executing specified operations under varying simulated conditions, including emergency handling

SPECIAL INFORMATION

The DP Simulator course is phase C of the Nautical Institute (NI) DP Operator Certification Scheme.

The course will be entered into the NI Dynamic  Positioning Operator’s Log Book.

CERTIFICATE

A certificate acceditated by the Nautical Institute will be issued on succcessful completion of the course.

Only in Norwegian

Etter gjennomført opplæring skal deltagerne ha kunnskaper og ferdigheter i å reagere og handle ved alarm, samt følge nødprosedyrer. Sikre effektiv evakuering av fartøyet og ivareta passasjerer og mannskap i en evakueringssituasjon.

Kursinnhold er i henhold til STCW-95, tabell A-V/2 og A-V/3.

Kursinnhold
- Organisere nødprosedyrer om bord 
- Skipets konstruksjon med muligheter og begrensninger 
- Beredskapsplaner og nødprosedyrer 
- Optimalisere bruk av ressurser 
- Ressursutnyttelse / øvelsemønstre 
- Styre tiltakene i en nødsituasjon 
- Organisasjon 
- Ledelse 
- Kommunikasjon 
- Håndtering av passasjerer og annet personell i nødsituasjoner 
- Bevissthet om allmenne reaksjonsmønstre 
- Etablere og opprettholde effektiv kommunikasjon 
- Betydningen av å etablere og opprettholde effektiv kommunikasjon 
- Praktiske øvelser 
- Gruppeoppgaver 
- Veiledning og instruksjon under vanskelige forhold

This is a course for electrical installations in potentially explosive areas.

Our goal is to make sure that employees are motivated to work safely and securely.   

Topics:

• General principles for explosion protection

• Area classification and zone division

• Gas groups and the connection between area and equipment

• Temperature classes and the connection between area and equipment

• The general principles for type of protection and labeling

Standards:

• NEK 420

• IEC / NEK EN 60079-10-1

• IEC / NEK EN 60079-14

This course is only available in Norwegian.

Objective: The purpose of the course is to provide forklift drivers with a good theoretical basic training in the safe use of forklifts, so that accidents in connection with forklift driving are avoided.

Module 1.1 - Basic theoretical module
Module 2.2 -Forklift theory
Module 3.2 - Basic practice forklift.

The course is primarily aimed at future users of forklifts. But anyone who is involved with cargo handling and forklifts in risk analysis and work management can also benefit from the course.

The course is conducted with Norwegian-language teachers and teaching materials in accordance with legislation and regulations, as well as recognized curricula for module-based training.

The forklift driver training consists of four modules:

- Module 1.1 working environment, responsibilities and consequences. *
- Module 2.2 G4 bridge and overhead crane
- Module 3.2 Basic practical training forklift 
- Module 4.2 Practical driving training forklift
- Practical Final test in each forklift type T1-T4

* Module 1.1 is common to machine, forklift and crane. If you can document that you have module 1.1 from before that is not older than 3 years, let us know.

Module 4.2 can be completed in a company using a sponsorship arrangement. If you do not have the opportunity to do so, you can participate in one of STQ's practice courses.

Content:

- Safety training, laws, regulations
- Forklift types
- Electric forklift - construction
- Stability
- Daily inspection and maintenance
- Material and goods handling
- HMS
- Proper use of the forklift
- The theory course ends with a theoretical exam

Basic first aid for the wind industry.

Upon completion of the Global Wind Organization (GWO) Basic Safety Training (BST), delegates will have awareness of the dangers that arise when working in the wind industry and how to control and reduce these dangers.

The course covers the requirements for training of personnel and refresher courses both onshore and offshore wind in accordance with:

- Global Wind Organization (GWO)

 - Labor Inspection (Regulations)

Competence for "First Aid" must be maintained in accordance with. guideline in the GWO standard. It shall be conducted refresher training every 2 years.

Norwegian only

Kurset vil gi kranoperatører en god teoretisk grunnopplæring på bro og traverskraner slik at uhell og ulykker i forbindelse med løfteoparsjoner unngås. Opplæringen gir kandidatene god innsikt i prinsippene for traverskraners konstruksjon,virkemåte, vedlikehold og bruk. Ved bestått teoretisk og praktisk prøve, vil det gi grunnlag for utstedelse av kompetansebevis G4 Bro-og traverskraner.

Kursinnhold
- G11 Stropp og anhuker opplæring (se KOL-001)
- Innledning med krav til kranførerer
- Bruksområder for traverskraner
- Ulykker med bro- og traverskraner
- Oppbygging av forskjellige typer bro- og traverskraner
- Elektrisk anlegg på bro- og traverskraner
- Sikkerhetsbrytere
- Ståltau / blokk
- Sertifisering / dokumentasjon
- Kontroll og vedlikehold, sikkerhetsregler ved bruk

- Øvingsoppgaver 

- Eksamen

Modul 1.1 (8 timer) Arbeidsmiljø, ansvar og konsekvenser

Modul 2.3 (16 timer) G11- Løfteredskap 

Modul 2.7 (16 timer) G4- Bro- og Traverskran 

Modul 3.7 - G4 (8 timer) Praktisk bruk

This course is only available in Norwegian.

Objective: The training is intended to provide personnel with good theoretical and practical basic training in the use and maintenance of steel ropes.

The course provides a thorough introduction to knowledge about steel ropes, the correct use / choice of steel ropes and what requirements are set for those who use and control steel ropes.

Regulations on the performance of work, use of work equipment and associated technical requirements (regulations on the performance of work) §10-1. Requirement for documented safety training for work equipment that requires special care during use 

When an employer after a risk assessment finds that the work equipment requires special care during use, only employees who have documented safety training according to §10-2 §10-2 can be used. Requirements for documented safety training when using work equipment

Anyone who is to use work equipment as mentioned in §10-1 and §10-3, must have practical and theoretical training that provides knowledge of construction, operation, use properties and area of use, as well as maintenance and control.

Content:

- Basic theory of steel ropes
- Construction
- Properties
- End parties
- Cast blocks / Wire discs
- The right choice of wire rope
- Proper use of wire ropes
- Proper winding and running in of steel ropes
- Maintenance of steel ropes
- Lubrication of steel ropes
- Damage to steel ropes
- Disposal rules
- Checking of wire ropes in accordance with standard ISO-4309
- Exam

One of the key responsibilities of a leader is to assess team members on a regular basis. These might include post-project reviews, annual or quarterly performance evaluations, and in-the-moment feedback.  

Organizations use different parameters and tools to assess their employees. The assessments used are based on functional goals, developmental goals, innovation goals, stretch goals, or any other goals customized to the organizational needs. Irrespective of the tools you use, when it is time to assess your employees, do you rely on the data or by your perception of the person?  

As fair and factual as you believe your assessments are, you might actually be guilty of some “rater biases” that can skew your evaluations. 

• Assess if you are too lenient or halo in your evaluations 

• Find whether your evaluations are based on recency or similarity 

• Examine if you are driven by contrast or negative bias 

• Identify the central tendency and employ a technique to be objective during your evaluations

Whether you’re publicly challenging long-held beliefs or experimenting with a new idea, it’s normal to experience fear or discomfort. You can reduce these emotions by creating a workplace that openly promotes change, welcomes honest and productive discussions, sees failure as a necessary part of business success, and rewards and supports risk taking on a daily basis. It may seem ironic, but when you instill a continuous learning culture and growth mindset in your organization, failure can actually lead to success.

• Identify methods to challenge the status quo   

• Identify reasons for bias towards encouraging smart failure and suggest solutions    

• Enlist ways of encouraging learn from failure culture