Course catalogue

Oppgradering fra Norsk Olje og Gass til IMO50 for personell som innehar Grunnleggende sikkerhetskurs for Norsk Olje og Gass (Offshore).

Kurset oppgrader personell med Grunnleggende sikkerhetskurs for Norsk Olje og Gass (Offshore) til STCW Grunnleggende sikkerhetsopplæring for sjøfolk. Kurset inneholder brannvern, røykdykking, brannslokking, sjøredning, grunnleggende førstehjelp og personlig sikkerhet og omsorg for menneskeliv og miljø. Kurset er godkjent etter IMO regelverket og gjelder hele verden.

Objective: The main goal is to provide personnel who are to perform the roles of signal transmitter, signalers and deck operator with sufficient knowledge of handling and transport of dangerous goods and hazardous waste, to be able to identify hazards and risks when handling this type of cargo, in such a way that unwanted incidents are avoided.

Safe handling and transport of dangerous goods and hazardous waste requires knowledge of hazards and risks, regulations, correct execution and safe practice during treatment and transport.

Content:

The learning process leading up to a certificate of competence is carried out to contribute to safe lifting operations, as well as to document the necessary knowledge and skills in accordance with requirements laid down in national regulations and standards.

After completion, participants must be able to identify hazards, risks, causes and consequences of accidents with dangerous goods and hazardous waste.

Participants will also be familiar with restrictions, requirements, classifications, identification, packaging, marking, documentation and handling of dangerous goods and waste.

Focus on production and processing. Upon completion of this course, participants should be able to give an account of the production process of oil and gas. They should be able to identify platform equipment, state the position, and, in principle, give an account of the workings of the production and process equipment involved.

Course Content 

Introduction:

What is produced?

- Liquids

- Gases

The production well:

The Christmas tree

The production process, main and auxiliary equipment

- Well head

- Production manifold

- Inlet separator/water separator

- De-gassing tanks

- Liquid separators

- Suction brushes

- Gas Brushes

- Compressors

- Coalescer

- Flare boom - Coolers/heat exchangers

- Pumps

- Filters

- Valves

The production process, main and auxiliary equipment, cont.:

- Measuring apparatus

- Water machines - electric boilers

- Gas treatment equipment

- Separators for gas/condensate

- Storage tanks and equipment

- Re-injection manifold

- Safety and surveillance systems

- Help systems

Production methods:

- Primary extraction

- Secondary extraction (gas/water injection)

Future production systems:

- Underwater/satellite system

The course can also be arranged internally and can be tailor-made for individual companies.

Objective: Through a combination of theory and practical training, this course provides participants with the necessary knowledge and skills required to work safely in enclosed spaces.

The Norwegian Labor Inspection Authority has made major changes to the regulations. People who work in tanks and closed rooms are the biggest difference that the regulation "Work in tanks" has fallen away. This is replaced by section 29 of the regulations «execution of work», which states that all work in closed rooms shall be performed «without danger to life or health». A simple requirement that gives the employer a great deal of responsibility.

New SOLAS requirements: Exercises in closed rooms and rescue, as well as portable gas measuring equipment.

Applies to: All ships covered by SOLAS and all high-speed vessels, mobile offshore drilling units and dynamically positioned vessels

Our courses are in accordance with SOLAS-IMO requirements and the Norwegian Labor Inspection Authority - Execution of work

The definitions of a cramped space vary from country to country, but the usual criteria usually include:

- A room that is predominantly or completely closed
- Contains health and / or safety hazards
- Is not designed for continuous stay of employees
- Has entrances or exits that are small or difficult to access
- A room that is large enough that you can enter it completely and perform the work tasks you have been assigned
- Limited air circulation

Content:

- Review of public laws and regulations
- Know which constituents a safe breathing air contains
- How to make a gas measurement before entering
- Plan entry jobs and rescue operations in closed rooms
- Equipment knowledge
- Exercises in our training tank. We practice entry and use of fall protection equipment, rescue equipment, breathing air equipment and gas meter

Only in Norwegian

Kurset dokumenterer at skipsoffiserer (dekk og maskin) har gjennomført godkjent oppdateringskurs (IMO80) minst hvert femte år.

Deltakerne skal etter endt kurs kunne

- Ta kommandoen over en redningsfarkost eller mann-overbord-båt under og etter utsetting (Tabell VI/2-1) 
- Lede brannslokningsoperasjoner om bord på skip (Tabell VI/3) 
- Gi førstehjelp omgående i tilfelle av ulykke eller sykdom om bord (Tabell VI/4-1) 
- Gi medisinsk behandling av syke og skadde mens de er om bord. Delta i samordnede opplegg for medisinsk bistand til skip (Tabell VI/4-2)

Kursinnhold
- Medisinsk førstehjelp for maskinoffiserer
- Medisinsk behandling for dekksoffiserer
- Ledelse av brannslokking
- Bruk av redningsfarkoster

Praktiske øvelser

- Dag 1: Medisinsk behandling for dekksoffiserer

- Dag 1: Medisinsk førstehjelp for maskinoffiserer
- Dag 2: Brannledelsesteori, brannøvelser og røykdykking med pressluftapparater
- Dag 3: Redningsteori og mønstring og redningsøvelser med redningsfarkoster

Grunnleggende teoretisk og generell sikkerhetsopplæring i trykktesting iht. Forskrift om utførelse av arbeid best. 703.

Kursinnhold

- Trykk og testmedier

- Materiallære

- Bolter og skruer

- Kontroll og vedlikehold

- Gjenger og koblinger

- Sikkerhet

- Høytrykkspumper og boosterpumper

- Slanger

- Valg av testutstyr

- Prosedyrer

- Måleenheter/tabeller

- Arbeidsmiljø

- Avsluttende teoretisk prøve

Only in Norwegian

Kurset gir kursdeltakerne kunnskap om ARL's funksjon og rolle, effektiv kommunikasjon, innholdet i situasjonsrapporter og observasjonsteknikker. Deltakerne lærer også hvordan man slokker mindre branntilløp, samt å utføre livreddende førstehjelp.

Kurset er i hovedsak basert på praktiske øvelser i slukking av brann, bruk av utstyr, slukkemetoder og førstehjelp.

Kursinnhold

Brann:
- Funksjon og rolle 
- Observasjonsteknikk 
- Kommunikasjon 
- Situasjonsrapport
- Slokking av branntilløp med håndslokkemateriell 
- Barrierer (tekniske, menneskelige og organisatoriske)

Førstehjelp:
- Sirkulasjon / blødninger 
- Hjerte- og lungeredning 
- Brannskader 
- Stans av blødninger
- Hode-, nakke- og ryggskader 
- Transport av skadde 
- Førstehjelp, nye momenter

Etter endt undervisning skal kursdeltakerne:
- Kjenne til ARL's funksjon og rolle
- Kunne etablere effektiv kommunikasjon 
- Kjenne til innholdet i en situasjonsrapport 
- Effektivt kunne slokke et mindre branntilløp med en håndslokkemateriell 
- Kjenne til observasjonsteknikker 
- Kunne utføre livreddende førstehjelp

LEARNING OBJECTIVES

This  course aim to provide knowledge, understanding and skills to conduct a safe and professional ship to ship (STS) transfer operations of crude oil, petroleum products, chemicals and liquefied gases, both at sea and in port.

CONTENT

• Introduction to STS
• Operation personnel
• STS Operation Procedure and Check Lists
• Interaction
• Communication
• Fenders
• Mooring
• External Forces
• Anchoring
• STS incidents

LEARNING PROCESS

The  course consists of totally nine theoretical lessons and nine selected simulator exercises. Participant  learning progress assessed by concurrent evaluation during both theory sessions and simulator exercises.

REFERENCES

OCIMF - Ship to ship transfer guide

CERTIFICATE

Certification of attendance will be issued upon successful completion of the course.

LEARNING OBJECTIVES

The objective of this course is to give the trainee DPOs as much hands-on experience as possible in the time available. This is achieved by running the candidates through intensive simulator training whilst being exposed to environmental and technical worst case scenarios. This will increase the candidate’s operational skills and knowledge in DP Operations.

CONTENT

• All the exercises are carried out on a full scale ship simulator
• DP operations planning and watch keeping procedures
• Handling of position reference systems
• Handling of various propulsion systems
• Repetition of various theoretical topics from the DPO
• Preparation and DPO Start courses upon request from course participants

LEARNING PROCESS

This course is designed to give the trainee DPO extensive hands-on training in the use of the DP in a number of varied worst case scenarios. Candidates for the DPO Experience volume training course must have completed the DPO Preparation and the DPO Start courses, or be able to document equivalent competence.

LEARNING PROCESS

This course is designed to give the trainee DPO extensive hands-on training in the use of the DP in a number of varied worst case scenarios. Candidates for the DPO Experience volume training course must have completed the DPO Preparation and the DPO Start courses, or be able to document equivalent competence.

CERTIFICATE

Certification of attendance will be issued upon successful completion of the course.