Course catalogue

Presentation

This training course provides an overview of the IACS Recommendation 47 – Shipbuilding and Repair Quality Standards.

Objectives

On completion of the training, students will be able to:

Understand the applicability of IACS Recommendation No.47.

Get familiar with materials, welding and non-destructive testing. 

Understand the quality standards for steel ship construction and remedial standards for new buildings. 

Understand the quality standards for repair of ships in operation.

Program

General requirements for new constructions and repair of ships in operation

Qualification of welders, welding procedures and NDT operators

Materials

Equivalency of material grades

Surface conditions and acceptance criteria

Shipbuilding and remedial quality standards for new constructions

o Standard for flanged longitudinals and flanged brackets

o Standard for corrugated bulkheads

o Standard for pillars, brackets and stiffeners

o Standard for hull shape

o Standard for fairness of plating between frames

o Standard for alignment and remedial standard for misalignment

o Standard for butt weld plate edge preparation and remedial standard

o Standard for fillet weld plate edge preparation and remedial standard

o Standard for distance between welds

Repair quality standards for ships in operation

o Standard for welding, groove roughness

o Standard for renewal of plates

o Standard for doublers on plating

o Standard for renewal of internals/stiffeners

o Standard for welding of pitting corrosion

o Standard for welding repair of cracks

Certificate

On completion of the training program, the student will be awarded:

A Certificate of Shipbuilding and Repair Quality Standards, issued by Bureau Veritas Solutions Marine & Offshore.

The Certificate of Shipbuilding and Repair Quality Standards is obtained after completion of the course and passing the online test.

Presentation

This training course gives a general presentation of the three Advanced NDT Methods (Time-of-Flight Diffraction (TOFD), Phased Array Ultrasonic (PAUT) and Digital Radiography (DR)), their basic principles and how the corresponding equipment should be used in accordance with the testing procedure to ensure the quality of the test performance and testing results.

Objectives

On completion of the training, students will be able to:

Understand the setup and principles of advanced NDT techniques in comparison with conventional methods.

Know the testing procedure and the inspection process referred to the equipment used.

Differentiate applications according to the advantages and limitations.

Get familiar with the aspects of test performance and obtained testing results.

Program

Time-of-flight diffraction (TOFD)

o Basic principle

o Testing procedure

o System set-up and checks

o Data interpretation and evaluation

o Acceptance levels

o Advantages and limitations

Phased Array Ultrasonic Technique (PA-UT)

o Ultrasonic phased array technology

o Phased array benefits

o Basic principle

o Testing procedure

o Settings

o PA-UT instead of RT

o Advantages and limitations

Digital Radiography (DR)

o Digital radiography techniques

o Computed radiography & direct digital radiography

o Digital image quality

o Basic principles

o Testing procedure

o Evaluation and interpretation of results

o Advantages and limitations

Applications and acceptance criteria

o Scope

o Indication evaluation

o Acceptance criteria

o Test report

Reliability, quality of test results

o UT system performance

o NDT personnel competence

Certificate

On completion of the training program, the student will be awarded:

A Certificate of NDT – Advanced Techniques, issued by Bureau Veritas Solutions Marine & Offshore.

The Certificate of NDT – Advanced Techniques is obtained after completion of the course and passing the online test.

Hensikten med kurset er å gi blivende riggere en god teoretisk grunnopplæring i sikker bruk av: Fallsikringsutstyr og enkle løfteinnretninger (enkle travers- og søylesvingkraner, håndtaljer, luft- og eltaljer og transportable vinsjer.Opplæringen gir kandidaten god innsikt i prinsippene for fallsikringsutstyrs, enkle løfteinnretningers og transportable vinsjers konstruksjon, virkemåte, bruk og vedlikehold, slik at uhell og ulykker i forbindelse med riggeoperasjoner unngås.

Deltakeren må ha fullført G11 stroppekurs før kursstart.

Opplæringen dekker den nødvendige teoretiske som er nødvendig for å kunne gjennomføre det praktiske riggekurset, Modul O 3.2.

Kurset avsluttes med en teoretisk prøve. 

Kursinnhold
- Fallsikringsutstyr
- Travers- og søyle- svingkraner
- Håndtaljer, luft- og el-taljer
- Transportable vinsjer
- Avsluttende teoretisk prøve

This course is only available in Norwegian.

This course combines self-study by e-learning and classroom training with demonstrations and examples which is useful when working in explosive atmospheres.

The concept intrinsic safety is unlike the other Ex protection concepts as it is a system concept. Therefore, it is necessary to understand the system as a whole, how the environment and individual components affect the system to maintain the integrity of the intrinsically safe system.

This course is taken externally on the Astutis platform, the delegate will receive a separate email from the provider with access details once this is processed by Astutis.

The enrolment will then be marked complete in Trainingportal once the course is passed.

Provided in association with Astutis, NEBOSH Learning Partner 807.

The NEBOSH International Diploma in Occupational Health and Safety is an advanced health and safety qualification. Equivalent to an undergraduate degree in OHS. The NEBOSH Diploma is NEBOSH's flagship qualification. It is recognised by employers and professional bodies in over 180 countries around the world!

The qualification will develop competence in all areas of health and safety so you can reduce risk in dangerous environments and keep people safe. It is the ideal course if you want a successful, long-term career in health and safety.

Unit A: Managing Health and Safety

This unit provides an in-depth understanding of the key areas for managing health and safety, covering moral, economic and societal drivers, health & safety law and health & safety management systems. 

A1-Principles of health & safety management, A2-Principles of health & safety law, A3-Criminal Law, A4-Civil Law, A5-Loss causation and incident, investigation, A6-Measuring and reviewing health and safety, A7-Identifying hazards, assessing and evaluating risk, A8-Risk control, A9-Organisational factors, A10-Human factors, A11-The role of health & safety practitioner

Unit B: Hazardous Agents in the Workplace

Unit B details all major aspects of managing chemical, biological, physical and physiological hazards in the workplace.

B1-Managing Occupational Health, B2-Identification, assessment & evaluation of hazardous substances, B3-Control of hazardous substances, B4-Monitoring and measuring, B5-Biological agents, B6-Physical agents - noise and vibration
B7-Physical agents - radiation, B8-Mental ill-health & dealing with violence & aggression at work, B9-Musculoskeletal risks and controls, B10-Work environment risks and controls

Unit C: Workplace and Work Equipment Safety

Unit C provides a thorough understanding of how to create and manage safe working environments, covering welfare, fire, dangerous substances, work equipment, electricity, construction and transport. 

C1-Workplace welfare requirements and specific workplace issues, C2-Fire and explosion, C3-Workplace fire risk assessment, C4-Storage, handling and processing of dangerous substances, C5-Work equipment (general), C6-Work equipment (workplace machinery), C7-Mobile, lifting, access and work at height equipment, C8-Electrical safety, C9-Construction & works of a temporary nature - hazards and controls, C10-Workplace transport and driving for work