Course catalogue

Who is this course for:
Maritime personnel, onshore and offshore.

Is previous experience required?
You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role.

How will this course benefit me?
The course looks at the purpose of the ISM Code, which is to maintain safety in international shipping, reduce pollution from vessels, protect the exterior environment and prevent injury or loss of human life.

How will this course benefit my company?

By ensuring you have the knowledge of the purpose of the ISM Code.

What standards are referred to in this course?

The International Convention for the Safety of Life at Sea (SOLAS)

The International Ship and Port Facility Security (ISPS) Code 

The International Convention on Standards of Training, Certification and Watchkeeping for Seafarers (STCW)

The International Safety Management (ISM) Code 

The International Convention for the Prevention of Pollution from Ships (MARPOL)

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is the course for?

Personnel who require an understanding of major accidents in the maritime industry.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course will provide you with an introduction to major accident hazards.

How will the course benefit my company?

This course will provide personnel with an introduction to major accident hazards and the role that they play in the mitigation of catastrophic events.

What standards are referenced in the course?

Safety and Environmentally Critical Elements (SECE)

ISM Code

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is the course for?

All Engineering Officers.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course will provide knowledge of isolation techniques.

How will the course benefit my company?

Improve safe isolation of systems.

What standards are referenced in the course?

This course does not refer to specific legislation or standards.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is the course for?

Deck and Engine Room Ratings and any other personnel with responsibility for carrying out surface preparation and coating applications.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

By providing an overview of the importance of preparing surfaces and coatings prior to carrying out operations and how improper preparation and application can affect the success of the protective coating.

How will the course benefit my company?

By providing personnel with an overview of the importance of preparing surfaces and coatings prior to carrying out painting operations and how improper preparation and application can affect the success of the protective coating.

What standards are referenced in the course?

This course does not refer to specific legislation or standards.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is this course for?

This course is aimed towards all personnel who use abrasive wheels in the workplace.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course aims to provide all relevant personnel with the knowledge required to understand the hazards and controls associated with the use of abrasive wheels.

How will this course benefit my company?

The course will benefit companies by providing personnel with knowledge of how to avoid risks and hazards when using abrasive wheels, subsequently reducing accidents and injuries in the workplace.

What standards are referred to in this course? 

• Provision and Use of Work Equipment Regulations (PUWER) 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is the course for?

Any officer of the watch looking for an easy-to-follow supplement or refresher to the IMO generic course (IMO Model Course 1.27) and anyone requiring knowledge of the general features of ECDIS.

Is previous experience required?

No previous experience is required to complete this course. Basic nautical knowledge including an understanding of terrestrial and electronic navigation is recommended.

How will the course benefit me?

By providing you with the general features of an ECDIS, its strengths and limitations and hands-on knowledge about the most common features and functionalities all ECDIS have.

How will the course benefit my company?

By improving the officer’s general understanding of an ECDIS as a computer-based navigation system and its role as part of a navigational watch, thus improving the performance and safety of navigation.

What standards are referenced in the course?

This course does not refer to specific legislation or standards.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is the course for?

Ratings and junior engineers new to marine engineering.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course will enable you to understand the purpose of a boiler on board and its basic requirements. It will also provide you with some basic safety knowledge.

How will the course benefit my company?

By providing your engineers and ratings with basic knowledge on boiler operations on board.

What standards are referenced in the course?

International Convention for the Safety of Life at Sea (SOLAS)

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is the course for?

Personnel that may be exposed to environments containing nitrogen.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

By providing knowledge in the risks of entering a nitrogen environment.

How will the course benefit my company?

By reducing Nitrogen exposure risks.

What standards are referenced in the course?

No standards or regulations are referenced in this course. 

Is there an assessment? 

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is this course for?
Ship's Master and Officers.

Is previous experience required?
You do not need prior knowledge or experience to complete this course.

How will this course benefit me?
This course aims to provide an overall understanding of the requirements of the Maritime Labour Convention (MLC) and the responsibilities of the ship's Master and Officers in relation to achieving, managing and maintaining compliance.

How will this course benefit my company?
By ensuring you have an understanding of the Maritime Labour Convention (MLC) and the resposibilities thereto.

What standards are referred to in this course?
Maritime Labour Convention (MLC2006)

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is this course for?

This FSE High and Low Voltage Training course is suitable for everyone working on low and high voltage installations.

Is previous experience required?

You do not need prior knowledge or experience to complete this course, but it is assumed that you are competent in your designated role.

How will this course benefit me?

The course meets the requirements set in Section 7 of the ‘Safety Regulations for Work and Operation of Electrical Equipment and Installations – FSE’ which is that all relevant personnel undertake annual training and instruction in FSE. The course also provides the necessary training and instruction in first aid, focusing on electrical injuries, with the exception of the mandatory practical training in cardiopulmonary resuscitation (CPR).

The regulations of various authorities make FSE applicable to all those working with electricity, whether on board ship, on platforms or on land. This course is suitable for all, regardless of which industry you work in.

The authorities require that training in FSE and first aid in the event of electrical accidents is undertaken at least once a year. No more than 12 months shall elapse between training courses.

How will this course benefit my company?

By ensuring you have the knowledge and competence to be working on low and high voltage installations.

What standards are referred to in this course?

• Section 7 of the ‘Safety Regulations for Work and Operation of Electrical Equipment and Installations – FSE’

• The European standard

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.