Maritime

Course catalogue

hits
54
Course code: MTP-035
Course type: E-learning course
Duration: 1 hour 10 minutes
Language: Norwegian, English, Br ...

Piracy and armed robbery is a real threat to seafarer’s onboard ships and mobile units at sea. 1st January 2014 a requirement about seafarer’s security training was put in force for all ships to which the ISPS Code applies.

This training programme in Ship Security Awareness has been approved by the Norwegian Maritime Authority. The training consists of an e-learning course and the performance of certain on board activities described in a checklist. The client’s approved instructors must sign completed checklists for each trainee.  When the training is completed a certificate is issued by the Norwegian Maritime Authority.

 

Learning Objectives in the e-learning course

- Security awareness
- International maritime security policy
- Security measures and procedures aboard
- Security threats
- After an attack
- Final test

Contact Mintra Trainingportal for more information about how to complete the training.
Course code: MTP-066
Course type: E-learning course
Duration: 10 minutes
Language: English and Norwegian

This course is designed to raise the awareness of GDPR (2018) throughout the workforce.

We will familiarise staff with the rights of individuals and the obligations of companies.

Learn which territorial areas are affected, and understand the consequences of the improper sharing of personal data, and how to deal with a data breach, should it occur.

The course content is developed in cooperation with Advokatfirmaet Schjødt AS.

 

Course code: MTP-034
Course type: E-learning course
Duration: 1 hour 30 minutes
Language: English, Norwegian

Training for all personnel who handle dangerous goods for transport at sea.

Norwegian and international authorities have demands for "general awareness/familiarisation training” for personnel involved in the transport of dangerous goods by sea. The purpose of this course is to provide sufficient training to fulfil these demands for this target group.

 

Course Content
The course content is as specified in the IMDG-code section 1.3.1.2.1:

- hazard classes
- packing
- marking and labelling
- placarding
- stowage and segregation
- documentation
- emergency procedures

Course code: MTP-063-FT
Course type: E-learning course
Duration: Approx. 2 hours
Language: English, Norwegian

The course meets the requirements set in § 7 of the "Safety Regulations for Work and Operation of Electrical Equipment and Installations- FSE", that relevant personnel shall be given annual training and instruction in FSE. The course also provides the necessary training and instruction in first aid, focusing on electrical injuries, with the exception of the mandatory practical training in cardio-pulmonary resuscitation (CPR).

The regulations of various authorities make FSE applicable to all those working with electricity, whether on board ship, on platforms or on land. This course is suitable for all, regardless of which industry you work in. 

Throughout the course the focus is on attitudes and the individual's responsibility to follow the regulations. FSE training is about acquiring knowledge about the regulations, but it is equally important for the individual to understand why we have these regulations. It is crucial to succeed in getting the individual to understand the importance of working safely, so that the electrical safety develops in the right direction and that the number of accidents is reduced.

The authorities require that training in FSE and first aid in the event of electrical accidents is undertaken at least once a year. No more than 12 months shall elapse between training courses.

The fast track version of the FSE course starts with a pre-test which checks the participant's knowledge of FSE. Depending on the answers given, the participant will get a course that is tailored to the level of knowledge revealed in the pre-test. The fast track version of the course is suitable for all but is particularly practical for those undertaking refresher training in FSE. The version without fast track may be found in the course catalogue with the course name FSE High and Low Voltage and course code MTP-063.

Course code: MTP-059
Course type: E-learning course
Duration: 30 minutes
Language: English, Norwegian

The course will make you aware of aspects relating to anti-corruption and anti-bribery and will familiarize you with the relevant legislation. During the course you will encounter common dilemmas where you will be asked to make your own decisions. The feedback in the exercises will enable you to handle various questions and tricky situations.

Course code: MTP-067
Course type: E-learning course
Duration: 30 minutes
Language: English and Norwegian

 

This course is designed to raise awareness of how organisations, and all employees in contact with personal data are affected by GDPR Legislation (2018).

The course gives an overview of definitions, roles and responsibilities, the rights of individuals and the obligations of businesses with respect to the regulation.

We examine the territorial scope and outline the general requirements, technical solutions and administrative routines required for GDPR compliance, whilst also examining how to handle the issues surrounding a data breach, should it occur.

The course content is developed in cooperation with Advokatfirmaet Schjødt AS.

 

 

Course code: MTP-063
Course type: E-learning course
Duration: Approx. 2 hours
Language: English, Norwegian

The course meets the requirements set in § 7 of the "Safety Regulations for Work and Operation of Electrical Equipment and Installations- FSE", that relevant personnel shall be given annual training and instruction in FSE. The course also provides the necessary training and instruction in first aid, focusing on electrical injuries, with the exception of the mandatory practical training in cardio-pulmonary resuscitation (CPR). 

The regulations of various authorities make FSE applicable to all those working with electricity, whether on board ship, on platforms or on land. This course is suitable for all, regardless of which industry you work in.

Throughout the course the focus is on attitudes and the individual's responsibility to follow the regulations. FSE training is about acquiring knowledge about the regulations, but it is equally important for the individual to understand why we have these regulations. It is crucial to succeed in getting the individual to understand the importance of working safely, so that the electrical safety develops in the right direction and that the number of accidents is reduced. 

The authorities require that training in FSE and first aid in the event of electrical accidents is undertaken at least once a year. No more than 12 months shall elapse between training courses.

This course does not have the fast track function with pretest. The fast track version is to be found in the course catalogue with the course name FSE High and Low Voltage (fast track) and course code MTP-063-FT.

Course code: MTP-058
Course type: E-learning course
Duration: 1 hour 10 minutes
Language: English / Norwegian

This course is approved by the Norwegian Maritime Authority (NMA).

This course will be a part of a blended learning in two stages:

-    The first stage is this e-learning course
-    The second stage will be on board training reflecting the realities on-board the vessel you are serving on. This training might take a couple of weeks or more to complete, as you will be required to participate in a number of drills.

The training will be complete when all the elements of the checklist pertaining to your designated security duties.

Completion of this course requires that you are employed in a company that has a plan in place for on board training for this kind of activities. Contact Mintra for more information about how to complete this training.

The course will not be approved for private individuals.

Course code: MTP-064-FT
Course type: E-learning course
Duration: Approx. 2 hours
Language: English, Norwegian

The course meets the requirements set in § 7 of the "Safety Regulations for Work and Operation of Electrical Equipment and Installations- FSE", that relevant personnel shall be given annual training and instruction in FSE. The course also provides the necessary training and instruction in first aid, focusing on electrical injuries, with the exception of the mandatory practical training in cardio-pulmonary resuscitation (CPR). 

The regulations of various authorities make FSE applicable to all those working with electricity, whether on board ship, on platforms or on land. This course is suitable for all, regardless of which industry you work in.  

Throughout the course the focus is on attitudes and the individual's responsibility to follow the regulations. FSE training is about acquiring knowledge about the regulations, but it is equally important for the individual to understand why we have these regulations. It is crucial to succeed in getting the individual to understand the importance of working safely, so that the electrical safety develops in the right direction and that the number of accidents is reduced. 

The authorities require that training in FSE and first aid in the event of electrical accidents is undertaken at least once a year. No more than 12 months shall elapse between training courses.

The fast track version of the FSE course starts with a pre-test which checks the participant's knowledge of FSE. Depending on the answers given, the participant will get a course that is tailored to the level of knowledge revealed in the pre-test. The fast track version of the course is suitable for all but is particularly practical for those undertaking refresher training in FSE. 

The version without fast track may be found in the course catalogue with the course name FSE Low Voltage and course code MTP-064.

Course code: MUK-137
Course type: E-learning course
Duration: 45 minutes
Language: English, Norwegian

Course goal: This course aims to increase learners’ awareness of the environmental aspects and impacts related to the Oil and Gas Industry and the actions that can be taken to minimise environmental damage.

 

Learning Objectives

LO1 Identify the main environmental issues that affect the Oil and Gas industry

LO2 Explain the importance of being an environmentally responsible company

LO3 Explain the company’s commitment to managing environmental issues

LO4 Explain the role of ISO 14001 in environmental management

LO5 Explain the role of the Regulator

LO6 Define what is meant by environmental ‘aspects’ and ‘impacts’

LO7 Identify the activities that can contribute towards atmospheric pollution 

LO8 Identify the activities that can contribute towards water pollution

LO9 Identify typical spill sources

LO10 Describe the environmental effects of chemical discharges

LO11Identify the sources and impacts of disturbance of the seabed by the Oil and Gas Industry 

LO12 Identify the sources and impacts of noise from oil and gas operations 

LO13 Identify the activities that can generate waste

LO14 Describe ways in which the impact on the environment can be minimised

 

LO15 Explain that everyone has a role to play in protecting the environment

Course code: GAS-001
Course type: Blended course
Duration: E-learning, 4 hours ...
Language: English

This course aims to enhance the capabilities of shipboard personnel who sail on ships using LFF (low flashpoint fuel) as propulsion energy. It focuses on the responsibilities of all personnel serving on these kinds of ships.

 1st January 2017 the IGF Code was made mandatory and STCW now includes new minimum requirements for the training and qualifications of personnel on ships subject to the IGF Code. This training program has been approved by the Norwegian Maritime Authority. The training consists of an e-learning course, practical assessment at a facility center and a classroom exam. When the training is completed a course diploma is issued. 

The practical training takes place at facilities located in various parts of Norway and abroad. Please choose the most convenient training for yourself or your employees. It is possible for our instructors to perform the practical assessment on the premises of a client. Should this be of interest please contact us on: post@gassteknikk.no

 

 

Course code: MTP-061
Course type: E-learning course
Duration: 30 minutes
Language: English, Norwegian

The Code of Conduct course provides an overview of the common values that govern responsible corporate practice and personal behaviour in a company. The course will identify the responsibilities of employees and our common responsibilities toward each other in the workplace. You will learn about applicable laws on human rights, equality, discrimination and corruption. During the course, you will be asked to make your own decisions in relevant dilemmas involving sexual harassment, bullying, discrimination and corruption.

Course code: MTP-062
Course type: E-learning course
Duration: 30 minutes
Language: English, Norwegian

This course provides an overview of common corporate sustainability approaches and identifies the social, environmental and corporate governance aspects that should be considered during business operations. The course also identifies the human rights that are at risk of infringement in the work environment, and you will be aware of the global presence of modern-day slavery. During the course, you will be asked to make your own decisions in relevant dilemmas involving environmental criminality, corruption and breaches of labour rights.

Course code: MGM-007
Course type: E-learning course
Duration: 40 minutes
Language: English

Course Goal: This course aims to provide learners with an introduction to cyber-security and cyber-risks, and how by improving personal awareness of cyber-risks can improve cyber-security overall.

 

Learning Objectives:

- Describe the term cyber-security and recognise how cyber-security starts with “you”

- Explain the threat of cyber-crime and the possible outcomes of an attack

- Describe cyber-security laws and regulations

- Describe possible cyber-threats

- Describe best practices to reduce cyber-risk

Course code: MUK-018
Course type: E-learning course
Duration: 30 minutes
Language: English

This course aims to provide all relevant personnel with the knowledge required to understand the hazards and controls associated with the use of abrasive wheels.

Course Content
-Explain what is meant by the term ‘Abrasive Wheel’
-Explain the legislative requirements for abrasive wheels
-Give examples of different types of abrasive wheels
-Explain how abrasive wheels operate
-Explain the importance of using guards during grinding operations
-Explain the requirements for portable and hand-held grinding machines
-Explain the main hazards of grinding operations
-Give examples of common problems faced when using abrasive wheels
-Explain what the PPE requirements are during grinding operations
-Identify the safety measures that must be in place during grinding operations

Course code: MTP-064
Course type: E-learning course
Duration: Approx. 2 hours
Language: English, Norwegian

The course meets the requirements set in § 7 of the "Safety Regulations for Work and Operation of Electrical Equipment and Installations- FSE", that relevant personnel shall be given annual training and instruction in FSE. The course also provides the necessary training and instruction in first aid, focusing on electrical injuries, with the exception of the mandatory practical training in cardio-pulmonary resuscitation (CPR). 

The regulations of various authorities make FSE applicable to all those working with electricity, whether on board ship, on platforms or on land. This course is suitable for all, regardless of which industry you work in.  

Throughout the course the focus is on attitudes and the individual's responsibility to follow the regulations. FSE training is about acquiring knowledge about the regulations, but it is equally important for the individual to understand why we have these regulations. It is crucial to succeed in getting the individual to understand the importance of working safely, so that the electrical safety develops in the right direction and that the number of accidents is reduced. 

The authorities require that training in FSE and first aid in the event of electrical accidents is undertaken at least once a year. No more than 12 months shall elapse between training courses.

This course does not have the fast track function with pretest. The fast track version is to be found in the course catalogue with the course name FSE Low Voltage (fast track) and course code MTP-064-FT.

Course code: MTP-040
Course type: E-learning course
Duration: 45 minutes
Language: English, Norwegian

The course looks at the purpose of the ISM code which is to maintain safety in international shipping, reduce pollution from vessels, protect the exterior environment and prevent injury or loss of human life.

The course covers the following subjects:

- What is the ISM code?
- Who does the ISM code apply to?
- Audits
- Applicable conventions and regulations
- The ISM code documented
- The ISM code in the management system
- The purpose of the ISM code
- Deviation management
- The ISM code structure
- The Master’s responsibility
- The Company’s responsibility
- Governing documentation
- Reporting and assessment of deviations
- Maintenance and certification

Course code: MUK-186
Course type: E-learning course
Duration: 45 minutes
Language: English

Course Goal: This course aims to provide all learners with an introduction to industry best practice in relation to food safety, health and hygiene.

 

Target Audience: All relevant personnel

 

Learning Objectives:

LO1 Explain the importance of health and hygiene

LO2 Explain the importance of food safety

LO3 Give examples of foodborne illnesses

LO4 Explain the importance of maintaining high standards of personal hygiene when working with food

LO5 Identify good housekeeping practices within food preparation and service areas

LO6 Provide an overview of the Hazard Analysis Critical Control Point (HACCP) food management system and appropriate food storage

LO7 Provide an overview of appropriate temperature control

Course code: MTP-073
Course type: E-learning course
Duration: 30 Minutes
Language: English (US)

This course aims to provide learners with an awareness of US best practice in relation to the values that govern responsible corporate practice and personal behaviors in the workplace.

 

The Code of Conduct course provides an overview of the common values that govern responsible corporate practice and personal behaviour in a company. The course will identify the responsibilities of employees and our common responsibilities toward each other in the workplace. You will learn about applicable laws on human rights, equality, discrimination and corruption. During the course, you will be asked to make your own decisions in relevant dilemmas involving sexual harassment, bullying, discrimination and corruption.

Course code: MGM-002
Course type: E-learning course
Duration: 1 hour
Language: English

Course Goal: This course aims to introduce, develop and increase learners’ knowledge and awareness of the importance of Risk Assessment and how it can reduce the likelihood of accidents in the workplace.

 

Learning Objectives:

 

IT’S ABOUT YOU

- LO1 Recognise the importance of risk assessment before every job
- LO2 Recognise the importance of people in preventing accidents 

 

THEORY

- LO3 Describe the International Safety Management (ISM) Code requirements for maritime risk assessment
- LO4 Recognise and explain common risk assessment terminology
- LO5 Explain the requirements of the risk assessment team

 

RISK MANAGEMENT PROCESS

- LO6 Describe different risk assessment methods
- LO7 Describe the principles and steps of risk management
- LO8 Describe important elements in identifying hazards
- LO9 Identify common, industry-specific hazards
- LO10 Explain how to use a Risk Matrix to establish and evaluate the level of risk
- LO11 Explain how to identify appropriate control measures based on the Hierarchy of Control
- LO12 Explain what is meant by ‘Initial Risk’ and ‘Residual Risk’
- LO13 Describe how monitoring and review of the risk assessment is an ongoing process
- LO14 Explain the importance of communicating the outcomes of a risk assessment  
- LO15 Identify a typical Risk Assessment form    
- LO16 Describe the importance of ensuring that the risk assessment is up-to-date

 

OTHER APPROACHES

- LO17 Describe the Bow-tie diagram
- LO18 Describe Job Safety Analysis
- LO19 Identify situations where ‘Stopping the Job’ may apply
- LO20 Recognise the importance of communicating ‘Lessons Learned’

Hits per page