Course catalogue

This course aims to provide all relevant personnel with the knowledge required to understand the hazards and controls associated with the use of abrasive wheels.

Learning Objectives

- Explain what is meant by the term ‘Abrasive Wheel’

- Describe typical regulatory requirements for abrasive wheels

- Give examples of different types of abrasive wheels

- Explain how abrasive wheels operate

- Explain the importance of using guards during grinding operations

- Explain the requirements for portable and hand-held grinding machines

- Explain the main hazards of grinding operations

- Give examples of common problems faced when using abrasive wheels

- Explain what the PPE requirements are during grinding operations

- Identify the safety measures that must be in place during grinding operations

Who is the course for?

All personnel who have a role in preparing and executing a medical evacuation.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course will give learners an awareness in relation to conducting an emergency evacuation for medical reasons in a safe manner.

How will the course benefit my company?

The course will ensure that learners are following best practice as detailed in national/international legislation, and company procedures.

What standards are referenced in the course?

International Safety Management (ISM) Code 

• The International Convention for the Safety of Life at Sea (SOLAS) 

• The Maritime Labour Convention (MLC)

• International Convention on Standards of Training, Certification and Watchkeeping for Seafarers (STCW)

Is there an assessment? 

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is the course for?

All maritime personnel

Is previous experience required?

You do not previous experience to complete this course.

How will the course benefit me?

By providing you with an awareness of how loud noise can have a detrimental effect on your hearing

How will the course benefit my company?

By protecting personnel from hearing loss and improving communication

What standards are referenced in the course?

Maritime Labour Convention (MLC)

UK Maritime and Coastguard Agency’s Code of Safe Working Practices for Seamen.

Is there an assessment?

Yes

Who is this course for?

This course aims to provide learners with an awareness of US best practice in relation to the values that govern responsible corporate practice and personal behaviors in the workplace.

Is previous experience required?

No previous experience is required. 

How will this course benefit me?

The Code of Conduct course provides an overview of the common values that govern responsible corporate practice and personal behaviour in a company. The course will identify the responsibilities of employees and our common responsibilities toward each other in the workplace. 

You will learn about applicable laws on human rights, equality, discrimination and corruption. During the course, you will be asked to make your own decisions in relevant dilemmas involving sexual harassment, bullying, discrimination and corruption.

How will this course benefit my company?

By ensuring that all personnel are familiar with applicable laws on human rights, equality, discrimination and corruption.

What standards are referred to in this course?

Civil Rights Act 1964

UK Equality Act 2010

The US Foreign Corrupt Practices Act 

The UK Bribery Act 2010

International Labour Organization (ILO)

Is there an assessment?

Yes

Who is this course for?

All relevant personnel.

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?

This course aims to provide an overview of an employees right to implement their 'Stop Work Authority'. This course in Stop Work Authority is divided into and covers the following topics: Imminent danger, stop work procedure, right to refuse work and unsafe conditions.

How will this course benefit my company?

By ensuring you are aware of an employees right to omplement their 'Stop Work Authority'.

What standards are referred to in this course?

N/A

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 100%.

Who is this course for?
This Personnel Transfer & Evacuation (US) course is suitable for all relevant offshore personnel.

Is previous experience required?
You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role.

How will this course benefit me?
This course aims to provide an overview of US best practice in relation to the transfer and evacuation of personnel. This course in Personnel transfer and evacuation is divided into and covers the following topics: Pre transport offshore, vessel transport offshore, helicopter transport offshore and evacuation offshore.

How will this course benefit my company?

By ensuring you are aware of the US best practice in relation to the transfer and evacuation of personnel.

What standards are referred to in this course?
N/A

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is the course for?

All maritime personnel involved in the management of change process.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course will provide you with an overview of the management of change process.

How will the course benefit my company?

This course will provide personnel with an overview of the steps involved in the management of change process, the roles and responsibilities of personnel, the risks involved in change management and how these risks can be controlled.

What standards are referenced in the course?

This course does not refer to specific legislation or standards.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is the course for?

Engineers of all grades.

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role.

How will the course benefit me?

By providing you with an overview of potable water systems.

How will the course benefit my company?

This course aims to provide personnel with an overview of the safe use and maintenance of potable water systems.

What standards are referenced in the course?

This course does not refer to specific legislation or standards.

Is there an assessment? 

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is the course for?

All Maritime personnel.

Is previous experience required?

Previous experience is not required to complete this course.

How will the course benefit me?

By providing you with an overview of Safety Data Sheets (SDS) and how to use them.

How will the course benefit my company?

By increasing personnel’s awareness of the safe use and storage of hazardous substances.

What standards are referenced in the course?

• The Globally Harmonized System of Classification and Labelling of Chemicals (GHS)

• International Maritime Dangerous Goods (IMDG) Code and MARPOL Annex III

• The Registration, Evaluation, Authorisation and restriction of CHemicals (REACH) Regulation

• The Control of Substances Hazardous to Health (COSHH) Regulations

• European Agreement concerning the International Carriage of Dangerous Goods by Road (ADR)

• International Maritime Dangerous Goods (IMDG) Code

• International Air transport Association (IATA), and

• Carriage of Dangerous Goods and Use of Transportable Pressure Equipment Regulations (CDG)

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is the course for?

All Maritime personnel who require knowledge of Legionella bacteria.

Is previous experience required?

No prior knowledge or experience is required to complete this course.

How will the course benefit me?

To provide learners with knowledge of Legionella and the methods to reduce the risk of infection.

How will the course benefit my company?

To provide guidance on how to reduce legionella infections.

What standards are referenced in the course?

No standards of regulations are referenced in this course.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is this course for?

All shipboard and shore-based personnel requiring an understanding of a vessel’s statical stability.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

By providing you with a basic understanding of the principles of ship stability.

How will this course benefit my company?

By ensuring personnel are aware of the ship’s stability and the factors influencing stability in order to minimise incidents.

What standards are referred to in this course?

None

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is this course for?

All seafarers, shipboard or shore-based office personnel who require an introduction to ship stability. 

Is previous experience required?

No previous experience is required. 

How will this course benefit me?

By providing learners with a basic understanding of the principles of ship stability.

How will this course benefit my company?

By increasing company personnel’s awareness and understanding of ship stability and thus decreasing the chance of related incidents.

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Stress is our body's way of responding to physical, emotional, or mental demands. Although typically associated with negative circumstances, stress can be caused by both good and bad experiences. Our bodies react to stress by releasing chemicals into the blood to give us energy and strength to handle the situation. This evolutionary reaction can be a good thing when stress is caused by real physical danger; however, this survival response can wreak havoc if it builds up without a proper outlet. This interactive online course discusses signs and symptoms of stress, and explains the physical and emotional effects of built up stress, such as pain and anxiety. The course also describes stress management techniques, treatment options, and lifestyle changes to help alleviate stress.

Who is this course for?
All relevant personnel.

Is previous experience required?
You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?
This course aims to provide personnel with an overview of how the Working Time Regulations impact on their working hours and the importance of effectively managing and assess the risks posed by fatigue in the workplace.

How will this course benefit my company?
By ensuring you have an overview of how the Working Time Regulations impact on their working hours and the importance of effectively managing and assess the risks posed by fatigue in the workplace.

What standards are referred to in this course?
N/A

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Provided in association with Astutis, approved centre 1857.

IOSH Managing Safely is a basic risk management health and safety certificate which will offer managers an understanding of the practical actions needed for the health and safety of their teams.

It enables organizations to demonstrate a commitment to health and safety standards by ensuring managers and supervisors are aware of their responsibilities and the positive actions they can take to ensure a safe a healthy working environment.

On completion of the course, learners will be able to:

• Understand your responsibilities for safety in the workplace.

• Recognise common workplace hazards and implement appropriate control measures.

• Estimate, evaluate and reduce risk by applying a hierarchy of risk control.

• Undertake structured risk assessments and accident investigations.

• Understand the requirements of HSE legislation.

• Recognise different ways to measure and improve health and safety performance.

Who is the course for?

All offshore and onshore personnel who require an awareness of the hazards involved in working at height.

Is previous experience required?

No previous experience is required to complete this course.  

How will the course benefit me?

By increasing your awareness of the potential hazards of working at height and the steps that can be taken to reduce your risk of injury.

How will the course benefit my company?

This course is aligned to industry best practice and aims to make personnel aware of the protentional hazards of working at height and the controls that can be implemented to reduce risk.

What standards are referenced in the course?

Work at Height Regulations

Is there an assessment? 

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Course Goal: This course aims to provide an overview of management of change. The course focuses on the steps of the management of change process, the roles and responsibilities of personnel, and the risks involved in change management and their associated control measures.

Learning Objectives:

LO1 Explain why the effective management of change is an essential part of operations in the Oil and Gas Industry

LO2 Define ‘change’

LO3 Describe the key stages in the management of change process 

LO4 Identify the key roles and responsibilities involved in effective management of change 

LO5 Identify the risks associated with management of change

LO6 Explain how the risks associated with management of change can be managed

Provided in association with Astutis, NEBOSH Learning Partner 807.

The NEBOSH International Diploma in Occupational Health and Safety is an advanced health and safety qualification. Equivalent to an undergraduate degree in OHS. The NEBOSH Diploma is NEBOSH's flagship qualification. It is recognised by employers and professional bodies in over 180 countries around the world!

The qualification will develop competence in all areas of health and safety so you can reduce risk in dangerous environments and keep people safe. It is the ideal course if you want a successful, long-term career in health and safety.

Unit A: Managing Health and Safety

This unit provides an in-depth understanding of the key areas for managing health and safety, covering moral, economic and societal drivers, health & safety law and health & safety management systems. 

A1 - Principles of health & safety management

A2 - Principles of health & safety law

A3 - Criminal Law

A4 - Civil Law

A5 - Loss causation and incident investigation

A6 - Measuring and reviewing health and safety           

A7 - Identifying hazards, assessing and evaluating risk

A8 - Risk control

A9 - Organisational factors

A10 - Human factors

A11 - The role of health & safety practitioner

Unit B: Hazardous Agents in the Workplace

Unit B details all major aspects of managing chemical, biological, physical and physiological hazards in the workplace.

B1 - Managing Occupational Health

B2 - Identification, assessment & evaluation of hazardous substances

B3 - Control of hazardous substances

B4 - Monitoring and measuring

B5 - Biological agents

B6 - Physical agents - noise and vibration

B7 - Physical agents - radiation

B8 - Mental ill-health & dealing with violence & aggression at work

B9 - Musculoskeletal risks and controls

B10 - Work environment risks and controls

Unit C: Workplace and Work Equipment Safety

Unit C provides a thorough understanding of how to create and manage safe working environments, covering welfare, fire, dangerous substances, work equipment, electricity, construction and transport. 

C1 - Workplace welfare requirements and specific workplace issues

C2 - Fire and explosion

C3 - Workplace fire risk assessment

C4 - Storage, handling and processing of dangerous substances

C5 - Work equipment (general)

C6 - Work equipment (workplace machinery)

C7 - Mobile, lifting, access and work at height equipment

C8 - Electrical safety 

C9 - Construction & works of a temporary nature - hazards and controls

C10 - Workplace transport and driving for work

Provided in association with Astutis, NEBOSH Learning Partner 807.

The NEBOSH International General Certificate in Occupational Health and Safety (IG) is one of the leading health and safety qualifications recognized globally.  It helps develop your understanding of general workplace issues and how they can be applied in different sectors around the world.

The new NEBOSH International Certificate focuses on the role of a real-life health and safety professional. It looks at the real, everyday risks that people encounter and how to manage them to help protect people and profits. 

You'll develop the essential risk management skills to create a safe and healthy workplace. And, you’ll have the foundation knowledge to make recommendations to your employer to help them improve health and safety management.

Upon completion of this course, learners will be able to:

• Justify health and safety improvements using moral, financial and legal arguments

• Advise on the main duties for health and safety in the workplace and help their organisation manage contractors

• Work within a health and safety management system, recognising what effective policy, organisational responsibilities and arrangements should look like

• Positively influence health and safety culture and behaviour to improve performance in their organisation

• Do a general risk assessment in their own workplace – profiling and prioritising risks, inspecting the workplace, recognising a range of common hazards, evaluating risks (taking account of current controls), recommending further control measures, planning actions

• Recognise workplace changes that have significant health and safety impacts and effective ways to minimise those impacts

• Develop basic safe systems of work (including taking account of typical emergencies) and knowing when to use permit-to-work systems for special risks

• Take part in incident investigations

• Help their employer to check their management system effectiveness – through monitoring, audits and reviews

Provided in association with Astutis, approved centre 1857.

IOSH Working Safely is an essential short course for employees of organisations in any industry sector who need a grounding in health and safety. 

Provides an awareness of general workplace hazards and focuses on why health and safety is important to the well-being of the individual worker and those around them.

On completion of the course, learners will be able to:

• Why staff must work safely

• Staff's responsibility towards health, safety and wellbeing

• The difference between hazards and risks

• Hazard and risk identification, impact and how to control them

• The importance of safety performance within the workplace and how to improve it

• How industry affects the environment