Course catalogue

Who is the course for?

Deck and Engine Room Ratings and any other personnel with responsibility for carrying out surface preparation and coating applications.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

By providing an overview of the importance of preparing surfaces and coatings prior to carrying out operations and how improper preparation and application can affect the success of the protective coating.

How will the course benefit my company?

By providing personnel with an overview of the importance of preparing surfaces and coatings prior to carrying out painting operations and how improper preparation and application can affect the success of the protective coating.

What standards are referenced in the course?

This course does not refer to specific legislation or standards.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is the course for?

Officers and Electrical Ratings working on low and high voltage installations.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course will give learners an overview of working on electrical installations.

How will the course benefit my company?

By ensuring you have the knowledge and competence to be working on low and high voltage installations.

What standards are referenced in the course?

Safety Regulations for Work and Operation of Electrical Equipment and Installations.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is the course for?

Personnel that may be exposed to environments containing nitrogen.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

By providing knowledge in the risks of entering a nitrogen environment.

How will the course benefit my company?

By reducing Nitrogen exposure risks.

What standards are referenced in the course?

No standards or regulations are referenced in this course. 

Is there an assessment? 

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is the course for?

Junior Engineers and Electro-tech Officers, Engineering and Electrical Ratings, Engineering and Electrical cadets.

Is previous experience required?

Basic maritime electrical engineering knowledge is recommended.

How will the course benefit me?

The course is designed to enable you to understand the basics around auxiliary generators and their uses.

How will the course benefit my company?

The course will provide the learners with basic knowledge about auxiliary generators and their uses.

What standards are referenced in the course?

IMO SOLAS 1974

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is this course for?

Maritime personnel who require an introduction to or awareness of vessel structures and potential risk factors.

Is previous experience required?

You do not need prior knowledge or experience to complete this course. 

How will this course benefit me?

This course aims to provide crewmembers with an understanding of the structural risk factors and forces acting internally and externally on a vessel.

How will this course benefit my company?

By ensuring you have an understanding of the structural risk factors on a vessel. 

What standards are referred to in this course?

This course does not refer to specific legislation or standards but is written according to industry best practice.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

This course aims to provide all relevant personnel with the knowledge required to understand the hazards and controls associated with the use of abrasive wheels.

Learning Objectives

- Explain what is meant by the term ‘Abrasive Wheel’

- Describe typical regulatory requirements for abrasive wheels

- Give examples of different types of abrasive wheels

- Explain how abrasive wheels operate

- Explain the importance of using guards during grinding operations

- Explain the requirements for portable and hand-held grinding machines

- Explain the main hazards of grinding operations

- Give examples of common problems faced when using abrasive wheels

- Explain what the PPE requirements are during grinding operations

- Identify the safety measures that must be in place during grinding operations

Who is the course for?

All ship personnel preparing, conducting, or supervising the inspection of a ballast tank.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

By providing learners with the knowledge for a safe and successful ballast tank inspection.

How will the course benefit my company?

By ensuring ship personnel take the necessary safety precautions to avoid incidents during tank inspection and by providing them with the required knowledge to identify and record any issues with the inspected tank.

What standards are referenced in the course?

International Convention for the Safety of Life at Sea (SOLAS)

International Safety Management Code (ISM)

ISO 4628 Paint and varnishes

ASTM D610 Standard Practice for Evaluating Degree of Rusting on Painted Steel Surfaces

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is the course for?

Ratings and junior engineers new to marine engineering.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course will enable you to understand the purpose of a boiler on board and its basic requirements. It will also provide you with some basic safety knowledge.

How will the course benefit my company?

By providing your engineers and ratings with basic knowledge on boiler operations on board.

What standards are referenced in the course?

International Convention for the Safety of Life at Sea (SOLAS)

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is the course for?

Any officer of the watch looking for an easy-to-follow supplement or refresher to the IMO generic course (IMO Model Course 1.27) and anyone requiring knowledge of the general features of ECDIS.

Is previous experience required?

No previous experience is required to complete this course. Basic nautical knowledge including an understanding of terrestrial and electronic navigation is recommended.

How will the course benefit me?

By providing you with the general features of an ECDIS, its strengths and limitations and hands-on knowledge about the most common features and functionalities all ECDIS have.

How will the course benefit my company?

By improving the officer’s general understanding of an ECDIS as a computer-based navigation system and its role as part of a navigational watch, thus improving the performance and safety of navigation.

What standards are referenced in the course?

This course does not refer to specific legislation or standards.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is the course for?

All crew/personnel who are involved in the bunkering of LNG as a fuel.

Is previous experience required?

No previous knowledge is required to complete this course.

How will the course benefit me?

This course will give learners an awareness of LNG bunkering, including the hazards involved and the emergency and firefighting methods and procedures.

How will the course benefit my company?

The course will ensure that learners are following best practices as detailed in national/international legislation and company procedures.

What standards are referenced in the course?

International Safety Management (ISM) Code – safety and pollution prevention, emergency procedures including safe operation of equipment, training, and planned maintenance

International Convention for the Safety of Life at Sea (SOLAS) and Class Requirement

International Code of Safety for Ship Using Gases or Other Low-flashpoint Fuels (IGF Code)

The International Code of the Construction and Equipment of Ships carrying Liquefied Gases in Bulk (IGC Code)

International Convention for the Prevention of Pollution from Ships (MARPOL)

International Convention on Standards of Training, Certification and Watchkeeping for Seafarers 1978 (STCW)

International Safety Guide for Oil Tankers and Terminals (ISGOTT 6) Chapter 24

International Code for the Construction and Equipment of Ships Carrying Liquefied Gases in Bulk (Gas Carrier Code)

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is the course for?

Officer Cadets and Junior Deck Officers.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

By providing an insight into the various types of cargo insulation.

How will the course benefit my company?

By ensuring personnel understand safe operations on board a gas carrier.

What standards are referenced in the course?

The International Code for the Construction and Equipment of Ships Carrying Liquefied Gases in Bulk (IGC Code)

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

What is the duration of the course?

90 minutes + Onboard Exercises / Checklist

Who is this course for?

All ship crew with emergency duties.

Is previous experience required?

You do not need prior knowledge or experience to complete this course. 

How will this course benefit me?

This course aims to provide learners with a refresher of safe practices and the relevance of human factors of crowd and crisis management.

How will this course benefit my company?

By ensuring you have  a refresher of safe practices and the relevance of human factors of crowd and crisis management.

What standards are referred to in this course?

STCW A-V/2, Chapter V, Tables 1 and 2

SOLAS

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is the course for?

All crew with responsibility for assisting with crowd and crisis management during an emergency.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course will give learners an overview of crowd and crisis management during an emergency.

How will the course benefit my company?

By ensuring personnel are aware of how they should respond in an emergency to ensure passenger safety.

What standards are referenced in the course?

• The International Convention for the Safety of Life at Sea (SOLAS) 

• The International Maritime Dangerous Goods (IMDG) Code

• The International Convention for the Provention of Pollution from Ships (MARPOL)

• Cargo Stowage and Securing (CSS) Code

• International Convention on Standards of Training, Certification and Watchkeeping for Seafarers (STCW)

Is there an assessment? 

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is the course for?

Engineers.

Is previous experience required?

You do not need prior knowledge or experience to complete this course.

How will the course benefit me?

This course will provide you with an awareness of how a hydraulic system operates.

How will the course benefit my company?

It is intended to provide the knowledge to carry out maintenance of the systems which will help reduce accident.

What standards are referenced in the course?

This course does not refer to specific legislation or standards.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is the course for?

All personnel involved in Marine maintenance activities.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course will provide information on how to reduce corrosion in the Maritime Industry.

How will the course benefit my company?

By reducing equipment failures due to corrosion.

What standards are referenced in the course?

No standards or regulations are referenced in this course.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is this course for?

This FSE High and Low Voltage Training course is suitable for everyone working on low and high voltage installations.

Is previous experience required?

You do not need prior knowledge or experience to complete this course, but it is assumed that you are competent in your designated role.

How will this course benefit me?

The course meets the requirements set in Section 7 of the ‘Safety Regulations for Work and Operation of Electrical Equipment and Installations – FSE’ which is that all relevant personnel undertake annual training and instruction in FSE. The course also provides the necessary training and instruction in first aid, focusing on electrical injuries, with the exception of the mandatory practical training in cardiopulmonary resuscitation (CPR).

The regulations of various authorities make FSE applicable to all those working with electricity, whether on board ship, on platforms or on land. This course is suitable for all, regardless of which industry you work in.

The authorities require that training in FSE and first aid in the event of electrical accidents is undertaken at least once a year. No more than 12 months shall elapse between training courses.

How will this course benefit my company?

By ensuring you have the knowledge and competence to be working on low and high voltage installations.

What standards are referred to in this course?

• Section 7 of the ‘Safety Regulations for Work and Operation of Electrical Equipment and Installations – FSE’

• The European standard

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is the course for?

Chief, Deck and Engine Officers

New departmental staff, crew members (both offshore and onshore)

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course will give you an overview of cargo operations and procedures for cargo handling and precautions at tanker and terminal.

How will the course benefit my company?

Raising awareness of precautions at tanker and terminal and providing the crew with clear procedures for cargo handling can reduce the risk of unwanted tanker operation incidents.

What standards are referenced in the course?

STCW 78 AND 1995 revised

MCA 2006

IMO / ISGOTT / COSWP

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is this course for?

All personnel involved in marine operations.

Is previous experience required?

No experience is required to take this course.

How will this course benefit me?

By ensuring you know how to respond to marine trash and debris incidents.

How will this course benefit my company?

By ensuring you know how to respond to marine trash and debris incidents.

What standards are referred to in this course?

US best practise.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is the course for?

All crew and personnel who operate and carry out maintenance on deck machinery.

Is previous experience required?

It would be an advantage, however, this course acts as a valuable introduction for personnel that are about to be trained in deck machinery and for those working onshore.

How will the course benefit me?

This course will give learners an awareness of deck machinery, how the equipment is used correctly and safely and how the equipment is maintained.

How will the course benefit my company?

The course will ensure that learners are following best practice as detailed in relevant legislation as well as the company procedures.

What standards are referenced in the course?

• International Safety Management (ISM) Code – safety and pollution prevention, emergency procedures including safe operation of equipment, training, and planned maintenance.

• The International Convention for the Safety of Life at Sea (SOLAS) and Class Requirements

• Code of Safe Working Practices for Merchant Seafarers (COSWP)

Is there an assessment? 

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is the course for?

Maintenance crew.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

By providing you with an awareness of pump construction and operation.

How will the course benefit my company?

By providing personnel with an awareness of pump construction and operation to ensure that pumps are maintained in a good condition

What standards are referenced in the course?

This course does not refer to specific legislation or standards.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.