Course catalogue

Who is the course for?

Maritime personnel, onshore and offshore

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will the course benefit me?

The course looks at the purpose of the ISM code which is to maintain safety in international shipping, reduce pollution from vessels, protect the exterior environment and prevent injury or loss of human life.

How will the course benefit my company?

By ensuring you have the knowledge of the purpose of the ISM code.

What standards are referenced in the course?

ISM code

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is this course for?
Any members of management, supervisor and shipboard management responsible for ballast water.

Is previous experience required?
You do not need any prior knowledge or experience to complete this course.

How will this course benefit me?
The primary goal of this course are awareness and knowledge of Ballast Water Management in accordance with the International Convention for the Control and Management of Ships' Ballast Water and Sediments, referred to as the BWM Convention.

How will this course benefit my company?
By ensuring you are familiar with the best practices related to Ballast Water Management.

What standards are referred to in this course?
In compliance with IMOs Ballast Water Management Convention (BWMC) 2004 and industry best practice, and complying with US trade and US Coast Guard.

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is the course for?

Personnel who require knowledge on the types of gases found in the Maritime Industry and how these gases are detected and measured. 

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course will provide you with an overview of the types of gases found within the Maritime Industry and how these gases are detected and measured.

How will the course benefit my company?

This course will provide personnel with an overview of the types of gases found within the Maritime Industry and how these gases are detected and measured.

What standards are referenced in the course?

International Safety Guide for Oil Tankers and Terminals (ISGOTT)

International Maritime Dangerous Goods Code

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is this course for?

Everyone working on low and high voltage installations.

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?

The course meets the requirements set in § 7 of the ""Safety Regulations for Work and Operation of Electrical Equipment and Installations- FSE"", that relevant personnel shall be given annual training and instruction in FSE. The course also provides the necessary training and instruction in first aid, focusing on electrical injuries, with the exception of the mandatory practical training in cardio-pulmonary resuscitation (CPR).

The regulations of various authorities make FSE applicable to all those working with electricity, whether on board ship, on platforms or on land. This course is suitable for all, regardless of which industry you work in. 

The authorities require that training in FSE and first aid in the event of electrical accidents is undertaken at least once a year. No more than 12 months shall elapse between training courses.

How will this course benefit my company?

By ensuring you have the knowledge and competence to be working on low and high voltage installations.

What standards are referred to in this course?

 § 7 of the ""Safety Regulations for Work and Operation of Electrical Equipment and Installations- FSE""

Is there an assessment?

The fast track version of the FSE course starts with a pre-test which checks the participant's knowledge of FSE. Depending on the answers given, the participant will get a course that is tailored to the level of knowledge revealed in the pre-test. The fast track version of the course is suitable for all but is particularly practical for those undertaking refresher training in FSE. 

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is the course for?

All personnel involved in lifting operations.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course will provide you with an overview of the Banksman and Slinger roles, and how to carry out lifting operations safely.

How will the course benefit my company?

This course will provide personnel with an overview of the Banksman and Slinger roles, to help ensure that lifting operations are carried out safely.

What standards are referenced in the course?

This course does not refer to specific legislation or standards.

Is there an assessment? 

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is this course for?

This HSE Chemicals training course is for personnel who require an introduction to or awareness of working with chemicals in the oil and gas industry.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

The course is for all those who work with or can come in contact with chemicals. The course is also intended for those who work on a general basis with workplace environment issues, purchasing, or transportation. The course will give the target group fundamental knowledge of safe use of chemicals.

How will this course benefit my company?

By ensuring you have fundamental knowledge of the safe use of chemicals.

What standards are referred to in this course?

• REACH

• The Working Environment Act 

• The Product Control Act 

• The Pollution Control Act

• The Chemical Labelling Regulations

• Regulations relating to Organisation, Management and Participation

• The Internal Control Regulations

• Performance of Work Regulations

• The Product Control Regulations

Is there an assessment?

Yes

Who is this course for?

This course is for all personnel who use the navigation systems aboard a vessel. 

Is previous experience required?

No previous experience is required to complete this course. 

How will this course benefit me?

This course aims to provide learners with an overview of the practical issues surrounding the use of ECDIS.

How will this course benefit my company?

The course will benefit companies by ensuring that all relevant personnel understand the fundamentals of ECDIS.

What standards are referred to in this course?

The International Safety Management (ISM) Code

Convention for the Safety of Life at Sea (SOLAS) 

Standards of Training Certification and Watchkeeping (STCW)

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is this course for?

All relevant ship or shore-based personnel requiring an introduction to ship safety equipment and procedures.

Is previous experience required?

No previous experience is required.

How will this course benefit me?

This course aims to describe the life-saving, fire safety and navigational safety control measures associated with ship safety, explain the importance of a safety culture and describe the environmental impact from shipping.

How will this course benefit my company?

By providing personnel with an understanding of ship safety equipment and processes as well as environmental awareness to reduce the risk of incidents

What standards are referred to in this course?

The International Convention for the Safety of Life at Sea (SOLAS)

International Code for the Application of Fire Test Procedure

The Convention on the International Regulations for Preventing Collisions at Sea (COLREGs)

The International Convention on Standards of Training, Certification and Watchkeeping for Seafarers (STCW)

IMO Guidelines for Voyage Planning

IMO Recommendation on Weather Routing

The International Safety Management (ISM) Code

The International Convention for the Prevention of Pollution from Ships (MARPOL)

The International Bulk Chemical Code (IBCC)

The International Maritime Dangerous Goods (IMDG) Code

International Convention for the Control and Management of Ships' Ballast Water and Sediments

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%. 

Who is this course for?

All relevant ship or shore-based personnel requiring an introduction to ship safety equipment and procedures.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course aims to identify the conventions and regulations related to ship safety and to describe the safety issues related to the structural integrity and stability of ships.

How will this course benefit my company?

By providing personnel with a general understanding of ship safety enabling them to competently identify the required safety regulations.

What standards are referred to in this course?

• The ISM Code

• The STCW

• The SOLAS Convention

• MARPOL

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is the course for?

All personnel on board.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course will provide learners with awareness on how to prepare for heavy weather and protect the safety of the ship and all personnel on board.

How will the course benefit my company?

The course will ensure that learners are following best practice as detailed in national and international legislation, as well as their company procedures.

What standards are referenced in the course?

International Safety Management (ISM) Code

Cargo Securing Manual (CSM)

Code of Safe Working Practices (CoSWP)

The ICS Bridge Procedures Guide

Safety of Life at Sea Convention (SOLAS)

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is this course for?

All relevant personnel.

Is previous experience required?

No experience is required to complete this course.

How will the course benefit me? 

Learners will gain knowledge about ergonomic principles that can help prevent musculoskeletal disorders, reduce the risk of injuries, and promote overall physical well-being.

How will the course benefit my company? 

Learners will be able to describe ergonomic principles that will help in creating safer work environments, reducing the risk of workplace injuries.

What standards are referenced in the course? 

• The Norwegian Working Environment Act

• The Regulations on Organisation, Management, and Participation

Is there an assessment? 

Yes

Learning Objectives:

• Explain what ergonomics is and its significance in the workplace

• Identify the correct ergonomic working techniques 

• Explain the importance of the environment in improving ergonomics

• Identify additional measures to improve ergonomics

• Recognise who is responsible for reducing workplace injuries

Who is this course for?

All personnel who require basic personal survival knowledge and/or refreshed on the topic.

Is previous experience required?

You do not need prior knowledge or experience to complete this course. 

How will this course benefit me?

This course gives the learner a basic understanding of the correct behaviour in the event of emergency and an overview of the different types of rescue craft, life rafts, and lifeboats as well as personal lifesaving appliances and emergency alert devices.

How will this course benefit my company?

By ensuring you have a basic understanding of the  correct behaviour in the event of emergency and an overview of the different types of rescue craft, life rafts, and lifeboats as well as personal lifesaving appliances and emergency alert devices.

What standards are referred to in this course?

The course is based upon the STCW Personal Survival Techniques (A-VI/1-1).

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

All personnel who require basic fire safety knowledge and/or refreshed on the topic.

Is previous experience required?

You do not need prior knowledge or experience to complete this course. 

How will this course benefit me?

This course gives the learner a basic understanding of the various fundamentals of fire prevention, detection and extinguishing methods, as well as personal protective equipment for firefighting. 

How will this course benefit my company?

By ensuring you have a basic understanding of the various fundamentals of fire prevention, detection and extinguishing methods, as well as personal protective equipment for firefighting. 

What standards are referred to in this course?

The course is based upon the STCW Basic Fire Fighting (A-VI/1-2)

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is the course for?

Personnel who are responsible for maintaining mechanical equipment.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course will provide you with an introduction to the role of lubrication systems in maintaining mechanical equipment.

How will the course benefit my company?

This course will provide personnel with an introduction to the role of lubrication systems in maintaining mechanical equipment.

What standards are referenced in the course?

This course does not refer to specific legislation or standards.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is the course for?

This FSE High and Low Voltage Training course is suitable for everyone working on low and high voltage installations.

Is previous experience required?

You do not need prior knowledge or experience to complete this course, but it is assumed that you are competent in your designated role.

How will the course benefit me?

The course meets the requirements set in Section 7 of the ‘Safety Regulations for Work and Operation of Electrical Equipment and Installations – FSE’ which is that all relevant personnel undertake annual training and instruction in FSE. The course also provides the necessary training and instruction in first aid, focusing on electrical injuries, with the exception of the mandatory practical training in cardiopulmonary resuscitation (CPR).

The regulations of various authorities make FSE applicable to all those working with electricity, whether on board ship, on platforms or on land. This course is suitable for all, regardless of which industry you work in.

The authorities require that training in FSE and first aid in the event of electrical accidents is undertaken at least once a year. No more than 12 months shall elapse between training courses.

How will the course benefit my company?

By ensuring you have the knowledge and competence to be working on low and high voltage installations.

What standards are referenced in the course?

• Safety Regulations for Work and Operation of Electrical Equipment and Installations – FSE

• Standards of Training, Certification and Watchkeeping

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is this course for?

This course is aimed at all personnel on any type of vessel.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

The learner will be able to identify the requirements of the MARPOL Convention and the impact of pollution on marine ecosystems.

How will this course benefit my company?

Learners will have a knowledge of the international pollution prevention requirements required for all personnel.

What standards are referred to in this course?

The International Convention for the Prevention of Pollution from Ships (MARPOL)

Is there an assessment?

Course assessment with a 70% pass mark and two attempts.

Written communications are a necessary part of a manager’s daily work. Whether responding to emails, composing performance reviews for team members, editing an industry report, or crafting a letter to a client, you probably spend a lot of time on writing. For some people, this work comes naturally, but for others, it can be a chore. Becoming a strong writer takes time and practice. But the benefits are worth the effort. As you improve, you’ll be able to structure and “sell” your ideas more easily and your messages will be better received. Let’s look at some fundamental guidelines you can use to make your writing more powerful and effective.

• Learn the importance of thinking before writing   

• Write conversationally     

• Use active voice in your sentences

Who is the course for?

All personnel involved in carrying out tasks under a Permit to Work system and those responsible for the Control of Work.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course will provide learners with an overview of the requirements and operation of a typical Permit to Work system

How will the course benefit my company?

By ensuring that personnel are familiar with the requirements and operation of a typical Permit to Work system.

What standards are referenced in the course?

The International Maritime Organization (IMO)

Health and Safety at Work Act

Is there an assessment? 

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is the course for?

This course is for personnel who are required to carry out welding operations in the maritime industry.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course will give a basic overview of industry best practice in relation to welding operations in the maritime industry.

How will the course benefit my company?

This course will provide personnel with a basic overview of industry best practice in relation to safety in welding operations.

What standards are referenced in the course?

• The International Convention for the Safety of Life at Sea (SOLAS)

• IMO MSC/Circular 1084 Principles for Hot Work on board all Types of Ships

Is there an assessment?

Yes

Who is this course for:
Every seafarer without designated security duties (STCW Table A-VI/6-1)

Is previous experience required?
You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?
Piracy and armed robbery is a real threat to seafarer’s onboard ships and mobile units at sea. 1st January 2014 a requirement about seafarer’s security training was put in force for all ships to which the ISPS Code applies.

The training consists of an e-learning course and the performance of certain on board activities described in a checklist. The client’s approved instructors must sign completed checklists for each trainee.

When the training is completed a certificate is issued by the Norwegian Maritime Authority.

How will this course benefit my company?
By ensuring you have the knowledge and are certified according to the STCW regulations.

What standards are referred to in this course?
STCW - Security Awareness, table A-VI/6-1
This training programme in Ship Security Awareness has been approved by the Norwegian Maritime Authority.

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

This FSE High and Low Voltage Training course is suitable for everyone working on low and high voltage installations.

Is previous experience required?

You do not need prior knowledge or experience to complete this course, but it is assumed that you are competent in your designated role.

How will this course benefit me?

The course meets the requirements set in Section 7 of the ‘Safety Regulations for Work and Operation of Electrical Equipment and Installations – FSE’ which is that all relevant personnel undertake annual training and instruction in FSE. The course also provides the necessary training and instruction in first aid, focusing on electrical injuries, with the exception of the mandatory practical training in cardiopulmonary resuscitation (CPR).

The regulations of various authorities make FSE applicable to all those working with electricity, whether on board ship, on platforms or on land. This course is suitable for all, regardless of which industry you work in.

The authorities require that training in FSE and first aid in the event of electrical accidents is undertaken at least once a year. No more than 12 months shall elapse between training courses.

How will this course benefit my company?

By ensuring you have the knowledge and competence to be working on low and high voltage installations.

What standards are referred to in this course?

• Section 7 of the ‘Safety Regulations for Work and Operation of Electrical Equipment and Installations – FSE’

• The European standard

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for:
Every seafarer with designated security duties (STCW Table A-VI/6-2)

Is previous experience required?
You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?
Piracy and armed robbery is a real threat to seafarer’s onboard ships and mobile units at sea. 1st January 2014 a requirement about seafarer’s security training was put in force for all ships to which the ISPS Code applies.
The training consists of an e-learning course and the performance of certain on board activities described in a checklist. The client’s approved instructors must sign completed checklists for each trainee. When the training is completed a certificate is issued by the Norwegian Maritime Authority.

This course will be a part of a blended learning in two stages:
The first stage is this e-learning course
The second stage will be on board training reflecting the realities on-board the vessel you are serving on. This training might take a couple of weeks or more to complete, as you will be required to participate in a number of drills.

The training will be complete when all the elements of the checklist pertaining to your designated security duties.

Completion of this course requires that you are employed in a company that has a plan in place for on board training for this kind of activities. Contact Mintra for more information about how to complete this training.

The course will not be approved for private individuals.

How will this course benefit my company?
By ensuring you have the knowledge and are certified according to the STCW regulations.

What standards are referred to in this course?
STCW - Security Awareness, table A-VI/6-2
SOLAS - Safety of Life at Sea
MARPOL - Marine Pollution
ISM Code

This training programme in Designated Security Duties is approved by the Norwegian Maritime Authority.

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is the course for?

Deck Officers.

Is previous experience required?

Previous navigational knowledge is recommended.

How will the course benefit me?

By enabling you to confidently assess navigational situations based on the involved vessels and making sound decisions to avoid collisions based on the appropriate rules.

How will the course benefit my company?

By ensuring navigational officers are able to correctly handle close quarter situations and minimising the risk of collision and non-conformities of vessels.

What standards are referenced in the course?

International Regulations for preventing Collisions at Sea

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is the course for?

All personnel who work in the maritime industry and would benefit from an awareness of the International Ship and Port Facility Security (ISPS) Code.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course aims to provide an overview of the International Ship and Port Facility Security (ISPS) Code.

How will the course benefit my company?

The course will benefit companies by ensuring that all relevant personnel have an understanding of the International Ship and Port Facility Security (ISPS) Code, the security attacks that can occur at sea and how to act in an emergency situation.

What standards are referenced in the course?

International Convention for the Safety of Life at Sea (SOLAS)

The International Ship and Port Facility Security (ISPS) Code

Is there an assessment? 

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

This course is suitable for personnel at all levels within an organisation.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

The Code of Conduct course provides an overview of the common values that govern responsible corporate practice and personal behaviour in a company.

How will this course benefit my company?

By ensuring awareness of common values that govern responsible corporate practice and personal behaviour in a company.

What standards are referred to in this course?

• The US Foreign Corrupt Practices Act (FCPA)

• The UK Bribery Act

• The OECD Convention on Combating Bribery of Foreign Public Officials

• The UN Convention Against Corruption

• The Norwegian Equality and Anti-Discrimination Act

• The EU antitrust law

• The US antitrust law

• The Norwegian Transparency Act

• The International Bill of Human Rights

• The UN Guiding Principles on Business and Human Rights

• The International Labour Organization (ILO) Declaration on Fundamental Principles and Rights at Work

• The UK Modern Slavery Act

• The UK Employment Act

• The UK Equality Act

Is there an assessment?

Yes

Who is this course for?

Personnel requiring an introduction to or awareness of the Maritime Labour Convention.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course is designed to give an overall understanding of the Maritime Labour Convention and its importance to you as a seafarer or as a person with responsibilities relating to seafarers.

How will this course benefit my company?

By ensuring you have an overall understanding of the Maritime Labour Convention.

What standards are referred to in this course?

Maritime Labour Convention (MLC2006)

The ILO’s Declaration on Fundamental Principles and Rights at Work

Is there an assessment?

Yes

Who is the course for?

Personnel requiring knowledge or awareness of hot work hazards and controls.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course aims to provide learners with an awareness of best practice in relation to hot work.

How will the course benefit my company?

By ensuring you are aware of best practice in relation to hot work at sea.

What standards are referenced in the course?

• International Safey Management (ISM) Code

• Code of Safe Working Practices for Merchant Seafarers (COSWP)

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is this course for?
All personnel who are at risk for being exposed to benzene.

Is previous experience required?
You do not need prior knowledge or experience to complete this course.

How will this course benefit me?
This course aims to provide learners with an awareness of benzene and provide best practice for work with benzene in oil and gas producing facilities.

How will this course benefit my company?
By ensuring you are aware of the impacts of benzene and familiar with best practice for work with benzene.

What standards are referred to in this course?
Norwegian Oil&Gas circulars NOG 130, 131&133
SOLAS - II/2/16.3.2
IMO circulars 1095 and 1220

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is this course for?

This eLearning course is aimed at individuals required to work using display screen equipment, such as a computer, laptop or tablet.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course will give you a basic understanding of the key health risks associated with display screen equipment and what you can do to mitigate them.

How will this course benefit my company?

By ensuring you are fully aware of how to avoid injury while working at your computer, you can help reduce the number of lost workdays and hours due to health issues.

What standards are referred to in this course?

Health and Safety (Display Screen Equipment) Regulations

Is there an assessment?

Yes

Accreditation:

This course is approved by the Institution of Occupational Safety and Health (IOSH).

IOSH is the world’s Chartered body for safety and health professionals.

What that means:

We are the largest membership body for health and safety professionals.

We champion occupational safety and health causes and advocate for change.

We advise governments, NGOs and policymakers.

We facilitate safety and health awareness training in around 130 countries through IOSH Services Ltd, our wholly-owned trading arm.

We commission research and set national and international standards.

We shape the future of the profession.

Who is the course for?

All Maritime personnel who may use ladders.

Is previous experience required?

No prior knowledge or experience is required to complete this course.

How will the course benefit me?

This course will provide knowledge on how to avoid risk when using ladders.

How will the course benefit my company?

This course is intended to help prevent loss time accidents.

What standards are referenced in the course?

• National Institute for Occupational Safety and Health (NIOSH) 

• The International Maritime Organization (IMO)

• Code of Safe Working Practises for Merchant Seafarers (COSWP)

• International Convention for the Safety of Life at Sea (SOLAS) 

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is the course for?

Maritime professionals or people seeking to become professionals in the maritime sector.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

The course will introduce key concepts and definitions of International Safety Management System terms and the role of human factors in maritime safety.

How will the course benefit my company?

Human factors have been shown to be the primary contributing cause for up to 70% of maritime accidents (Galieriková, 2019). Understanding of how the human factors are able to contribute in such a way, and identify where they occur is the first step to reducing the number of accidents and incidents, creating a safer and more efficient environment onboard.

What standards are referenced in the course?

•International Safety Management (ISM) Code 

•UK Maritime & Coastguard Agency MGN 520(M) – HUMAN ELEMENT GUIDANCE - PART 2 The Deadly Dozen - 12 Significant People Factors in Maritime Safety

•The Maritime Labour Convention (MLC)

•International Convention on Standards of Training, Certification and Watchkeeping for Seafarers (STCW)

Is there an assessment?

Yes

Course goal: This course aims to increase learners’ awareness of the environmental aspects and impacts related to the Oil and Gas Industry and the actions that can be taken to minimise environmental damage.

Learning Objectives

LO1 Identify the main environmental issues that affect the Oil and Gas industry

LO2 Explain the importance of being an environmentally responsible company

LO3 Explain the company’s commitment to managing environmental issues

LO4 Explain the role of ISO 14001 in environmental management

LO5 Explain the role of the Regulator

LO6 Define what is meant by environmental ‘aspects’ and ‘impacts’

LO7 Identify the activities that can contribute towards atmospheric pollution 

LO8 Identify the activities that can contribute towards water pollution

LO9 Identify typical spill sources

LO10 Describe the environmental effects of chemical discharges

LO11 Identify the sources and impacts of disturbance of the seabed by the Oil and Gas Industry 

LO12 Identify the sources and impacts of noise from oil and gas operations 

LO13 Identify the activities that can generate waste

LO14 Describe ways in which the impact on the environment can be minimised

LO15 Explain that everyone has a role to play in protecting the environment

Who is this course for?

This course is for all personnel involved in the planning, execution or supervision of gas measurement on board.

Is previous experience required?

No previous experience is required to complete this course.

How will this course benefit me?

This course aims to provide learners with an introduction to dangerous atmospheres on board, how to detect and measure toxic and flammable gases, and the precautions and procedures to follow when entering confined spaces, enhancing their safety mindset.

How will this course benefit my company?

This course aims to provide information about the types of gases found in the maritime industry, the hazards involved when dealing with these substances and provides a general knowledge of how these gases are detected and measured in order to reduce incidents related to gas measurement.

What standards are referred to in this course?

• International Convention for the Safety of Life at Sea (SOLAS)

• International Safety Guide for Oil Tankers and Terminals

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is this course for?
Deck Officers and Deck Crew who are involved in using the Emergency Towing Systems (ETS)

Is previous experience required?
No previous experience is required to complete this course. 

How will this course benefit me?
This course aims to provide learners with an introduction to Emergency Towing Systems (ETS) in the Maritime Industry.

How will this course benefit my company?

The course will benefit companies by ensuring that all possible precautions are taken to reduce injury to personnel whilst using the ETS.

What standards are referred to in this course?

• The International Convention for the Safety of Life at Sea

• IMO resolution MSC. 35(63) 

• IMO Resolution MSC. 132(75)

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is the course for?

Any personnel operating galley equipment, such as Cooks or Stewards.

Is previous experience required?

No previous experience is required.

How will the course benefit me?

By providing you with clear guidance for the safe operation of galley equipment to minimise the chance of injury or damage.

How will the course benefit my company?

By minimising the risk for galley equipment related accidents and increasing the safety of a crucial part of each vessel.

What standards are referenced in the course?

International Convention for the Prevention of Pollution from Ships (MARPOL)

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is the course for?

This course is aimed at executives and managers to help them understand the strategic importance of CSR, align it with business goals, and make informed decisions related to sustainability and social responsibility.

Is previous experience required?

No previous experience is required.

How will the course benefit me?

Learners will acquire a thorough understanding of CSR principles and practices across social, environmental and governance dimensions. Participants will gain insights into global sustainability considerations, ensuring that they are well-informed about the broader impact of corporate activities.

How will the course benefit my company?

The course addresses undesirable activities and provides guidelines on ethical decision-making, helping a company mitigate potential legal, financial and reputational risks.

What standards are referenced in the course?

• The UN Guiding Principles on Business and Human Rights

• The International Labour Organization – ILO – Core Conventions

• The United Nations’ Principles for Responsible Investment (PRI)

• The Principles for Sustainable Insurance (PSI)

Is there an assessment?

Exam in TP with 80% pass mark with two attempts. 

Who is the course for?

Deck & Engine officers.

Is previous experience required?

No previous experience is required.

How will the course benefit me?

Providing you with an awareness of the regulations of the Polar Code and how the code helps to address the exceptional circumstances of polar regions.

How will the course benefit my company?

Ensuring personnel are familiar with the International Code for Ships Operating in Polar Waters and comply with its requirements.

What standards are referenced in the course?

•  International Code for Ships Operating in Polar Waters (Polar Code)

• International Convention for the Safety of Life at Sea (SOLAS)

• International Convention for the Prevention of -Pollution from Ships (MARPOL)

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is the course for?

All Maritime personnel who work with hand and power tools.

Is previous experience required?

No prior knowledge or experience is required to complete this course.

How will the course benefit me?

This course will provide knowledge on hand and power tool safety.

How will the course benefit my company?

This course is intended to help prevent lost time accidents.

What standards are referenced in the course?

There are no regulations or standards referenced in this course.

Is there an assessment? 

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is this course for?
All relevant personnel.

Is previous experience required?
You do not need prior knowledge or experience to complete this course.

How will this course benefit me?
This course aims to provide an overview of best practice in relation to drug and alcohol awareness in the workplace.

How will this course benefit my company?
This course provides drug and alcohol awareness, information on company policies, and the effects of alcohol abuse, illegal drug use, and the abuse of prescription drugs.

What standards are referred to in this course?
N/A

Is there an assessment?
Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is the course for?

This course is for personnel involved with mechanical material handling equipment and operation, crane operation, rigging, supervision and signalling related activities.

Is previous experience required?

No prior knowledge or experience is required to complete this course.

How will the course benefit me?

This course will provide learners with an awareness of industry best practice for working with cranes.

How will the course benefit my company?

This course will benefit your company by ensuring that personnel have an awareness of industry best practice for working with cranes.

What standards are referenced in the course?

•The Lifting Operations and Lifting Equipment Regulations (LOLER)

•The Provision and Use of Work Equipment Regulations (PUWER)

•The Safe Use of Lifting Equipment: Approved Code of Practice (ACOP)

•Lifting Equipment at Work Guidance

•Personal Protective Equipment at Work Regulations

•Health and Safety at Work Act s.16

•Management of Health and Safety at Work Regulations

•International Maritime Organization (IMO)

•Norwegian Marine Authority Regulation No. 31 on cranes used on ships in open waters for loading and unloading

Is there an assessment?

Yes, 70%

Who is this course for?

Ship Officers

Is previous experience required?

Documented 12 months seaservice as an officer onboard an ISPS vessel. 

How will this course benefit me?

After successfully completing this course, you should be able to undertake the duties and responsibilities of a Ship Security Officer, as defined in section A/12.2 of the ISPS Code and in section A-VI/5 of the STCW Code. The course enables you to maintain and supervise the implementation of the Ship Security Plan, evaluate the security risk, threat and vulnerability, make regular inspections to ensure that appropriate safeguards are implemented and maintained, and ensure that the security systems are operated, tested and calibrated correctly.

How will this course benefit my company?

By ensuring you are qualified and certified as a Ship Security Officer (SSO).

What standards are referred to in this course?

STCW A-VI/5 and ISPS code section A/12.2.

The course is approved by the Norwegian maritime Authority. Approved certificate as Ship Security Officer will be issued upon course completion.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%. 

This course is a combined training consisting of: Elearning and onboard training (exercises and checklists).

To complete the course, it is required that you are employed by a company which has a plan for onboard training with these kind of activities.

The course will not be approved for any persons without a connection to a company as described above.

Who is this course for?

Everyone working on low voltage installations.

Is previous experience required?

You do not need prior knowledge or experience to complete this course and it is assumed that you are competent in your designated role

How will this course benefit me?

The course meets the requirements set in § 7 of the "Safety Regulations for Work and Operation of Electrical Equipment and Installations- FSE", that relevant personnel shall be given annual training and instruction in FSE. The course also provides the necessary training and instruction in first aid, focusing on electrical injuries, with the exception of the mandatory practical training in cardio-pulmonary resuscitation (CPR).

The regulations of various authorities make FSE applicable to all those working with electricity, whether on board ship, on platforms or on land. This course is suitable for all, regardless of which industry you work in.

The authorities require that training in FSE and first aid in the event of electrical accidents is undertaken at least once a year. No more than 12 months shall elapse between training courses.

How will this course benefit my company?

By ensuring you have the knowledge and competence to be working on low voltage installations.

What standards are referred to in this course?

§ 7 of the "Safety Regulations for Work and Operation of Electrical Equipment and Installations- FSE".

Is there an assessment?

The fast track version of the FSE course starts with a pre-test which checks the participant's knowledge of FSE. Depending on the answers given, the participant will get a course that is tailored to the level of knowledge revealed in the pre-test. The fast track version of the course is suitable for all but is particularly practical for those undertaking refresher training in FSE. 

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 80%.

Who is the course for?

Junior Officers and crew who are involved in tanker operations on board, to further their understanding of operating procedures, safety and associated documentation and/or checklists.

Is previous experience required?

This course requires no previous experience to complete.

How will the course benefit me?

This course will give learners an awareness of the safety considerations for tanker operations.

How will the course benefit my company?

The course will ensure that learners are following best practice as detailed in national and international legislation as well as company procedures.

What standards are referenced in the course?

• The International Safety Management (ISM) Code

• The Oil Companies International Marine Forum (OCIMF)

• The International Convention for the Prevention of Pollution from Ships (MARPOL)

• The Oil Pollution Act 1990 (OPA90) for operating in US waters

• International Convention on Standards of Training, Certification and Watchkeeping for Seafarers (STCW)

• International Safety Guide for Oil Tankers and Terminals (ISGOTT)

• The International Convention for the Safety of Life at Sea (SOLAS)

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is this course for?

Any person conducting an in-service assessment of the competence of an on-oboard candidate.

Is previous experience required?

You do not need prior knowledge or experience to complete this course. 

How will this course benefit me?

The aim of this course is to enable you as an on-board assessor to supervise the training and monitor the competence of seafarers. A seafarer's competence must meet the standards of the STCW Code.

This course is approved by  the Norwegian Maritime Authority (NMA) on behalf of IMO.

This course will be a part of a blended learning in two stages:

- The first stage is this e-learning course

- The second stage will be the on-board workbook

The training will be complete when all the elements of the checklist pertaining to your on-board assessor

How will this course benefit my company?

By ensuring you are qualified and certified as an Onboard Assessor. 

What standards are referred to in this course?

STCW Onboard Assessor (A-I/6)

This course is approved by the Norwegian maritime Authority (NMA)

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

This course is a combined training consisting of: Elearning and onboard training (exercises and checklists).

IMPORTANT

To apply for an Onboard Assessor STCW course, The Candidate will need to have a Norwegian D-number.

The documentation including the checklist should be sent to STCW@mintra.com, and Mintra will notify the Norwegian Maritime Authority when the course has been successfully completed.

Thereafter, the candidate will have to apply directly to the NMA to receive the Onboard Assessor certificate with reference to the STCW code. 

Who is the course for?

Maintenance crew.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

By providing you with an awareness of pump construction and operation.

How will the course benefit my company?

By providing personnel with an awareness of pump construction and operation to ensure that pumps are maintained in a good condition

What standards are referenced in the course?

This course does not refer to specific legislation or standards.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is the course for?

Personnel responsible for cooking, preparing or handling food and others working in the kitchen/galley/dining areas.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

This course will provide you with an introduction to industry best practice in relation to food safety, health and hygiene.

How will the course benefit my company?

This course will provide personnel with an introduction to industry best practice in relation food safety, health and hygiene and help reinforce the importance of good food safety practices in the workplace.

What standards are referenced in the course?

This course does not refer to specific legislation or standards.

Is there an assessment? 

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is the course for?

Deck crew and personnel who require knowledge on the inventory and storage of paints and coatings.

Is previous experience required?

No previous experience is required to complete this course.

How will the course benefit me?

By providing you with a basic understanding on the inventory and storage requirements of paints and coatings.

How will the course benefit my company?

By providing personnel with a basic understanding on the inventory and storage requirements of paints and coatings.

What standards are referenced in the course?

• The International Convention for the Safety of Life at Sea (SOLAS)

• The Hong Kong International Convention for the Safe and Environmentally Sound Recycling of Ships

• The European Union Ship Recycling Regulation

• Resolution MEPC.269(68) Guidelines for the Development of the Inventory of Hazardous Materials

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is the course for?

Any officer of the watch looking for an easy-to-follow supplement or refresher to the IMO generic course (IMO Model Course 1.27) and anyone requiring knowledge of the general features of ECDIS.

Is previous experience required?

No previous experience is required to complete this course. Basic nautical knowledge including an understanding of terrestrial and electronic navigation is recommended.

How will the course benefit me?

By providing you with the general features of an ECDIS, its strengths and limitations and hands-on knowledge about the most common features and functionalities all ECDIS have.

How will the course benefit my company?

By improving the officer’s general understanding of an ECDIS as a computer-based navigation system and its role as part of a navigational watch, thus improving the performance and safety of navigation.

What standards are referenced in the course?

This course does not refer to specific legislation or standards.

Is there an assessment?

Once you have completed the course, you will be asked a series of questions to check your knowledge and understanding. These are based on the learning objectives for the course and have a pass mark of 70%.

Who is this course for?
This course is aimed at personnel who routinely process personal data, such as IT or HR staff.

Is previous experience required?
You do not need prior knowledge or experience to complete this course. 

How will this course benefit me?
Complying with the GDPR is mandatory for organisations processing personal data in the EU or EEA and for organisations processing the personal data of EU and EEA residents from abroad. This course introduces the principles and rights enshrined in the GDPR and the obligations organisations have to comply with it.  

How will this course benefit my company?
It will ensure you have an awareness of how you and your organisation must comply with the GDPR.

What standards are referred to in this course?
The EU General Data Protection Regulation (GDPR)

Is there an assessment?
Exam in TP with 80% pass mark with two attempts.